Question about Cadillac DeVille

2 Answers

I removed the steering wheel from my 89 sedan de ville and all of the smaller parts popped out when the wheel came off the shaft. I need a blow up diagram on the reintallation of the wheel and the components inside the steering column.

Posted by on

  • sdjett Apr 26, 2010

    Buying a manual for a car that I am selling is a last resort.

  • sdjett Apr 27, 2010

    Thanks jambanshee



2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,489 Answers

Email me at and I will getbthem right to you

Posted on Apr 27, 2010


  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Master
  • 4,472 Answers

The factory service manual will give you step by step instructions on every possible repair for the vehicle. Sometimes they can be costly but in this case they are actually quite cheap as low as 15$ on ebay. This would be the best investment you could make when repairing your own vehicle.
If you have any other questions let me know.
Thank you,

Posted on Apr 26, 2010

  • Lee A.
    Lee A. Apr 27, 2010

    That is the best place to find the diagram, especially for the price.
    Good luck,



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Remove steering column

why not say reason.. ??? is the actual shaft bad,
or just swapping out the whole thing.> with igntion switch and combo switch?
the whole inside parts?
are you removing the steering wheel ?

first hard part is air bags, very dangerous.
and the coil spring, in wheel hub. easy to damage that.
first off major work , you need the FSM. why not get it and read it.

if no bags , good. easier.
the other issue is the
there are 3 critical steps.
1: Bags.
2: ignition switch assy, anthieft screws.
3: collapsible shaft, possible damage.
4: the steering wheel puller and steps. the FSM covers each separately.

wheel. quote
  1. Disconnect the negative battery cable and disable the air bag system.
  2. Set the front tires in a straight-ahead position.

  1. Remove the air bag module retaining nuts from behind the steering wheel.
  2. Remove the air bag module. Defeated first !!!!
  3. If equipped, remove the cruise control switch.
  4. Disconnect the horn wiring.
  5. Remove the steering wheel retaining nut.
  6. Scribe a line mark on the steering wheel and steering shaft if there is not one already.
  7. Remove the steering wheel using a suitable puller.
  8. the palm smacking trick can get the wheel off if lucky.
To install:
  1. To install, align the scribe marks on the steering shaft with the steering wheel.
  2. Ensure the wheel compresses the 2 locktabs on the clockspring.
  3. Pull the air bag and if equipped, cruise control wires through the larger hole and horn wire through the smaller hole. Ensure they are not pinched.
  4. Install the steering wheel nut and tighten it to 45 ft. lbs. (61 Nm) while forcing the steering wheel down the shaft with the nut.
  5. Connect the wire feed to the horn buttons.
  6. Connect the feed wires and tighten the air bag retaining nuts to 90 inch lbs. (10 Nm). Ensure the air bag is completely seated. The latching clip arms must be visible on top of the connector housing on the module.
  7. Enable the air bag system and connect the battery cable.
  8. From the right side of the vehicle (in case of accidental deployment), turn the ignition switch to the ON position.
  9. Check for proper air bag warning light operation.
end quote, get the FSM. there are many more pages, for
the COMBO section, and shaft.

Nov 16, 2013 | 1991 Jeep Cherokee Limited

1 Answer

Replace steering wheel of toyota corolla 1990 model

The steering shaft has splines that allow the steering wheel to be positioned correctly with the front wheels.
Try tapping behind the streering wheel with a hammer to loosen so you can pull the steering wheel off.
If this does not work then you need a wheel puller to pull the steering wheel off the steering shaft.

Jun 10, 2012 | 1990 Toyota Corolla

1 Answer

How hard is it to change the water pump belt on a 1997 cadillac sedan de ville?

Please remember to leave feedback and vote. Good Luck

  1. Install a 1/2 inch drive extension into the belt drive tensioner (6).
  2. Push down on the extension to release tension.
  3. Remove the drive belt from the power steering pump (13
  4. Slowly return the tensioner to the original position.
  5. Remove the belt.

  1. Thread the drive belt through all the pulleys except for the power steering pump (1) and the drive belt tensioner (6).
  2. Insert a 1/2 inch drive extension into the drive belt tensioner.
  3. Push down on the tensioner and feed the belt around the tensioner wheel.
  4. With the tension applied, complete the belt routing. Make sure the belt is properly seated in all pulleys.
  5. Slowly return the tensioner back to its original position. This will apply tension to the drive belt.
  6. After installation, check the belt for proper seating on the pulleys, proper routing and alignment.
  7. Start the engine and check for proper belt and accessory operation.


Jan 20, 2011 | 1997 Cadillac DeVille

1 Answer

How do u remove the stering wheel from a dodge 15oo to replace the whipper control

Disarm the Supplemental RestraintSystem (SRS) (airbag) Remove the airbag assembly. Partially remove the steering wheel retaining bolt. Leave the bolt in the column to push on it. Install a steering wheel puller.(Available at almost any parts store) Remove steering wheel puller, steering wheel and bolt once steering wheel has popped loose from the steering shaft.

Dec 20, 2010 | 2004 Dodge Ram

1 Answer

I need a diagram of how to put a steering column back together

Ok It Possible to download it.. From LimeWire To do So Type
Exemple ..Download Cadillac Sedan de Ville 1986 Steering Diagram utility ..then take the one you need ...Good Luck

Oct 01, 2010 | Cadillac Seville Cars & Trucks

1 Answer

Looking for the firing order for a 89 Caddy De Ville 4.5 engine

Here is the firing order for that vehicle and engine.


Jul 25, 2010 | 1989 Cadillac Sedan DeVille

1 Answer

Hey what exactly does the steering box look like. i bought the part but it doesnt look quite right. its a 89 f250 4x4

if you open hood you can see shaft coming from steering wheel,[get someone to turn wheel and look under hood on left side,the shaft will lead into steering box.

Dec 20, 2009 | 1989 Ford F 150

1 Answer

On my 1994 Cadillac Sedan de Ville, the heater blows cool air but not warm air; however, the defogger does blow hot air.

Sounds like the doors on the heater exchange are not working or are partially blocked.

Nov 03, 2009 | 1994 Cadillac DeVille

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

33 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cadillac Experts


Level 3 Expert

79077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides