Question about 2004 Honda Accord
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 2006 Honda Accord Dome Light
lok real carefull at the lense there will bee two little slots in the lense between the cover and the trim you can use a pockett screw driver or a butter knife and pry open the lense away from the trim it well be a little stuborn but dont worry you wont crack the lense
Posted on Nov 30, 2008
SOURCE: Replace dome light bulb
insert a flay eyeglass scrwdriver in between the plastic lens and base, pry gently , the lens will pop out... u should see the small sections where to insert the screwdriver to pry off the lens
Posted on Apr 05, 2009
These are directions from Wiki plus my own recent experience. Open the trunk and look in the left or right corner closest to the rear of the car. You will see a 4x4 3/4 (approximate) plastic cover, pull firmly to remove the plastic piece (if covered) from the backside of the taillight. Pay attention to how it comes out too because you will have to match up the ends to put the piece back in correctly. My breaklight was the top lightbulb but you can locate the burned out bulb by pressing your breaklights (I used a stick to wedge the pedal). When you find the bulb that is burned out, twist the bulb by grabbing it at the plastic end (I had a little tab on mine to push in before I turned the bulb) and turn it counter-clockwise then pull it straight out of the plastic housing and replace it with a brand new light bulb.
Hope it goes as smoothly for you as it did for me!!
Posted on Apr 11, 2009
This is a real pain, took me forever to find mine... there is a little TINY slot that you can fit a VERY small flat head screwdriver in to pop it off.
Dont worry, the plastic is durable, just try to use a precision screwdriver if you have one and basically pry it open. it really will just Pop off once you get in there
Posted on Jun 28, 2009
SOURCE: Honda Accord Map Light bulb
the cover is removed straight down, slowly working it with a thin tool or butter knife. WD40 to front and rear edge (there's nothing medial or lateral). The cover has 2 Y clips on each side, one about half way, and one that clips straight off of the hinge post. There are no "tabs". It will eventually unclip straight down. Then can replace with a DE3175 LED bulb (V-LEDs.com)
Posted on Oct 29, 2009
Tips for a great answer:
Nov 02, 2017 | Honda Cars & Trucks
Oct 13, 2014 | 2004 Honda Accord
Jan 20, 2013 | Honda Accord Cars & Trucks
Apr 12, 2010 | 2004 Honda Accord
Apr 11, 2010 | 2004 Honda Accord
Jun 28, 2009 | 2005 Honda Accord
Nov 18, 2008 | 2006 Honda Accord
461 people viewed this question
Usually answered in minutes!