Question about 1999 Chevrolet S-10 Pickup

1 Answer

Which fuse controls the backup lights? - 1999 Chevrolet S-10 Pickup

Posted by on

1 Answer

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is backup light switch on 01 impala


Backup Lamps
The B/U LAMP fuse in the RH I/P fuse block supplies battery positive voltage to the switch terminal of the backup lamps relay. The DIC/RKE fuse supplies battery positive voltage to the backup lamps relay coil terminal. When you place the gear selector lever in the REVERSE position, the powertrain control module (PCM) sends a class 2 message to the body control module (BCM). When these conditions occur, the BCM energizes the reverse lamp relay control circuit, closing the switch contacts, the current flows from the reverse lamp relay switch to the backup lamps. The backup lamps are grounded at G302.

There is alot involved in turn on the back up lights .
DTC B2552
Circuit Description
The body control module (BCM) controls the backup lamp relay. The BCM grounds the backup lamp relay control circuit which energizes the backup lamp relay.

2
Install a scan tool.
Turn ON the ignition, with the engine OFF.
With a scan tool, command the backup lamp relay ON and OFF.
Does the backup lamp relay turn ON and OFF with each command?
YES - Go to Diagnostic Aids
NO - Go to Step 3

DTC B2553
The body control module (BCM) controls the backup lamp relay. The BCM grounds the backup lamps relay control circuit which energizes the backup lamp relay.
Turn the ignition ON.
Shift the gear selector lever to the REVERSE position.
Do the backup lamps turn ON?
YES - Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems
NO - Go to Step 3
3
Remove the backup lamps relay.
Connect a test lamp between the battery positive supply voltage circuit of the switched side of the backup lamp relay and ground.
Does the test lamp illuminate?
Before replacing parts you may not need , take your vehicle to a qualified repair shop .

Aug 16, 2016 | 2001 Chevrolet Impala

1 Answer

Reverse lights stay on in drive 2004 buick rendezvous cxl


Backup Lamps
The TURN SIG fuse in the console fuse block supplies battery positive voltage to park neutral position switch. When the gear selector lever is in the REVERSE position, power is supplied to both of the backup lamps. The backup lamps are grounded at G401 and G402.
Do you know what DTC'S - diagnostic trouble codes are ?
DTC B2552
The body control module (BCM) controls the backup lamp relay. The BCM grounds the backup lamp relay control circuit energizing the backup lamp relay. The BCM connects directly to the center console fuse block with no external wiring between them.
DTC B2553
The body control module (BCM) controls the backup lamp relay. The BCM grounds the backup lamps relay control circuit energizing the backup lamp relay. The BCM connects directly to the center console fuse block with no external wiring between them.
Backup Lamps Always On
  1. Turn ON the ignition.
  2. Shift the gear selector lever to the REVERSE position and then to the PARK position.
Do the backup lamps turn on in REVERSE and turn off in PARK?
Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems
Go to Step 3

3

Remove the backup lamps relay.
Do the backup lamps turn OFF?
Go to Step 5
Go to Step 4

4

Repair a short in the backup lamps relay switched battery positive voltage supply circuit. Refer to Circuit Testing and Wiring Repairs in Wiring Systems.
Did you complete the repair?
Check the back-up lamps relay #45 in the center console fuse/relay box .
Fuse Block - Center Console
Inside of console, behind the right console access panel

Check

Jun 11, 2016 | 2004 Buick Rendezvous

1 Answer

2003 Yukon XL Denali Trailer Light Problems


Lighting control module ? ?????? Hazard / flasher module ! Now ( there''s not even an electrical signal where the fuse plugs into the interior fuse panel.) What FUSE ??????

Stop Lamps
The STOP LP 25 A fuse in the underhood fuse block supplies battery positive voltage to the normally open stop lamp switch. When the driver presses the brake pedal, the switch contacts close and battery positive voltage is supplied to both the STOP 15 A fuse and the CHMSL 10 A fuse in the I/P fuse block, and to the turn signal/hazard module. The turn signal/hazard module then supplies voltage to both of the trailer rear turn/stop lamp supply voltage circuits. The voltage from the CHMSL 10 A fuse is to the center high mounted stop lamp (CHMSL) and the trailer jumper harness. The voltage from the STOP 15 A fuse is to the stop lamps, throttle actuator control (TAC) module, and the cruise control.
Backup Lamps
The backup lamp request signal is sent from the powertrain control module (PCM) to the body control module (BCM) on the Class 2 message system. This signal is based on the park neutral position (PNP) switch signal. The BCM supplies voltage on the backup lamp supply voltage circuit to the backup lamps and to the automatic day/night mirror. Voltage for the courtesy lamp supply voltage circuit and backup lamp supply voltage circuit is from the TBC B fuse in the instrument panel fuse block directly through the BCM to these circuits. A short to ground on either of these circuits will open the fuse. The backup lamps are grounded at G401.
For trailer wiring, a separate backup lamp circuit is connected through the underhood fuse block from the TRLR B/U 10 A fuse to the trailer wiring harness.
Turn Signal/Hazard Lamps
The IGN E 10 A fuse in the underhood fuse block supplies battery positive voltage to the turn signal/hazard switch assembly. The FLASH 25 A fuse in the I/P fuse block supplies battery positive voltage to the turn signal/flasher module and ground is supplied at G200. When the turn signal switch is placed in either the left or right position, a voltage signal is completed from the turn signal switch to the turn sign/flasher module. When the hazard flasher switch is activated, a ground signal is completed from the turn signal/hazard switch to the turn sign/flasher module. The turn sign/flasher module then sends an on-off voltage signal through the LT TRLR, RT TRLR, LT TURN or RT TURN 10 A fuses in the I/P fuse block to the appropriate turn signal or to all 4 fuses for hazard operation. The instrument panel cluster (IPC) indicators receive voltage from the LT TURN and RT TURN fuses as well as the DDM/PDM for the mirror turn signals. The DDM/PDM has no function or control of the mirror turn signals other that a pass through connection for the circuits. The audio chime is also activated when the turn signals are on. When the hazard switch is pressed, all turn signal lamps will flash including both IPC turn indicators. The front turn signals are grounded at G100. The rear turn signals are grounded at G401. The Mirror turn signals are grounded by the DDM/PDM.

Do you know how to do automotive electrical circuit testing with a test light or volt meter ? How to read an use a wiring diagram to pin point testing points . ( connectors , fuse locations etc... ) How to use a power flow chart ? Here is a site for just such info .

http://www.bbbind.com/free_tsb.html Enter vehicle info . year , make , model an engine size . System click lighting , subsystem exterior lighting . Second diagram shows trailer wiring .
Electric Testing Techniques You Need to Know

Mastering Voltage Drop Testing with Pete Meier and Jerry Truglia

CHEVROLET 2007 SILVERADO TRAILER LIGHT TROUBLESHOOTING


Apr 07, 2017 | 2003 GMC Yukon Denali

1 Answer

Check engine light is on code is p0705 coolant light comes on


Was it the "Backup Fuse 10Amp" under the hood? I'm having the same problem. Check engine light and low coolant light same time. Also found the backup lights quit working and so did the cruise control. I found the wire harness for the Neutral Safety Switch PRND1L had chaffed on the switch case and caused the fuse to blow. I repaired and insulated the wires & replaced the fuse. All is well.

Mar 22, 2012 | 2005 Saturn VUE

1 Answer

What fuse is speed control


First, Please review these articles:

Where's The Fuse?

What Else Could Be Wrong?

Then to answer the question you asked...

There are actually three fuses involved in your cruise control system.

> The first is the "Cruise Control, EAT ECU" fuse. it is Fuse #4 in the Underdash Fuse And Relay Box. it is a 7.5 Amp fuse. This fuse also powers the gauge assembly, the alternator control circuit, the Radiator Fan Control Module, the Intake Air Bypass Control Solenoid Valve, The EGR Control Solenoid Valve, The EVAP Canister Bypass Solenoid Valve, the EVAP Canister Vent Control Solenoid and the Heated Oxygen Sensor Heater circuits. If this fuse is blown, the engine will not idle, The alternator will not charge the battery and the transmission will not shift properly. In general, a whole bunch of stuff will not be working.

> Next is the "Backup, Metering Lights, Turn Signals" fuse. It is Fuse #1 in the Underdash Fuse And Relay Box. It is a 10 Amp fuse. As you can tell by the description, your backup lights, dash warning lights and turn signals will also not be working if this fuse is blown.

> Last there is the "Stop Light, Horn" fuse. It is Fuse #30 in the Underhood Fuse And Relay Box located at the right rear of the engine compartment. It is a 20 Amp fuse. As you might guess, your horn and stop lamps will also not be working if this fuse is blown.

Jun 04, 2011 | 1995 Honda Accord

1 Answer

Can't find backup light fuse for 2001 F350 ford pickup. It's not in the fuse panel box.


I suggest check in the Passenger Compartment Fuse Panel the position 28, 15AMP for Brake Shift Interlock, DRL Relay Coil, Speed Control Module, Backup Lamps, Trailer Tow Backup Lamp Relay Coil, Electronic Shift On The Fly Hub Lock Solenoid, Vacuum Pump Motor...

zjlimited_957.jpg

The fuse panel is located below and to the left of the steering wheel by the brake pedal. Remove the panel cover to access the fuses.

Hope this helps (remember to rate this answer).

Mar 31, 2011 | Ford F-350 Cars & Trucks

1 Answer

My backup lights will not come on when i put my jeep in reverse


it proably is your neutrual safety switch. it controls your backup lights. the same thing happened to mine. then mine would not start anymore after a while. It can be removed and cleaned.

Jun 05, 2009 | 1996 Jeep Cherokee

1 Answer

Backup lights not working ?


It would help to know what kind of vehicle you are talking about.

Feb 15, 2009 | 2000 Toyota Camry

1 Answer

2005 Ford Focus - Backup Lights Do Not Work - Fuse & Bulbs Good


the sensor is on the shifter and their should be a fuse associated with it. Look at your owners manual for the location of the fuse. If there is a fuse it should control many devices and all of them would not work if it is blown.

Jan 22, 2009 | 1996 Ford Taurus

Not finding what you are looking for?
1999 Chevrolet S-10 Pickup Logo

Related Topics:

69 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...