Question about 2008 Nissan Sentra

1 Answer

Electric driver's window will not come up and all the other windows are working -- it has been slow to come up before this

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 267 Answers

That's unusual for a car that new. Can you get the door panel off. If so pull back the plastic seal and lightly tap on the motor for the window. I did this recently and the window has worked fine for months.
door panels can be tricky. Usually there is a screw around the inside door handly and 2 screws attaching the arm rest or wherever you grab to pull the door shut. sometimes there are screws elsewhere so look it over good and take your time and dont force it. once screws are out there are clips that snap in and out so it basically pulls off the car door. these are around the perimeter of the door panel. If this helps please reply and good luck

Posted on Apr 26, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

2004 Ford Expedition. Power windows not functioning properly. Can use driver side window from driver switch, and passenger rear window( slow response) Other windows will not respond via either switch. Can...

Looking at wiring diagrams to see what all is involved in the power window electrical circuit's an using a DMM- digital multi-meter to test the B+ ( voltage ) side of the circuit and the negative (ground ) side is how a professional automotive technician does it. All power an ground goes through the driver's door master switch . Free wiring diagrams here Enter vehicle info. year , make , model an engine size . Under system click on body & accessories ,then under subsystem click on power windows . Click the search button then the blue link.
2003 2006 Ford Expedition Window Switch Replacement
2004 2008 Ford Power Window Repair
Ford Expedition Power Window Regulator Replacement

Nov 25, 2017 | 2000 Ford Expedition

1 Answer

Electric window very slow to come up

pop off the door panel and watch...sounds like the guides may have slipped out of alignment. You can disconnect the motor from the arm and check its operation. Its a real pain to do but dissemble the whole works and lubricate. Did on my old Mazda BT50..a year or so ago and now it is slowing down again...just like me...
If you have a digital camera take a few pics before you take it apart as you may find you will have a few bits left

May 25, 2012 | 2003 GMC Sierra

1 Answer

Drivers electric window wont roll up it goes down real slow but wont go up past halfway.Its real slow going down and before this it would go slow and roll outside of track at top

Window regulator and motor assembly will need replaced. Common problem. You've seen other people with it at the drive thru ATM and pick up windows - getting out of there car to get items!! LOL! Seriously have an experienced mech. look into it. Having this thing not work will be a real pain especially if it dies during a rain storm. Good luck

Sep 09, 2010 | Honda Accord Cars & Trucks

1 Answer

Electric window on driver side door on 03

you need to change your power window motor,it's on it's last legg.

Aug 10, 2009 | 2003 Chevrolet Silverado Ss

1 Answer

Where to get electric window regulator for front driver side.The window goes down and up very slowly.

Try to spray some lubricant down both sides of the track the rubbergets old and dry slowing the process, armour all work prett good for softening the rubber.

Jul 21, 2009 | 1996 Honda Accord

1 Answer

Drivers window slow

First Lubricate the "Run Channel" (the thing the glass slides up in) with silicon spray. If that is not a complete fix, possibly the window regulator is binding up and may have to be replaced.

Check your local Honda Dealerships Websites for Service Specials or Coupons. Maybe just take it in for a oil change and see what the tell you. You can always say No, but might be better to get it done right while your there.

Good Luck.

May 04, 2009 | 2000 Honda CR-V

1 Answer

Driver window

it might be the motor cause i had to replace that on my back window cause it was really slow and didn't like to go up

Mar 19, 2009 | 1990 Cadillac Deville

1 Answer

Drivers side electric window does not work

Remove the door panel and disconnect the motor from the window, but leave it plugged in. See if the motor works. If it does you should grease the tracks on the window. If the motor does not work then you should replace the motor. The motor will probably get hot when you try working it.

Jan 23, 2009 | 2005 Nissan Xterra

1 Answer

Need to know where the ground for the power window circuit is.

If the Windows work good from the other doors, You need to replace the Switches on the Driver Side Door. Once they are worn like this they have a Hard time Operating to Full Capacity.

Jan 13, 2009 | 1991 Buick LeSabre

Not finding what you are looking for?
Cars & Trucks Logo

87 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts


Level 3 Expert

80407 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides