Question about Chevrolet Silverado 1500

2 Answers

2007 silverado new body style all parts replaced including bags and belts sensors and module .. how can I reset the light now ? using a solus scan tool by snap on wont do it ..

Posted by on

  • Jerry Koski
    Jerry Koski Apr 26, 2010

    No NO the air bag light is on .. We replaced all sensors and module and bags and belts .. the light is still on how can we get it off ? we used the snap on solus which does not work ...

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 819 Answers

A solus definitely should be able to clear your airbag light. are you going into the airbag module in the starting screen? where it asks you engine, abs, bcm, airbag, IPC, etc... if the light will not go out, the problem for the logged code still exists. what is the code that is appearing?

Posted on Apr 27, 2010

  • Geoff Walton Apr 27, 2010

    ok, but the light is on because their is a trouble code logged, you need to use the solus to retrieve the code. the light cannot be reset until the problem is fixed. what is the code?

×

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,917 Answers

Hi,
To reset the CHANGE ENGINE OIL lihght, turn the ignition key to run with the engine off. Fully press and release the accelerator pedal three times within five seconds. If the CHANGE ENGINE OIL message flashes for five seconds, the system is reset.

OR
Disconnect the battery for a few seconds. If nothing else you can take it to oriellys or autozone n have them put their scanner on it and reset the codes.
Disconnect the battery. But you should have it checked. There's a code stored in memory that is needed to fix the cause of the check engine light being on.
Please see the following steps...
Insert your key and turn the ignition to position "C" (Run/On) without starting the engine.Press the second button from the top on your information center (next to the steering column, car symbol) until "Oil Life" displays on your odometer cluster.
Press and hold the "Reset" button on your information center (check mark symbol) until the "Oil Life" display changes to 100 percent.
Turn your ignition to position "A" (Lock/Off).
Let us know if you want something else please accept the solution.
Thank You for contacting fixya.com

Posted on Apr 26, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the seat senor that is connected to the air bag light located on a dodge caravan 2007 3.3 liter ?


its not a seat sensor, most likely you got mosture in the body control module

Oct 09, 2015 | 2007 Dodge Caravan

1 Answer

Smog Filed due to error P0121 Throttle/Pedal Position Sensor/Switch A Circuit range/performance.


Replacing TPS will reset the light but will stay in memory until the computer is reset. For help to change throttle body sensor check out you tube :How To Install Replace Throttle Position Sensor Chevy Silverado GMC Sierra.

Mar 23, 2015 | 2007 Chevrolet Silverado 1500 2WD

1 Answer

1997 honda civic 1.6L DX SRS Air Bag light stuck on after drove throo heavy rain!


A code reader may not access the body computer, but a professional scanner should. You may be able to research the air bag system online and find a way to make the light flash the codes.
I would guess after reading your description one of the front crash sensors got water in the connector and the sensor has failed.

Sep 27, 2012 | Honda Cars & Trucks

1 Answer

Reset airbag module on 2002silveado


normally if a car has been in a bump and the air bags deployd a new air bag moduel is needed thats why it cannot be reset

Sep 26, 2012 | 2002 Chevrolet Silverado 2500HD

3 Answers

Air bag light is on. Ireplaced the bags belts and module?


Have you scanned the air bag computer for codes? There are many parts to the air bag system, simply replacing parts without knowing why the light is on would be extremely costly.

Aug 24, 2010 | 2000 Hyundai Sonata

1 Answer

2007 Tundra. Had accident that pushed in drivers light and deployed airbags. Repaced airbags and airbag light is still on. How do I reset.


With scan tool,but light should reset when truck is started, it runs quick test after starting ,theres a problem in the air bag system,did you replace crash sensors and module tested okay.

Jun 17, 2010 | Cars & Trucks

2 Answers

I had a fender bender that pushed in front bumper and blew both air bags and cruise control. i have had bumper/frame repaired and i need to know where/how many sensore need to be replaced when i replace...


you should only have to place the front crash sensor and both air bags and you may have to replace the clock spring behind the steering wheel it usually breaks after an impact i would recommend you have a qualified technician do this work

Jan 18, 2010 | 2001 Ford Escape

1 Answer

How to reset airbags in a 2007 tahoe


u have to replace all dammage components for the air bag system first including the air bag module
if u install the air bag it would not blow out like that
the system is in default that why the warning light is on
u would have to get the vehicle scan to see the reason why the light is on or to reset it ( by dealer )

Oct 27, 2009 | 2007 Chevrolet Tahoe

1 Answer

2001 corolla air bag replacement ,


If you are replacing the air bags, you should replace the front left and right crash sensors, the spiral cable under the steering wheel, AND the center air bag sensor, which is in front of the console. If your car has seat-belt pretensioners and force limiters, you may have to replace them also. You will know this if the seat belts are "locked up". If you do not replace all of the parts, you may get a air-bag code, and the air bags may not deploy next time.

Feb 09, 2009 | 2001 Toyota Corolla

1 Answer

Head light assy


new body style or old?
old body you will see a pin on top of lamp assembly slide pin out and light will come out.
new body remove two 10mm bolts and lamp will come out

Oct 21, 2008 | 2007 Chevrolet Silverado 1500 2WD

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...