Question about 1995 Mazda Protege

1 Answer

Stock stereo removal - 1995 Mazda Protege

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 154 Answers

On each side of the radio there is a cover you need to remove those, and insert a FIRM wire through the holes that you see on each side. insert the wire so that is u shaped through top and bottom, there are clips on the side of the radio that need to be pressed inward. so you add pressure to the wire outward, and pull as you are pressing, this should release the clips. if you don't care for the radio, you can force pry it out cause those clips can be a pain.

Posted on Apr 26, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Radio reset 2003 durango


Dodge Durango Stereo Removal 2004-2007 - YouTube

? 3:05
www.youtube.com/watch?v=LEuFEXBZobM
Mar 23, 2013 - Uploaded by Factory Car Stereo Repair Dodge Durango Stereo Removal 2004-2007 .... an amp inside tht if stock radio is removed it will not work unless u connect an adapter tht costs ...
Search Results
    images for 2003 dodge durango wiring

Apr 05, 2015 | Dodge Durango Cars & Trucks

1 Answer

Sorry i forgot to say i have a 1996 saturn so i need the stereo wiring color code of stock stereo to put in my new stereo


Buy a wiring kit from wal-mart or stereo shop. It will allow you to plug into stock wiring without cutting anything, and have instructions for hooking up your new system. Cheap and easy, plus you can go back to stock should you ever sell the car.

Jan 28, 2015 | Saturn Cars & Trucks

1 Answer

Stereo installation


Contact crutchfield and buy a factory interface cable. doesn't cost much.

Oct 19, 2012 | Ford Expedition Cars & Trucks

1 Answer

Cd's will not eject


IS this the stock stereo that came with the vehicle or aftermarket
if its stock than it means its gone time to replace it
all stereo's usually have a fuse built into them in the back underneath the dash that can only be accessed when the entire stereo is removed it may be blown

Sep 24, 2009 | 2002 Oldsmobile Bravada

1 Answer

INSTRUCTIONS ON REMOVAL OF STOCK STEREO


1. REMOVE THE NARROW TRIM PIECES TO THE RIGHT AND LEFT OF THE RADIO TRIM PANEL.

2.REMOVE THE GLOVE BOX.

3. REMOVE THE KNEE BOLSTER UNDER THE STEERING COLUMN.

4. REMOVE THE I/P CENTER TRIM PANEL. LOOK FOR THE SCREWS ON THE LOWER EDGES OF THE TRIM PANEL. DISCONNECT THE HAZARD SWITCH.

5. REMOVE THE HVAC CONTROL MODULE.

6. REMOVE THE RADIO.

IF YOU ARE REPLACING A STOCK RADIO WITH ANOTHER STOCK RADIO IT MAY HAVE TO BE PROGRAMMED BEFORE IT WILL WORK.

IF THIS HELPED YOU PLEASE RATE ME.

Jul 04, 2009 | 2007 Chevrolet Malibu SS Sedan New Cars

1 Answer

How to take out stock stereo and replace in 1999 lexus ES300


remove cup holders first then 2 screws on bottom then 2 screws through the ac vent and should slide right out
check ebay or a car custom place

Apr 14, 2009 | 2002 Lexus ES 300

1 Answer

Removing Stock Stereo


i have a 2000 but it should be the same....start at where the e - brake is, there is a little place where the rubber is on the ebrake where you can get under the plastic. Gently pry that up, that will remove that whole part (you will have to disconnect the cig lighter to move it completely off)
Next remove both the temperature knob and the one that selects air fow, behind those you will find two screws remove both of these and then that will pull off and then your at the radio, i don't remember if you need a tool to get it out or not but start from the bottome not the top!

Feb 15, 2009 | 2004 Toyota Celica

1 Answer

How do I remove the stock radio?


EASY!...just pry off the two small plastic moldings on either side of the stereo (they just snap back in once removed) There are 4 screws that hold in the stock radio that need to be removed...done!

Jul 24, 2008 | 2004 Chevrolet Aveo

Not finding what you are looking for?
1995 Mazda Protege Logo

Related Topics:

103 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...