Question about 2000 Ford Focus

1 Answer

We replaced the stering column in the car and everything is working but the car still wont start.. All the lights come one we checked all the fuses and nothing. Where is the reset switch located? Or do u know what the problem could be?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Did you reuse the original key,and ignition cylinder? the original key has a chip in it. if your using a diff. key,it needs to be programed so the security system recognizes it.if everything works but it wont crank thats probably the problem. the security light may also flash very fast or poss. stay on constant too.
dealership can do it pretty quickly, but you going to need at least two keys to program. or switch out the ignition lock cylinder with the original one

Posted on Apr 27, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Had to change steering column in my 2004 chevy colorado now the anti-theft lock wont let it start


Check the video doesnt start because you got a different passlock on your stering culuum or put everything from your old culumm on the new that you got key baril

Mar 18, 2015 | Cars & Trucks

2 Answers

1989 ford E 150 wont start after replaceing stering column


You have a main wiring harness that plugs in to the column. Verify this is tight. That harness powers everything, including your ignition. If you removed your ignition and reinserted it into the new column, then verify it is in the correct position and also locked in the correct position. The E-150 could also have the shifter on the column? It is possibly not lined up right and isn't in park. Check shift position and verify it is in park or neutral.

Jul 04, 2014 | Cars & Trucks

1 Answer

Alarm keeps going off key fob wont work


definitely there's a short circuit in your wiring harness, I suggest you to check wiring harness starting from the steering column removing it's covers carefully afterwards you can inspect under the dashboard. Also check the wires starting from battery to the fuses and the main harness which goes inside to the dash board area. Definitely you will get an idea where is the fault.

Apr 16, 2014 | Citroen C8 Cars & Trucks

1 Answer

2003 ford explorer sport track. horn wont turn off. Found fuse box, no fuse in the slot. How do I cut the horn off


pull the wire from horn itself ,the fault is no doubt in the stering column under the steering wheel

Sep 26, 2011 | Cars & Trucks

1 Answer

When i install my key in the ignition and turn it on i have no dash startup or signals so the truck wont start everything works except dash and gauges


check your fuses both places under dash and underhood if not that check if you have spark to the sparkplugs if no then have the brain checked (autozone) checks them for free. if ok then check ignition switch that sits on the stering column

Nov 20, 2009 | 1997 GMC Jimmy

1 Answer

The security sistem locked up my car does not start or move


There is a plug in the stering column that controls that. If you push on the brake then the gear shift will move the plug has malfunctioned and now you can not get key out. if you take off the plastic cover under the stering column and unplug this it should fix the problem. I had the same problem it is a safety switch. once unplugged you will not have to depress the brake to move gears.

Jan 27, 2009 | 2004 Dodge Stratus

2 Answers

Honk won't work and air bag light stays on


in the stering colum behind the stering its call a clock its defectif everything that in the stering wheel goes truth that clock even if you have a cruise control its probably dont work for sure its that all those caravan have that problem hope its a fixya for you and me thanks pierre p.s if you do ourself dont forget to disconnect the battery for the air bag wont deployed

Jul 31, 2008 | 1999 Dodge Caravan

Not finding what you are looking for?
2000 Ford Focus Logo

173 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

79865 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

fordexpert

Level 3 Expert

5687 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...