Question about 1999 Nissan Maxima

Open Question

My 1999 Nissan Maxima just failed inspection woth

My 1999 Nissan Maxima just failed inspection with the following error codes;
P0325
P0450
P1444
P1446
I may try to do this work myself. Biggest thing is to get that Engine light to go off and pass inspection with the least amount of cost.

Help!!

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 184 Answers

SOURCE: I need to troubleshoot dtc p0325 & p1320 on a 1997 Nissan Maxima GXE?

Hi,

The two codes seem to be related. The P0325 description is knock sensor circuit malfunction and the P1320 is ignition signal - circuit malfunction.

I'll summarize and then give links on more detailed articles I found. Basically the P0325 refers to the knock sensor and associated wiring. The P1320 refers to the ignition coil and wiring. Check the sensor, coil, and associated wiring.

I found some great articles:
P0325 - http://www.obd-codes.com/p0325
P1320 - http://autorepair.about.com/library/a/1i/bl039i.htm

Good luck!

Posted on Dec 12, 2008

dsacco86
  • 1077 Answers

SOURCE: trouble code P0325 and P1444

Nissan code:
P1444 Canister Purge Volume Control Solenoid Valve

Generic OBD II code:
DTC Codes - P0300-P0399 – Ignition System or Misfire
P0325 Knock Sensor 1 Circuit Malfunction (Bank 1 or Single Sensor)

I hopes this helps you.
Replace or fix these two items should do the trick.
It's hard to diagnose a car over a computer.

Posted on Mar 23, 2009

  • 115 Answers

SOURCE: nissan quest 1999 engine light codes P0325 &

P0325 is for the knock sensor.

P1105 is for the manifold absolute pressure sensor (MAP).

In either case diagnostic tests need to be performed to rule out faulty sensors or if something else is causing the sensors to give the computer inaccurate information.

Posted on Sep 02, 2009

SOURCE: 1998 nissan maxima trouble code p0134

The code points to a 02 sensor no responce. It may be dead. Testing can confirm this. If the car has a broken wire or an 02 sensor fuse this also could be the issue.

Posted on Nov 10, 2009

  • 1 Answer

SOURCE: 1999 nissan maxima misfires at stop sign. I have

P0325 is a knock sensor. the knock sensor will not set the ses ligth

Posted on Sep 15, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Nissan maxima code P0325,P0100 and P0110


Well, sometimes you get lucky replacing parts, but usually its something other than the component in question.
The trouble codes are a guide as to what to test, not what to replace.
Code 325 is for the knock sensor which could be a phantom code.
Code 100 is for a bad signal from the MAF sensor which may or may not be caused by a bad sensor. It could be a vac leak too.
Code 110 is for a bad signal from the intake air temp sensor. The signal tells the computer what the temp of incoming air is to help the computer decide how rich the fuel mixture should be.
You need to get the testing procedures for each code and follow them. I would skip code 325 and start with code 110.
The fuel pump was probably a waste of money unless you checked fuel pressure before you replaced it and it was low. Same thing with the O2 sensors. Very rare if both sensors fail at the same time.

Feb 28, 2013 | 1996 Nissan Maxima

1 Answer

P0325 and p1320 coming up, new coils, new knock sensor, does not misfire at alll anymore, drives fine need to get check engine light off to pass inspection


After your car has performed enough successful warm-up and run cycles, the codes will clear and your check engine indicator will shut off.

Alternatively, a car parts store can clear them for you with an OBDII compliant scanner.

Aug 25, 2011 | 1999 Nissan Maxima

2 Answers

1998 Nissan Pathfinder - Code P1444


Clean your mass air flow sensor with electrical contact cleaner. It's located between your air box and intake when it gets dirty it tricks your car into thinking it's getting less air than it is

Apr 08, 2010 | 1998 Nissan Pathfinder

3 Answers

I failed the emisson's test. I have a 97 Nissan


P0136 indicates a bad O2 sensor. This reports poor emission performance back to the car's PCM (computer)
P0325 indicates a bad "Knock" sensor which would adversely effect drivability as far as performance is concerned. Only way to fix these 2 problems is replacement of the 2 components.

Nov 03, 2009 | 1997 Nissan Maxima

1 Answer

Code p0446 1997 nissan maxima


how did you fix your p0446 code?

Apr 21, 2009 | 1997 Nissan Maxima

1 Answer

Trouble code P0325 and P1444


Nissan code:
P1444 Canister Purge Volume Control Solenoid Valve

Generic OBD II code:
DTC Codes - P0300-P0399 – Ignition System or Misfire
P0325 Knock Sensor 1 Circuit Malfunction (Bank 1 or Single Sensor)

I hopes this helps you.
Replace or fix these two items should do the trick.
It's hard to diagnose a car over a computer.

Mar 23, 2009 | 1998 Nissan Altima

1 Answer

I need to troubleshoot dtc p0325 & p1320 on a 1997 Nissan Maxima GXE?


Hi,

The two codes seem to be related. The P0325 description is knock sensor circuit malfunction and the P1320 is ignition signal - circuit malfunction.

I'll summarize and then give links on more detailed articles I found. Basically the P0325 refers to the knock sensor and associated wiring. The P1320 refers to the ignition coil and wiring. Check the sensor, coil, and associated wiring.

I found some great articles:
P0325 - http://www.obd-codes.com/p0325
P1320 - http://autorepair.about.com/library/a/1i/bl039i.htm

Good luck!

Oct 19, 2008 | 1997 Nissan Maxima

Not finding what you are looking for?
1999 Nissan Maxima Logo

Related Topics:

192 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...