Question about 1995 Honda Accord

3 Answers

Why is the Abs light is on when it is nothing is wrong with the brakes?

Posted by on

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,206 Answers

The abs light is on because the automatic braking system has a problem yes it is still safe to drive but if you go into a wet condition and slam on the brakes you might go into a spin without the abs to keep you straight.usually its a wheel bearing sensor that's bad but can also be the control module best to go over to a auto zone or advance auto parts to get it checked for free.hope this helps you please vote if so.

Posted on Apr 26, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Honda Master
  • 11,122 Answers

Abs affect ur brakes by not letting them lock up or skid the modulator reads the sensors and when u hit the brakes hard the sensor notifies the modulator that a brake is locking and causes the brakes to pulse stopping the car and not letting it skid --when abs fails u still have braking but if u hit pedal hard car will skid --------as to ur problem check the sensors and wiring sometimes debris or something hits the wiring moving clip or damaging wire if looks good than have car scanned most auto stores such as auto zone / advanced auto check ur local area do this service for free the trouble code will pinpoint ur problem u can solve it

Posted on Apr 26, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 416 Answers

You may not feel anything wrong with the brakes but if ABS light is on something is wrong with ABS system have system checked to get a trouble code then you can find the problem with the ABS system

Posted on Apr 26, 2010

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Monster80
  • 460 Answers

SOURCE: 2001 chevy s10 blazer abs light stays .

The abs is a add on for the brakes that when the tires come into a skid or slid they wont lock up..Your brakes will still work great with the abs disabled but your brakes will lock up if you push on the brakes hard enough to stop.Mainly abs works in slippery conditions not letting the tires lock up and keep the car rolling instead of making it slide..But no effect of the brakes will happen..Just make sure your fluid is full and there are no leaks and if you want to get them check you can stop by your local Auto Zone and they will scan your car for free and tell you what sensor is bad..I hope this was helpful to you...Have a great night

Posted on Apr 03, 2009

  • 5 Answers

SOURCE: assorted dash board lights

If you smoke or eat in your vehical your smoke proble got in to it and messed up your hloe system. I suggest you getting a cd/dvd cleaner and try that. If it worked for me it should work for you to! Good Luck!

Posted on Sep 13, 2008

  • 2 Answers

SOURCE: abs and hand brake light

Check your master cylinder switch in the res. is not stuck down. When started is the light off until you go over 15 mph? If so check your abs relay. Good luck

Posted on Aug 03, 2008

GM Elec
  • 1000 Answers

SOURCE: abs and brake lights comes on

What you will need to do is have the system scanned for codes. Your local Auto Zone or Advanced Auto will scan the vehicle at no cost for you. Write the code numbers down and reply back.
When both lights come on, it is indicating one of the ABS sensing components is not operating properly. Your base brakes will be fine, however the ABS function will not work properly. No danger of base brakes not stopping the vehicle.
My guess at this point would be a wheel speed sensor faulty, but again, only a guess until you get the codes scanned.
Get the codes and let me know.
Regards,

Posted on Apr 13, 2009

  • 225 Answers

SOURCE: ABS light always on- any way to turn it off- i am

under the hood you will find a relay center ,the relay for your abs is bad.the way it effects the braking system is (now that the abs light is on )when you slam on the brakes your truck will skid to a stop,the abs system prevents the skidding,you will feel the brake pedal pulsate until stopped.

Posted on Jun 05, 2010

Testimonial: "we will check this and see if it helps thank u"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I turn off the warning lights on my car if there is nothing wrong but the ABS light stays on?


Go to another mechanic. The light is on because there is an ABS problem. It is usually sensors and the error code will tell you which one.

May 13, 2016 | Buick Lucerne Cars & Trucks

2 Answers

At various times all the warning lights go on/off


transmisson replacement is necessary.
thanks.

Sep 18, 2008 | 1999 Volvo S80

2 Answers

Why does my abs light staying on for I just replace new brakes yesterday and it feels like brakes are stiking when you trune two the right it makes a loud noise


ABS has nothing to do with the base brakes or , maybe you put them on wrong ! better take to a pro ! As long as the abs light is lit the abs portion is none functional ! You have a control module problem or the control motor for abs .

Apr 06, 2015 | Cars & Trucks

1 Answer

How do you disable tcs/ abs dash lights on a Hyundai xg300. short of replacing a sensor there is nothing wrong with the car. Just need a quick inspection fix.


cant by pass problem with abs brake see lights flashing there is a problem with abs brake system need fixing could have brake failure.

Sep 18, 2013 | 2001 Hyundai XG300

1 Answer

Abs control module on honda cr-v 2007


ok about the abs is possible that the abs cable that goes the the brake caliper is not good.about the brake light check brake fluid level filled up also check the sensor on the brake fluid container also check any malfuntioning wire connection corosive plugs.about the ac check compressor ad freon in order to kick on check the relay or fuses or the compressor is no good

Jul 13, 2012 | 2007 Honda CR-V

2 Answers

My abs light came on and it still remains on what could b wrong


You need to check your braking system immediately. If nothing appears to be wrong, take it to the dealership and have them turn off the abs light. Have them check the braking system while you are there.

Apr 18, 2011 | Honda Accord Cars & Trucks

2 Answers

The ABS light on my 2000 dodge caravan stays on. Of course, I took it in to get the brakes fixed today and the light was not on and they checked the sensors and they found nothing. But, after driving for...


The ABS light is an indication of your Anti-lock Brake system malfunction, not meaning your brake system will fail, the ABS keeps the brakes from locking up during bad weather (rain and snow) they can still stop the vehicle but you stand a chance of locking up as in older vehicles without this option...hope that helps!!

Jan 05, 2011 | Dodge Caravan Cars & Trucks

1 Answer

ABS and Brake Light on


Sounds like you have a bad sensor. No you can not hurt anything by driving with the light on, but you do want to try to keep your warning lights clear

Feb 08, 2009 | 1994 Chevrolet Corsica

1 Answer

Abs and hand brake light


Check your master cylinder switch in the res. is not stuck down. When started is the light off until you go over 15 mph? If so check your abs relay. Good luck

Jul 28, 2008 | 1998 Chevrolet Cavalier

Not finding what you are looking for?
1995 Honda Accord Logo

328 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...