Question about 1999 Jeep Grand Cherokee

1 Answer

Need headlight lens covers, the plastic has frosted over

Posted by on

  • yadayada
    yadayada May 11, 2010

    U CAN'T JUST REPLACE THE LENS, THE WHOLE HEADLIGHT MUST BE REPLACED

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 30 Answers

Your local dealer can help.....or try one of the auto parts stores.

Posted on Apr 26, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Headlights


you need to replace the
lens or lens-cover. try eagle eye website!

Aug 15, 2013 | 2000 Mercury Villager

1 Answer

2001 avalon plastic headlight covers


The headlights are a sealed assembly; the plastic covers cannot be removed for cleaning. Although there are several methods for "defogging" the plastic lenses, there is no long-term satisfactory solution short of replacement

Feb 18, 2013 | Cars & Trucks

2 Answers

Condensation inside headlight


The problem is caused by the plastic ultrasonic seam welds of the lens to the body of the headlight leaking, there is no correction for this other than replacing the headlight assembly, this is very common.

Aug 09, 2011 | 2003 Oldsmobile Silhouette

1 Answer

How do you replace the headlight on a 2002 Daewoo Lanos


Hi there, together with providing you the solution to the problem, I also took the liberty of going one step further in giving you steps on how to remove the headlight bulb.

  • Find the hood release handle and activate it, the hood should pop open.
  • Once the hood is popped open locate the hood secondary or safety latch and release it. Then finish opening the hood.
  • Locate and remove mounting clips for any plastic shields that cover the headlight lens mounting screws or clips.
  • Some headlight bulbs can be replaced by simply grasping the bulb socket behind the headlight lens and turn it counter clockwise to remove it. This will expose the headlight bulb.
  • If the headlight bulb socket is not accessible the headlight lens may need to be remove or obstructions behind the bulb removed to gain access to the headlight bulb socket.
  • To remove the headlight lens remove all mounting screws and clips that hold the headlight lens in place.
  • After the headlight housing has been removed from it's mounts, release the headlight bulb from the headlight lens housing (turn counter clockwise) the bulb will then come out of the headlight assembly. Once removed, visually verify that the replacement bulb is exactly the same as the failed bulb before to ensure a proper repair.
  • Clean the headlight lens free from all debris to help maintain the seal from the bulb to the lens. This will keep moisture out of the lens.
  • Install the new headlight bulb by turning the retainer ring or bulb clockwise.
  • Re-install the headlight lens housing and reinstall electrical connector.
  • Re-install plastic covers.
After the job is complete turn the ignition key to the "on" position and activate the headlight switch. Observe the newly replaced headlight bulb to ensure proper operation.

Glad to be of help!!!

Jan 21, 2011 | 2002 Daewoo Lanos

1 Answer

How do i remove a 1990 lincoln continental headlight? I need to replace the headlight assemble and i am not sure how to best remove it


OK, do you just need the bulb? Or the whole plastic "clear" lens part that covers the bulb?

If you just need the halogen bulb, it comes out the back of the lens under the hood.

any more details, or how to replace the whole "plastic" part, I would visit my local library.

Dec 17, 2010 | 1990 Lincoln Continental

1 Answer

Can the factory headlight lens covers on a 2001 Mercury Cougar be removed and cleaned ? I can remove the entire healight assembly and change the bulbs, but the inside of the healight cover is dirty and...


The lincoln LS had the same problems, and the lens was held to the headlight assembly with a sticky glue.
To remove them, some guys were successful by warming the headlight assembly in the oven untill the glue softened up enough to be pulled apart.
Be careful if you try this, to much head and..oops I melted my headlight

Oct 13, 2010 | 2002 Mercury Cougar

2 Answers

I don't know how to take off the head light lens cover on my nissan maxiuma


Probably not a lens cover at all. It's just a 1 piece plastic headlight. It you are wanting to replace a bulb , they go in from the back . Open the hood and you should be able to see where the wires to the bulb go in the back of the headlight.

Nov 06, 2009 | 1997 Nissan Maxima

1 Answer

Headlight covers 2002 Impala


find a place that sells them, you can get aftermarket pretty reasonable, or junk yard. but no one sell the lens, it is sealed from the maker

May 26, 2009 | 2002 Chevrolet Impala

1 Answer

E300D Headlight Lens installation


First you have to remove the turn signal lamp. There is a plastic release tang that you push one way and pull the turn signal out. Next you have to remove the filler panel below the headlight assy to gain access to the bottom bolt. 2 screws hold the filler in place. There is also a black plastic filler panel that is pinned to the headlight assy remove it. There are 3 or 4  bolts that hold the headlamp assy in place 2 on top 1 on bottom actually it might be 2 on the bottom. (old age memory loss LOL) remove the bolts and remove the headlamp assy. The lens is held in by plastic clips just pry up gently on the locking clips and remove the lens. I hope this helps. It fairly easy and you should be able to DIY. Good luck and thanks for using FixYa!!

Aug 13, 2008 | 1995 Mercedes-Benz E-Class

Not finding what you are looking for?
1999 Jeep Grand Cherokee Logo

Related Topics:

69 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...