Question about 1992 Pontiac Grand Am

2 Answers

Can i just take out one oil pump and replace it with a new one with out any ajustments even if it's one unit. and can i buy a oil pump from any auto part sale store for my 92 pontiac grand am quad 4 2.3l

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 580 Answers

All you have to do is replace it & it is available at any good auto store. Good luck!

Posted on Apr 26, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Pontiac Master
  • 12,650 Answers

Oil pump is a bolt in part and can get at most auto stores BUT not easy to access have to remove the oil pan which means either removing engine or jacking up enough to clear cross members that are in way the pump is in the engine block

Posted on Apr 26, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1989 trans am gta, 5.7 ltr tpi, replaced my battery with brand new gell cell, as soon as I connect positive cable ican hear fuel rails prime and continue, started car and after shutting off ignition


If the Oil Sending Unit becomes defective, it often keeps the fuel pump running even after the car's engine is shut off. Replacing the Oil Sending Unit should correct the problem. Believe it or not Pontiac uses the oil sending unit as a back up to power the fuel pump.

Nov 03, 2014 | Cars & Trucks

1 Answer

Can oil pump shaft be ajusted on 2.2 mazda 1987 eng


Change the Oil pump the pump inner bushings are probably worn.

Apr 27, 2014 | 1988 Mazda B2200

1 Answer

Replace oil pump sending unit


Drop the oil pan it a few bolts pull it out and replace buy the part first so u know what ur looking for n buy a new oil pan gasket good luck hope it helps u

Feb 02, 2014 | 2002 GMC Sierra 1500

1 Answer

I have a 1989 gmc s-15, I need to replace the oil pressure sensor, what size socket do I need?


well go to auto parts store buy the oil pressure sending unit then while you at auto parts store you can take new oil pressure sending unit try different size sockets to find the correct size socket you need.

Oct 27, 2013 | 1983 GMC S-15 Pickup

2 Answers

Steering box leak oil


Check with the dealers parts dept,should be
May have to buy more than just the seal
Check the internet sites for the seal

Aug 11, 2013 | 2000 Ford Expedition

2 Answers

Red oil light stays on at high rpm.reads 139 at idle


Check the sending unit for the oil then check the oil pump. I bet on the oil pump being bad.

Feb 20, 2011 | 2005 Buick LeSabre

1 Answer

04 corolla. Oil light comes on. Full of oil.


the oil pump on any car is rarely the cause of low oil pressure. if you remove the oil pressure sending unit and install an oil pressure gauge,even the type you can buy as an add on,and the reading you get is low.the problem is genrally worn out main crankshaft bearings.to avoid unneseary replacement of these,you should buy some plasti-gauge from an auto part store remove the bearing caps one at a time and measure the clearance this way.there is a risk here because the smallest grain off dirt that getts into the bearing, crankshft will ruin the bearing when you restart it.if these are worn out you probabably shoul consider replacing the engine because the other bearings are probably also worn out by this time.

Feb 15, 2010 | 2004 Toyota Corolla

1 Answer

1995 GMC Sierra z71 oil pressure dropped- need advice on this


The oil pump is in the oil pan and needs to be dropped and being a 4WD you also need to drop the front axle pumpkin to remove the oil pan and replace all the gasket needed. Start with the easy and replace the oil pressure sending unit, it's on the back of the engine to the passenger side of the distributor. You can go to Auto Zone and pick up a new Oil sending unit, just make sure your get the right one, "Sending Unit" Looks the same are the oil pressure sensor but the unit reads the pressure, the other just signal a light to go on and off. It's an easy fix like replacing a spark plug. 

Jun 29, 2009 | GMC Sierra 1500 Cars & Trucks

2 Answers

1994 buick regal


More than likely (and we will hope) it is the oil sending unit. In comparison it is a very cheap and quick fix to replacing the oil pump. Auto Zone has a pretty good componet location section that has tips for replacement if you cant find the sending unit or the oil pump. Try that first it may save you a lot of work.

Mar 29, 2009 | 1994 Buick Regal Gran Sport

Not finding what you are looking for?
1992 Pontiac Grand Am Logo

Related Topics:

136 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...