Question about 1999 Ford Expedition

1 Answer

How do you get the inside panel off a 1999

I can't get the front passenger window up. How do you get the inside panel off a 1999 expedition front passenger door.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 63 Answers

Not too bad a job to do, taking your time it should take 30-45 minutes. You will need a straight screwdriver, phillips screwdriver, a small set of sockets, a clip removal tool also comes in handy.


Roll down the window before beginning. Now depending on how Detroit was hiding things, you should look in the area of the door pull for screws that fasten the interior door covering to the door. These might be exposed but usually are hidden under plastic caps or trim parts. Very carefully remove this pieces as with age they do become brittle.

Once you are rather sure you have the fastening screws out of the way, using the straight screwdriver to ease the door panel away from the door along the bottom edge. By looking inside you should see one of two methods of fasteners. The older style are simply straight push in plastic clips, you release these by simply putting enough pressure of the panel to pull the clips out. The newer method has a clip that slides down about a 1/2 inch into a matching hole. These panels are removed by lifting up on the door panel and then out.

Installation is just a reversal of the removal procedure.

Posted on Apr 27, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Front passenger window only goes up. front passenger door switch or driver door switch only operate window up. all other windows fine.


if you make a fist and hit the door on the inside about the middle of the door card HARD while holding the button and it goes down -you have a bad regulator motor- if that doesn't do anything it may be the swicth in the passangers door but i really suspect the motor-cheers Denny

Nov 03, 2013 | 2000 Ford Expedition

1 Answer

My front passenger side power window is off the track and I don't know how to get to it. Could you please tell me how to do it. Thanks!


You most likely have a broken window regulator

You will have to remove the inner door panel

That you will have to figure out for yourself


A few screws here and there and maybe a few
plastic xmas trees inside

Feb 23, 2011 | 1999 Ford Expedition

2 Answers

My 98 Ford expedition Eb 5.4L front passenger window wont roll down by using the front passenger control switch eventhough the driver side window control switch is in the unlock position. The fuses are not...


what happened in my 2002 Exp, because they slam the door, the wire broke off switch that power downs the window, but if not that the switch mite be screwed, or you mite have a broken in the door where it opens an closes....

Mar 31, 2010 | 1998 Ford Expedition

1 Answer

Diagram on how to take off left door panel on 1998 ford expedition


REMOVAL AND INSTALLATION Trim Panel —Front Door, Expedition Removal
  1. NOTE: Release the top portion first.
    Remove the sail panel.
cff7e48.gif
  1. Remove the window regulator switch plate (14524). 3745193.gif

  1. Disconnect the electrical connectors.
d860af8.gif
  1. Remove the upper door trim panel screw. 4b4377b.gif

  1. Remove the door trim panel screw at the window regulator switch plate opening. 149d0a6.gif
  1. Remove the door trim panel screw in the courtesy lamp housing.
    1. Remove the courtesy lamp lens.
    1. Remove the screw. 8fe707b.gif

  1. Remove the inside door handle trim cover. 52f3d0f.gif
  1. Remove the inside door handle.
    • Remove the bolt. abe462f.gif
  1. swj~us~en~file=ani_caut.gif~gen~ref.gif CAUTION: To avoid damage to the front door trim panel, do not pull directly outward.
    Lift upward and then outward to remove the front door trim panel (23943). d6459fb.gif
  1. Remove the courtesy lamp and socket. dfb380f.gif
  1. Disconnect the power mirror electrical connector.
Installation
  1. Connect the power mirror electrical connector.
  1. Install the courtesy lamp and socket.
  1. Install the front door trim panel.
  1. Install the inside door handle.
    • Install the bolt.
  1. Install the inside door handle trim cover.
  1. Install the door trim panel screw in the courtesy lamp housing.
    1. Install the screw.
    1. Install the courtesy lamp lens.
  1. Install the door trim panel screw at the window regulator switch plate opening.
  1. Install the upper door trim panel screw.
  1. Connect the electrical connectors.
  1. NOTE: If a new trim panel is required: Some new trim panels have a cut out opening for the window switchplate that is larger than that on the original trim panel. When installing a new trim panel, install the window switchplate in the following sequence to make sure that the switchplate is secured fully into the door trim panel.
    Install the window regulator switchplate.
    • Insert the rear switchplate clip into the trim panel opening.
    • Install the forward and side clips into the trim panel opening.
  1. NOTE: Install the lower portion first.
    Install the sail panel.

Mar 14, 2010 | 1998 Ford Expedition

1 Answer

The door insides are rattling as a result of


sounds like the window regulator broke or it came loose or your linkage came loose. you have to try to look inside the window opening to see whats jaming it and try to use a coat hanger to move it away to open door so you can remove the door panel,heres some diagrams to help you.you can also try to remove the panel with the door closed if you cant open it but you may have to pry it off,226db0d.gifd0b85f8.gifbae3440.gif

Feb 11, 2010 | 2003 Ford Expedition

1 Answer

How to install passenger side view mirror Ford


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door

Sep 16, 2009 | 2004 Ford Expedition

3 Answers

Instructions on how to install window regulator on 99 Expedition


Answer
Here is the procedure, the "dimples" are on the metal surface of the inside of the door. With the waterscreen off you can locate the motor to help you tell where the dimples are. Drill holes then use a socket to remove window motor bolts.

Front Door Window Regulator Motor
Removal and Installation

Raise the front door window glass to the full up position.
Remove the front door trim panel.
Remove the door speaker.
Position the watershield aside.
CAUTION: Make sure the electrical connector is positioned aside before drilling.

To access the power window motor bolts, use a 19 mm (3/4-in) hole saw with a 8 mm (1/4-in) pilot to drill three holes at the existing drill dimples on the door.

Disconnect the front door window regulator electrical connector.

Remove the bolts and the front door window regulator motor.

To install, reverse the removal procedure.
Cycle the window glass to make sure the gears engage

Jun 22, 2009 | 1999 Ford Expedition

1 Answer

Looks like window fell of the track rail


did you remove the screw in the arm rest if you did pull up on the panel from the front bottom

May 01, 2009 | 2000 Ford Expedition

1 Answer

2001 Ford Expedition window came off track


You did not mention whether it was a front or rear door? I assume its a front because u stated no screws.

Here are instructions for front door:

Remove the plastic trim from behind mirror(just snaps on).
Remove the window switch panel(just snaps on).
Remove the screw behind the mirror cover.
Remove the screw behind the window switch panel.
Remove the courtesy lamp lens.
Remove the screw in the courtesy lamp housing.
Remove the inside door handle trim cover.
Remove the inside door handle bolt.
Lift upward and then outward to remove the front door trim panel

Feb 10, 2009 | 2001 Ford Expedition

1 Answer

1999 ford expedition with a passenger, front window stuck in the down possition


Hi,

Initially, try to determine which fuse goes to the power window. Check and replace if necessary.

In brief for a temporary remedy just to have the window closed: remove the triangular cover at the top front of the door behind the mirror, there should be a screw there; remove the trim around the door handle another screw, remove the cover of the courtesy light at the bottom of the door, there is another screw behind that; soon as all the screws are out, lift/push up on the door panel and pull off. This would grant you access to the mechanism controlling the window. You can try closing by manually turning the motor.

Thereafter, pls determine if it is the motor or the switch(es) has failed. Replacements are available here.

Incidentally, here is a nice tutorial on repairs of power windows in general.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Thank you for using FixYa.

May 31, 2008 | 1999 Ford Expedition

Not finding what you are looking for?
1999 Ford Expedition Logo

81 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...