Question about Chevrolet 1500

1 Answer

No it is stuck on the off position i tried everything to get it unstuck

Posted by on

  • wilburn_bran Apr 26, 2010

    it is a 99 chevy v6 1500

  • wilburn_bran Apr 26, 2010

    just wondering if you got my reply

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Chevrolet Master
  • 76,846 Answers

Ok, this makes it a real job, do need the year of the truck.

Posted on Apr 26, 2010

  • 1 more comment 
  • yadayada
    yadayada Apr 26, 2010

    use the EMAIL link u were sent to answer my question about the year, DO NOT POST A NEW PROBLEM

  • yadayada
    yadayada Apr 26, 2010

    ok give me a few to get the info for u

  • yadayada
    yadayada Apr 26, 2010

    The lock cylinders fail quite often on these vehicles. Try this:
    Insert the key into the lock and gently tap the key deeper into the lock with a small hammer. Do not hit it any harder than you would if you were hitting your own thumb...you don't want to break the key, just jar the lock to read the key. The tumblers are stuck. If that does not work, then you will need a locksmith or technician to repair or replace the lock cylinder
    U can't replace the cylinder at home unless the cylinder can be turned to "ON" so above doesn't do it u will need a dealer to do this repair. sorry

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I get the shifter button unstuck? I can't remove the key although I can change gears.


I would start with a short squirt of WD40 around the stuck button and then try to work it, see if it gets unstuck.

Jun 22, 2014 | 1998 Pontiac Sunfire

1 Answer

Door locks stick on and drain battery


One of the switches must be bad or stuck in the lock or unlock position. Try functioning each switch several times in both directions to see if you can get it unstuck or maybe help isolate which switch it is.

May 02, 2011 | 1996 Jeep Cherokee Sport

1 Answer

Cougar4lifcant get my door to close Ive tryed everything the latch is stuck. How do I get the latch to open.


With a decent scrwdriver lightly pry on it and pull on the door handle. This will release the mechanism so you can pop it back into the open position. If you accidently shut the door with the door latch closed you may have to be forceful with it. I have had to do this before with cars that have sat for a while or had frozen in severe weather. Make sure the door is not locked while you are trying to get the latch unstuck.

Hope this helps... Dale

Apr 21, 2011 | 1992 Acura Legend

1 Answer

The seat belt on the driver's side of my '98 Chevy Cavalier is stuck in the door position and won't pull out (it is a manual seat belt). How do I get it unstuck?


Usually when they get stuck you can`t get them unstuck unless they are just twisted.seat belts are not repairable.Your best bet is to go to the salvage yard and get a used one and replace it.

Nov 18, 2009 | 1998 Chevrolet Cavalier

1 Answer

My ford windstar's ignition will not turn to the on position. it appears to be stuck


Try spraying wd40 or some king of lubricant in the key cylinder. Dirt has gotten into the tumber and causing the pins inside to stick. If you get it unstuck either leave the key in and do not turn to lock position or replace the tumbler. I hope this helps. good luck.

Aug 02, 2009 | 2002 Ford Windstar Cargo

1 Answer

I have a 1995 mazda 323 and it has been sitting for 6 months, was it good condition when i parked it. I realize the battery is dead, but it won't even budge when we try to push it in neutral, what could be...


Emergency brake could be stuck in the "ON" position. try rocking the car forward and backward.
Also engage the "E" brake and disengage multiple times to try get it unstuck.

Jan 19, 2009 | 1993 Mazda 323

1 Answer

While driving,my 97 chevy silverado just stopped running.


Yes If You Have To Many Keys On Your Key Ring Your Ignition Can Go Bad Fairly Quick. A Normal Sign Of Your Ignition Going Bad Is Shutting Off While Driving. You May Want To Try Changing Your Ignition Yourself As It Is Extremely Expensive To Have A Dealer Match The Keys And Everything. But If You Don't Wanna Deal With Having A Different Door Key Then The Ignition Key Then Pay The Extra Money.

Jan 05, 2009 | 1998 Chevrolet K1500

1 Answer

1997 VW Golf CL Emergency Brake is stuck!!!


unhook the cable at the drum or caliper make sure lever gose to rest position when cable is removed

Jun 22, 2008 | 1997 Volkswagen Golf

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6918 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...