Question about 2005 BMW X5

1 Answer

How can i remove door handle of bmw X-3

How can i remove door handle of bmw x3

Posted by on

  • JOHN CQARR Feb 20, 2013

    the trim paint scratches off on this model and removal of horn pad is needed to get tim off for refinish.One post said to use 2 long nO.10 torques in deep holes at rear of stee4ring wheel is this correct. Thank you

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 71 Answers

If you have the door panel off already. you have to look at the back of the door latch mechanism. you will see where the wire for the door handle hooks to the door. If you are starting you have to be very careful in removing the screws for the door panel look for the hidden screws under caps with cutout.there should be a toric screw where the door handle is and another one close to where the mirror mounts. again look for caps

Posted on Apr 26, 2010

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: 2008 BMW X3, removing the left rear outer door

2004 x3 Rear passenger door handle came off/apart. What are the steps to remove the inner door panel to access the door handle and repair it?

Posted on Oct 10, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Battery is dead, doors are locked


is a hard one but I would try and get to starter motor and connect a positive lead from a backup battery to positive side of starter motorthis will give you power

Jan 27, 2013 | 2004 BMW 3 Series

1 Answer

My BMW x3 2005 back door will not close. The latch doesnt seem to catch. We tried locking and unlocking the doors you can hear the mechanism working but latch is catching. Lock/latch seems to just spin...



Hold down the "open" button on your remote and simultaneosly pull the inside handle of that door open. I just had the issue with my driver's door and as my son tried to "help" (he's 9), one of the passenger doors also got stuck! After not finding a non-tech response, played around some until the the dran latch obliged on the front door. Repeated on passenger door and whew! :-)

Mar 18, 2011 | 2006 BMW 3 Series

1 Answer

How do you put a bmw exterior door handel in


remove all inner door trim, and inner window trim, release 2 nylon blocks on top of window scissors and slide window up and out, on outside remove plastic handle trim and undo large nut round doorlock, on edge of door pop out plastic plug and undo coonecting rods, inside door at front of handle is a little cir clip holding a pin through handle, remove both, you should now be able to wriggle handle out to the inside of the car remember to watch for wires to micro switch for cental locking, rebulild is a reveral of this.

Jun 27, 2010 | 1994 BMW 3 Series

1 Answer

2008 BMW X3, removing the left rear outer door handle.


2004 x3 Rear passenger door handle came off/apart. What are the steps to remove the inner door panel to access the door handle and repair it?

Apr 06, 2010 | 2007 BMW X3 3.0si SAV

2 Answers

My back doors wont close all the the latch is in the down position ....how or what can i use to fix them the kids push in the latch ..its a 2006 bmw x3 sports edition


TAKE A SCREWDRIVER OR SOMETHING TO PUT IN THE GAP IN THE LATCH WHERE THE STIKER IN THE DOOR JAM IS WHEN IT IS CLOSED NORMALLY,& WHILE YOU HAVE THE SCREWDRIVER OR SOMETHING SIMILAR IN THE LATCH,PULL TOWARDS THE CAR WHILE YOU PULL THE HANDLE LIKE TO OPEN THE DOOR AS IF IT WAS CLOSED NORMAL,& IT SHOULD OPEN THE LATCH.

Dec 05, 2009 | 2006 BMW 3 Series

1 Answer

Is there an after market alarm system for mt 2005 bmw X3 that will work with my key's built in remote?


All bmw x3 have immobilizer and alarm system.
To check,lock car with remote
Unlock with key and open door alarm should activate
To stop alarm, shut door press remote.


Nov 07, 2009 | 2005 BMW 3 Series

1 Answer

Removal of door panel for BMW 5 series for removal of wing mirror


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls

Aug 22, 2009 | 2000 BMW 3 Series

1 Answer

Need to remove the inside door handle on my 2004 X3...please help


You will have to remove the lock and the window controls, then remove plastic plate by mirror. Also remove any other screws from the door panel.
After all screws are removed, carefully pry the door panel of with big flat-head or mini pry-bar. After if is all free and you can pull it away from the door, pull it up and off the door.

There will 4 screws holding on the door handle. You must remove plastic clip holding on door handle to the rod.

Reverse procedure for reinstall.

Jul 17, 2009 | 2004 BMW 3 Series

1 Answer

Window dropped into rear door panel. How do I remove the panel & repair


the window regulator has failed. the door panel has to be removed first which requires removing the trim piece that is on the grab handle (extremely hard to remove without breaking) there are three of four screws that hold the door panel on. once the door panel is off, the vapor barrier has to be removed. don't tear it, it is there for a reason to keep water out of the vehicle. make sure you reseal it properly with window weld. once the vapor barrier is removed you will need to unclip the window glass from the regulator. i typically will take and break the tab that holds the window. once the window is loose, move the glass all the way to the top of the door. now remove the regulator, swap the motor over, and reassembly. i would recommend taking the vehicle to a bmw dealership, around $650 for the complete repair and the dealership will stand behind their repairs

Apr 18, 2009 | 2004 BMW 3 Series

1 Answer

TRYING TO REMOVE A REAR DOOR OUTER HANDLE


Lower hole in the door jamb loosten allen screw until the cap comes off. Upper hole there is a #20 torx slightly down and inboard of the hole, you need a really long torx bit and pull the handle out slightly. It also helps to pull weatherstrip loose so you can see it.

Jul 23, 2008 | 2007 BMW X3 3.0si SAV

Not finding what you are looking for?

Open Questions:

See all 2005 BMW X5 Questions

2005 BMW X5 Logo

Related Topics:

996 people viewed this question

Ask a Question

Usually answered in minutes!

Top BMW Experts

Frankie B

Level 2 Expert

65 Answers

Fred Sops

Level 2 Expert

272 Answers

Doberman

Level 2 Expert

254 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...