Question about 2004 Toyota Highlander

3 Answers

Tire pressure light reset - 2004 Toyota Highlander

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

ZJLimited is incorrect. There is button is underneath the dash, slightly to the left of center. You cannot see it while sitting in the seat. The black button is clearly is labeled "Tire Pressure." Ensure the tire pressure is correct, turn the engine on, press the button, and the light goes off.

Posted on May 16, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 17,970 Answers

For this work need visit the dealer for reset. Just they have the tool for this work.

Good luck.

Posted on Apr 26, 2010

  • ZJ Limited
    ZJ Limited Jun 18, 2010

    Also, I suggest check the Toyota Highlander Owners Manual 2004

  • ZJ Limited
    ZJ Limited Jun 18, 2010

    How to do a complete recalibrate:



    1. Turn engine on.

    2. Wait for warning lights to initialize and go out (except for tire
    pressure light).

    3. Hold reset button down 'till pressure light goes off.

    4. Turn engine off.

    5. Turn engine on.

    6 Wait for warning lights to initialize and go out.

    7. Hold reset button down 'till light flashes 3 times and goes out.

    8. Turn engine off.

    TY for using Fixya.


×

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

There is another bottom labeled O/D below the main bottom of the gear lever used to change the gear from P to R to D and so on. what is this bottom meant for?

Posted on Jun 18, 2010

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: how to reset tire pressure light 2006 toyota tundra

if this is a toyota 4runner, to reset your tire pressure light, all you need to do is drive your car for up to 10 minutes. On a 4runner the computer takes a reading from your TPMS every minute

*if this is not for a 4runner, there may be a different procedure to reset the sensors, but try this first

Posted on Jan 28, 2009

  • 1 Answer

SOURCE: Tire pressure light

On the lower left hand side of the dash, near the Traction control button, is a small push button. Just press and hold until the Tire Pressure light goes out. Of course, make sure you're pressure is ok, otherwise, it will just come back on in a couple minutes.

Posted on Feb 27, 2009

dsacco86
  • 1077 Answers

SOURCE: low tire pressure light won't stay off after proper reset.

Some newer Toyota vehicles have a sensor in the spare tire. Tires loose air over time naturally. I would check out the spare.
When did this TPS light start coming on?
Have you had new tires put on, or had a flat repair done before the light?

Posted on Apr 28, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Reset tire pressure light on dash 2014 ford focus


use this link.
http://enginepartsdiagram.com/2007-2016-ford-focus-tire-pressure-tpms-sensor-light-reset/

Dec 11, 2016 | Ford Cars & Trucks

1 Answer

How do I reset my tire pressure light when tires are fine


My Lesabre has buttons on the left side of the dash. The one called Gage Info has a number of things like oil pressure check tire pressure heat Battery. Push this button till it says check tire pressure To reset your light push the reset button and hold for fifteen or twenty second and the light on the dash should go out and it will show tire pressure ok on the gage. Before you reset check all four tires for air as one tire could be down 8 or 10 lbs and the light will come back on. they all have to be the same pressure.
When you change your oil you should reset the oil section as well and hold reset the same as above. The oil section tells you how much oil you use over an amount of time.

Apr 01, 2016 | 2004 Buick LeSabre

1 Answer

Tyre Pressure and ABS


By operating the tire pressure warning system reset switch, tire pressure warning system ECU can be set to issue a warning at an inflation pressure that corresponds with the type of tires.
Operate the tire pressure warning system reset switch only after the inflation pressures of all 4 tires have been adjusted on the vehicle.
To initialize the system, press and hold the tire pressure warning system reset switch for 3 seconds or longer with the power switch turned IG-ON. When starting the initialization, the tire pressure warning light blinks 3 times at 0.5 Hz.
During the initialization, the tire pressure warning system valve & transmitter measures the inflation
pressure of the tires, and registers the signals that are transmitted into the ECU at a frequency of 1 per
minute. The initialization process is completed when the signals from the tires have been received.
Once the tire pressure warning system reset switch has been pressed, do not turn the Ignition switch OFF for a few minutes.

Mar 05, 2014 | 2002 Toyota Corolla

1 Answer

I have a buick lesabre 2000 nd my tire went flat the check tire pressure light came out.. So i went to buy a new tire nd change it. But the light is still there.. I tried to reset it how it says on the...


SWITCH IGNITION ON, REPEATEDLY PRESS GAGE INFO BUTTON UNTIL THE MESSAGE TIRE PRESSURE IS DISPLAYED IN THE MULTIFUNCTION DISPLAY, PRESS AND HOLD RESET BUTTON UNTIL THE MESSAGE TIRE PRESSURE RESET IS IN THE DISPLAYED IN THE MULTIFUNCTION DISPLAY,RELEASE THE RESET BUTTON THE MESSAGE TIRE PRESSURE NORMAL WILL BE DISPLAYED IN THE MULTIFUNCTION DISPLAY, AFTER RESETTING TPMS THE VECHICLE REQUIRE UP TO 30 MINUTES OF STRAIGHT LINE SMOOTH ROAD DRIVING IN EACH OF THE 3 SPEED RANGES 15 - 40 MPH - 40 - 70 MPH - 70 - 90 MPH. MAKE SURE ALL 4 TIRES HAS THE RIGHT AIR PRESSURE BEFORE RESETTING TIRE PRESSURE LIGHT.OR LIGHT WILL NOT TURN OFF IF ONE TIRE IS LOW.

Jul 16, 2011 | 2000 Buick LeSabre

1 Answer

Tire pressure light comes on


You shouldn't be setting the tire pressure to the max inflation pressure listed on the sidewall, that will likely result in uneven tire wear with the center of the tire wearing out prematurely. You should set the pressures according to the listings in the door jam. Most likely 32-34psi. Also, have you checked the spare tire? Some systems monitor and will illuminate the TPMS light if the spare tire pressure isn't within an acceptable range. The spare is often overlooked when checking tire pressures because of a TPMS indicator.

May 11, 2010 | 2005 Scion tC

1 Answer

Reset the Tire Pressure Warning light.


well it depends, if you have just reset the tire pressures, the light should go off by itself, if it doesn't then you have a bad tire pressure sensor. If you have replaced the sensor, it must be programmed into the WCM by the dealership.

Nov 21, 2009 | Dodge Durango Cars & Trucks

1 Answer

Changed right front tire now reads zero on dash light is on


Your tire pressure monitor needs to be reset whenever you change or rotate your tires...

1. check and make sure that your tires are inflated to the correct pressure

2. turn the ignition switch to the ON position. If the low tire pressure warning light comes on, push and hold the tire pressure warning reset switch (think the switch is in the glovebox, but not sure) until the warning light turns off and then release the switch.

3. now press and hold the tire pressure warning reset switch until the low tire pressure warning light blinks three times.

4. initialization is *not* completed until driving at the vehicle speed of 19 mph or over for more than one hour. the tire pressure monitoring starts when initialization is completed.

Aug 24, 2009 | 2008 Chevrolet Tahoe

1 Answer

How do you reset low tire light


1. check and make sure that your tires are inflated to the correct pressure

2. turn the ignition switch to the ON position. If the low tire pressure warning light comes on, push and hold the tire pressure warning reset switch (think the switch is in the glovebox, but not sure) until the warning light turns off and then release the switch.

3. now press and hold the tire pressure warning reset switch until the low tire pressure warning light blinks three times.

4. initialization is *not* completed until driving at the vehicle speed of 19 mph or over for more than one hour. the tire pressure monitoring starts when initialization is completed.

Aug 20, 2009 | 2005 Chrysler PT Cruiser

2 Answers

Low tire light came on - tire pressure ok


Because of changing outside temps this happens, just hold reset button on left side of dash until it reads tire pressure 100% again, just make sure your pressure is right before you do it. this is the same for oil changes and the like.

Apr 26, 2009 | 2001 Buick LeSabre

3 Answers

Tire Pressure indicator


hold reset button for about 10 seconds. your tire pressure would reset

Feb 20, 2009 | 2003 Pontiac Bonneville

Not finding what you are looking for?
2004 Toyota Highlander Logo

361 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...