Question about 1997 Jeep Grand Cherokee

1 Answer

Serpantine belt broke, fan is wingling - 1997 Jeep Grand Cherokee

Posted by on

  • Richard Scordino May 11, 2010

    OK, so replace the belt and replace the wingling part with a new one that does not wingle!

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,317 Answers

Sounds like the water pump bearings on the shaft has gone bad, causing the shaft to wiggle.

Posted on Apr 27, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need a diagram of how the fan belt runs on o ford 1.3 with a air con and power steering


Hi try this one if not look up serpantine belt diagrams on Internet. Regards Jim...
5_6_2015_7_17_51_am.jpg

May 06, 2015 | Ford Cars & Trucks

1 Answer

Serpantine belt came off


Belt pulley and belt tensioner. Belt pulley is fxhed and tensioner is movable. You need to have belt tensioner relased of the pressure using belt tool (long handle and 15'' wrench) .. Then you can folow belt routing diagram located on fan shroud or underneath front hood!

Feb 05, 2014 | 1998 Ford Windstar

2 Answers

Remove clutch fan dodge dakpta 4.7


This one does require a tool to loosen the fan clutch from the water pump shaft. Part of the tool holds the pulley and the other part is spanner wrench used to loosen the clutch. An important note on these fan clutches: Once you have the fan clutch off DO NOT let it lay with the rear side of the fan pointing downward as the silicone fluid that provides the "clutch" action can drain into the bearing and cause the clutch not to work. Once you have the clutch off just lean the fan and clutch against something so it is standing upright just as it is when it's bolted to the water pump until you are ready to put it back on. Hope this helps you out a bit!

Jul 11, 2010 | 2001 Dodge Dakota

1 Answer

How do you remove a dodge caliber serpantine belt?


take an 11/16 wrench and turn tensioner pulley towards cockpit then slip the belt off of the top idler pulley

Jun 02, 2010 | 2007 Dodge Caliber SXT Sport Hatchback

1 Answer

Need daigram for delta 88 3.8 serpantine belt.


if the old belt is still on, its quicker if you just trace how the belt goes around the different pullies on a piece of paper, or take a digital photo of the belt. that way you how to install the new one.

Dec 18, 2009 | 1995 Oldsmobile 88

1 Answer

2000 nissan maxima serpantine belt replacement


the serp belt tensioner is a 12mm or 13 mm bolt that your loosen and move the alternator forward to slack the belt

Sep 01, 2009 | 2000 Nissan Maxima

1 Answer

My 2002 pt cruiser lost power steering suddenly


check to see if the serpantine belt is still there. It sounds like like it broke. this belt runs all of the accesories on the vehicle including the water pump. So if this happened it probably starting running hot too

Jun 23, 2009 | 2002 Chrysler PT Cruiser

1 Answer

Serpantine belt broke


there is usally a diagram on either the hood or the radiator core support. now to loosen something there is a idler pulley with a 3/8" drive end in the center of it that will allow you to move the pulley against the tensioner to put the belt on

Apr 12, 2009 | 1990 Cadillac Deville

Not finding what you are looking for?
1997 Jeep Grand Cherokee Logo

Related Topics:

66 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...