Question about 2007 Mercedes-Benz CLK550 Convertible

Open Question

I have an 07 MB CLK 550 Convt. and the rear headrests are stuck

Convt. top wont go down. Is there a reset?

Posted by on


3 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 41 Answers

SOURCE: how to reset service indicator on s 550 m.b., 2007

you need a scan tool snap on motis or deler master tech to reset service light

Posted on Mar 23, 2009

  • 1619 Answers

SOURCE: error message about trunk partitioner when trying

The microswitch in the trunk is probably failing. Its just a pin switch. Get a new one and install. Its meant to warn you if there is something in the way.

Posted on Apr 15, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Rear head rest stuck in up position any idea .?its the middle one

Some vehicles have a tiny push button or lever under the headrest where you can hardly see it (for release of the headrest.) If you look top and bottom all over the headrest you may find the release somewhere on yours.
God bless your efforts.

Oct 12, 2015 | Cars & Trucks

2 Answers

Location of fuel cutoff/reset switch clk 230 K

MB doesn't use a reset switch (AKA Inertia switch) for the fuel pump

May 15, 2014 | 1999 Mercedes-Benz CLK

1 Answer

Clk 230 convert roof

fulfilling celli blotion conter

Dec 18, 2013 | Cars & Trucks

1 Answer

Does not lower the roll bar

I had the same problem recently.

To the passenger side of each rear head rest is a small line/mark (about 1cm long). Take your allen key from the document wallet (or a piece of coat hanger about 30cm long with a 2cm length at right angles, ie an L shape).

Insert this straight down along the mark. Move it around until you get it into a small hole where you will feel a springy resistance.

While depressing the spring fully, get a friend to depress the headrest fully. Doing this on your own may be possible if the roof is down, but unlikely if it triggered with the roof up.

Release the spring and the headrest should be back in position.

Aug 09, 2011 | 2002 Mercedes-Benz CLK-Class

1 Answer

Roll over bars released. reset down what rearms them?

hi its just spring activated, just follow instructions below to reset the roll bar1. Raise rear headrest to its highest possition
2. With a screwdriver, remove the plastic cover that is located under the headrest between the roll-bar.
3. Reach down into the opening to locate the metal tab that has locked the spring loaded roll-bar into place.
4. Simultaniously push the tab in (towards the front of the car ) while pushing downward on the top of the exposed roll-bar to compress the springs. Push all the way down until the bar locks into place.
hope this helps please comment and rate thanks

Feb 03, 2011 | BMW 328 Cars & Trucks

1 Answer

Back head rest will not go back down

There should be a release button located on either side of the headrest on the seat itself and if you press it the headrest should go back in to the desired position

Jan 19, 2011 | 2005 Mercedes-Benz CLK

1 Answer

My roll bars (back seat head rests) are stuck in the UP position and I can't close the top while they are up. How do I get them down mechanically, the guide shows plenty of info for the top but nothing...

just push the roll bar button in the up position like you raising the roll bar. hold it for about ten seconds or til you hear a click sound. basically your just going to reengage the mechanism again since the roll bar got deployed while driving. If thats not the case then you might have a separate problem but I would start there.

Sep 28, 2010 | 2000 Mercedes-Benz CLK

2 Answers

Roll bar on clk 320 cabrio

I have a 2005 CLK 320. Roll bars deployed on a bump with the top up. Here's how to fix it: There is a reset port about 12 in below each headrest. The port is hard to find, but you can actually glimpse it with good light and/or a flashlight and some head/neck contortion. When facing forward the port is on the left side of each headrest. The port is oval in shape, about 4mm x 8mm, positioned about 10 mm forward of the support post and about 5mm to its left. Essentially, its an oval hole in black sheet metal. Mercedes mentions an allen key tool included with the car, but you can use a very long screwdriver or, preferably, a metal shishkabob barbecue skewer (by far the best) to reset the mechanism. Slide the tool (skewer, screw driver or allen key) straight down along the side of the headreast and then very carefully angle the tip forward and to the left (of car) to go into the port. Again, you can see this if you try. Push down on the spring under the port and hold down while you push down (Hard) on the headrest to its full reset position. Then remove the tool. Voila!

Before the reset, the top would not go down. After the reset, no problemo. Dennis

Jun 26, 2008 | 2000 Mercedes-Benz CLK

Not finding what you are looking for?
2007 Mercedes-Benz CLK550 Convertible Logo

Related Topics:

154 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers


Level 3 Expert

76682 Answers

Michael Contreras
Michael Contreras

Level 2 Expert

166 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides