Question about 2004 Ford Explorer

1 Answer

Power windows dont work and it idles to low - 2004 Ford Explorer

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 30 Answers

Easy part first....have mechanic check all co2, and air in-take sensors, Linkage for air in-take may need adjustment. Run fuel pressure check. Check all fuses for door locks and windows. Run test for electrical short. If nothing is found, replace power window motors.

Posted on Apr 25, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Isuzu d-max, working well but not idling


what year, and what country?
we dont have this car here, in usa.
what does not idle mean?
stalls.?
or too low idle speed, or too high?

Feb 11, 2016 | Isuzu Cars & Trucks

1 Answer

1996 Jeep Grand Cherokee 4.0 auto idles good but will only move with it wide open or just barely any throttle


4.0L
what transmission, mines a 5 speed stick so?????
idles good, well that dont take much.
will only move, car moves?
with what wide open ,the throttle?
well just barely throttle is normal, why say that?

my guess is car has low power, or can not go fast in all gears.
is that it?
if yes, that is transmission slip or a weak engine,
transmission slip is easy RPM goes way high car dont move
weak engine acts like brakes stuck on , low RPM deep right foot.
post all symptoms and win, big time.

Feb 22, 2015 | 1996 Jeep Grand Cherokee

1 Answer

2004 Kia Optima idles rough when AC on; idles fine when AC off -- what is the problem?


Putting on the AC causes power to be taken from the engine, and that is quite usual (unless it's taking excessive power but if there are no noises and it's working ok that's unlikely).
That will slow down the engine (similar to switching on your heated rear window whilst idling)
What you are seeing is the idle is probably a bit slow, and it's too slow with AC on. Have a diagnostic run to check idle speed and mixture at low revs.

May 08, 2014 | 2003 Kia Spectra

1 Answer

Codes are reading low tps voltage, mapps high voltage ignition on low voltage at idle. Idle surges sputers and stalls when driving. Replaceed mapp and tps with no improvment?


Have you consider to check the battery power. I believe the main problem you have is either the battery or the alternator. Due to these two things with low voltage the brain ( ECU ) does not have the enough power to work. Good Luck.

Aug 15, 2012 | 1992 Chevrolet S-10 Blazer

2 Answers

I just bought my 2001 aurora at an auction and have the following issues....1. low oil pressure light is on 2. low cooliant light is on 3. low tire pressure light is on. 4. the low fuel light is on. 5. ...


i bought a 2001 aurora at auction and it ran great but drivers side windows didnt work and had transmission code(i think it was p07410 and had low oil pressure warning when idling and oil low light came on at idle also! junk!!! i had the oil changed and oil sending unit changed and they left the plastic off the broken window and the car wouldnt start and none of the windows worked at this point! i had it towed to electrical shop and i had a short in the harness under the drivers seat(from water corrosion) that caused a transmission code, all windows not to work and car not to start! now i spent $350.00 and car starts again and pass windows work and no more transmission code! i repaced both driver side regulators and motors with new parts(also had to reparair rear track in driver door with pop rivets) now all windows work! now i'm driving car that runs great but the light for low oil pressure and low oil light are on agin ay idle(very common on these junks!!!)! get rid of the car and be done with it!!! toyota! toyota! toyota!

Oct 26, 2011 | 2001 Oldsmobile Aurora

3 Answers

Power steering pump replaced, start to work ok, after 10 milles driving, steering wheel is hard, like pump is not working, under hood everything look ok.


YOU HAVE AIR IN THE POWER STEERING SYSTEM.YOU NEED TO BLEED POWER STEERING PUMP FIRST BEFORE DRIVING VECHICLE.CHECK POWER STEERING FLUID LEVEL ADD MORE POWER STEERING UNTIL REACH FULL COLD MARK..RAISE VECHICLE FRONT WHEELS OFF THE GROUND.START ENGINE LET IT IDLE WHILE TURNING STEERING WHEEL LEFT TO RIGHT NON STOP DONT LOCK OR STOP STEERING WHEEL KEEP TURNING IT SEVERAL TIMES CHECK POWER STEERING FLUID IF LOW ADD UNTIL YOU GET COLD MARK ON DIP STICK DONT OVER FILL POWER STEERING PUMP BLOW A SEAL.IF POWER STEERING FLUID LOOK TAN COLOR SYSTEM FULL OF AIR.TURN OFF IGNITION LET CAR SET FOR A WHILE CHECK FLUID LEVEL.IF STEERING WHEEL FEEL STIFF HARD TURNING DONT DRIVE CAR UNTIL YOU HAVE NORMAL STEERING.IF STILL HAVE AIR IN SYSTEM BLEED SYSTEM UNTIL AIR IS OUT.

Feb 25, 2011 | 2002 Chevrolet Avalanche

1 Answer

I have had the power steering pump replaced on my 99 pontiac grand prix, since then it has had no problems with power steering for about two months......then all of a sudden its making that whining noise...


YOU NEED TO BLEED POWER STEERING SYSTEM BY HAVING LOW FLUID AIR ENTER THE SYSTEM.PARK CAR ON SOLID LEVEL GROUND SAFELY RAISE SUPPORT VECHICLE ON JACK STANDS.YOU CAN LEAVE CAR ON GROUND BUT TURNING STEERING WHEELS BACK AND FORTH WILL WEAR SPOT IN TIRES.TURN STEERING WHEEL TO THE LEFT WITH THE ENGINE OFF.CHECK POWER STEERING FLUID.ADD MORE FLUID IF LOW.MAKE SURE FLUID LEVEL ON COLD MARK ON DIP STICK.THE YOU CRANK CAR UP LET IDLE LITTLE HIGH FOR 15 SECONDS.THEN TURN OFF ENGINE.CHECK POWER STEERING FLUID LEVEL MAKE SURE ITS ON COLD MARK AT DIP STICK.THEN YOU START THE CAR UP WHILE IDLING TURN STEERING WHEEL IN BOTH DIRECTIONS SLOWLY TO THE STOPS DONT HOLD IN STOP TURN STEERING WHEEL LEFT AND RIGHT FOR SEVERAL TURNS.STOP ENGINE CHECK FLUID IF FLUID TAN STILL HAS AIR IN SYSTEM.LET CAR SET A LITTLE WHILE TRY THE BLEEDING PROCEDURE AGAIN.THERE IS A REASON POWER STEERING FLUID WAS LOW CHECK ALL POWER STEERING HOSES AT POWER STEERING PUMP TO THE RACK PINION ASSEMBLY.

Jun 13, 2010 | 1999 Pontiac Grand Prix

2 Answers

1995 HONDA ACCORD ROUGH IDLE


Clean your fast idle thermo valve (fitv) if that dont Work try cleaning idle Air control valve (iacv) you can go to google images to see where they are located on the intake manifold if you dont know And also if you dont know you can search google on how to clean these parts. Slightly dirty fitv was my problem cleaned it no prob. Since.

Apr 20, 2010 | 1995 Honda Accord

2 Answers

Hi my mitsubish pajero io gdi 4g93 does not idle properly with air condition on and hold backs when driveing


idle air control valve or your fact idle valve is not working properly, all two of these are housed in the throttle body.You can try cleaning the throttle body firet if it dont work you knpw what to do. Good luck.

Aug 01, 2009 | 1987 Mitsubishi Passenger

Not finding what you are looking for?
2004 Ford Explorer Logo

72 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5470 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...