Question about Ford E-250

1 Answer

On a 2003 Ford E250 Econoline van with electric door locks...is it possible to disconnect the rear and side cargo doors from being electrically controlled so that only a key can open them? How would I do that?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Expert
  • 4,070 Answers

Hi! Yes its possible if manual you want it to be. Try this, If the cargo doors have separate fuse from the fuse box then just remove the fuse and it would work manually. If you wont find the door fuse then you should work on the door manually. Open the cargo door trimming and you will find a motor inside the door. The motor has a connector that leads to the lock. Remove the connector to cut the power supply to the motor and you'll be on manual now. Hope this helps and have a good one!

Posted on Apr 27, 2010

  • dj_relly999
    dj_relly999 Apr 27, 2010

    Hi! Yes its possible if manual you want it to be. Try this, If the cargo doors have separate fuse from the fuse box then just remove the fuse and it would work manually. If you wont find the door fuse then you should work on the door manually. Open the cargo door trimming and you will find a motor inside the door. The motor has a connector that leads to the lock. Remove the connector to cut the power supply to the motor and you'll be on manual now. Hope this helps and have a good one!

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

DOOR LOCK ON DRIVERS SIDE WONT WORK


key is manual lock and electric assisted unlock . charge the battery with red screw on fuse panel Use key to unlock turning to rear.
Place key in ignition then turn on and off 8 times leaving it in on position until it beeps approx 5 sec then press any button on the key and turn ignition off.

Mar 05, 2013 | 2012 Ford Transit Connect Cargo Van XL...

1 Answer

On a 1998 Ford Econoline E-150, it has electric door locks. The side door and the back door lock does not work. Everything else in the van works. Where do I start looking besides fuse #4 and #5.


it could be the lock motor or it could be the wiring that came lose or wire damage ! need to now if it works from the doors that dont work or from the driver door it my be locked out at the diver door or it can be a wire lose or switch on driver door !

Apr 05, 2011 | 1998 Ford Econoline

1 Answer

How do I disconnect the power to the power door locks ONLY to the CARGO side and rear doors so that only a key can be used to open them?


You will have to pull the door panels and unplug the lock actuators in these doors to do what you are trying to do.

Apr 27, 2010 | 1997 Ford Econoline

1 Answer

04 Econoline e250\ broken side door lock


The only place that is going to have a part is the dealer. They have schematics for every part of the vehicle. Your going to have to go there and get your answers. Getting the part is the first step

Jan 31, 2010 | Ford E-250 Cars & Trucks

1 Answer

How do ypu remove heater box cover on a 1998 e250 Ford? This is what I am trying to do: The Econoline vans are famous for breaking the blend air door inside the heater case. The electric servo will still...


Save your self the time of removing the dash. Just remove the heater core and temp control door assembly. Install just the door assembly ,the rest of the case is the same as the old one.

Oct 03, 2009 | 2002 Ford E250

1 Answer

Side mirror of 2005 ford explorer


Exterior Mirror Removal and Installation
All vehicles
  1. NOTE: Left side exterior mirror shown, right side similar.
    Remove the interior door trim panel. For additional information, refer to Section 501-05 .
Front Door Trim Panel Removal and Installation
  1. Disconnect the battery ground cable. For additional information, refer to Section 414-01 .
  1. Remove the inside door handle bezel from the trim panel.
  1. Remove the window switch assembly.
  1. Disconnect the window switch and power door lock electrical connectors.
  1. Remove the upper trim panel screw at the window switch opening.
5c94a3e.gif
  1. Remove the lower trim panel screws.
2de1016.gif
  1. s2n~us~en~file=ani_caut.gif~gen~ref.gif CAUTION: To avoid damage to the door trim panel, do not pull directly outward for this step.
    Lift the door trim panel by pulling directly upward on the armrest to disengage the panel clips.
  1. Disconnect the power mirror electrical connector.
  1. Remove the trim panel.
  1. Remove the weather shield.
Vehicles with power, heated or approach lamp equipped exterior mirrors
  1. Disconnect the electrical connector.
All vehicles
  1. Remove the bolts.
a2275a5.gif
  1. Remove the exterior rear view mirror (17682).

Feb 23, 2009 | 2003 Ford Explorer

1 Answer

1999 Econoline E150 Van mirror replacement


Remove the door handle bezel.Remove the power window/door lock switch bezel.Remove the rearview mirror fastener trim cover.Remove the 4 door trim panel retaining screws.One that was behind the mirror trim cover,behind the switch panel,behind the door handle bezel,and one at the bottom corner.Lift the door trim panel up from the door to disengage the trim panel clips.Remove the front radio speaker. Disconnect the power mirror wiring connector.Remove the 3 bolts to the mirror.

Feb 08, 2009 | Ford E-150 Cars & Trucks

1 Answer

98 dodge cargo locks


your lock acuteuator is stuck replace it and you should be fine

May 15, 2008 | 1983 Dodge Cargo

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

344 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...