Question about 2000 Mazda Millenia

1 Answer

How to replace valve cover gaskets on a 2000 mazda millenia w/ 2.3 DOHC Supercharger?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 244 Answers

Just look at the valve covers some are held in place with 6 bolts some only 3 do one at a time and keep working area clean and free of dirt n grease. clean valve cover good and have clean hands when handling gasket, and there your done just replace and bolt down , check bolts again for tightness in a couple weeks.

Posted on Apr 25, 2010

Testimonial: "Thanks for the quick reply...This info is priceless!"

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replacing supercharger procedure


1.Remove the top inter cooler piping
2.remove supercharger belt
3.remove vacuum lines (mark locations )
4.remove both injector rails
the supercharger can be pulled out ...bit of a tight squeeze
make sure that you replace all "o"rings when replacing the supercharger

Oct 24, 2012 | 2000 Mazda Millenia

1 Answer

Spark plug replacement wiring sequence for 1998 mazda millenia


Misfirng...

1998 Mazda Millenia S 2.3 liter DOHC V-6

12_23_2011_2_40_22_am.gif


1998 Mazda Millenia L 2.5 liter DOHC V-6

12_23_2011_2_41_22_am.gif


Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day and Merry X-mas.

Dec 23, 2011 | 1998 Mazda Millenia

1 Answer

Where is the valve cover gasket, and do i need two gasket left and right


yes there is left and right, you may need grommets for the bolts, Buy parts from a dealer. its very involved job, I would have a shop do it. If you have to ask where the gasket is, you should not attempt it.

Dec 06, 2010 | 2000 Mazda Millenia

1 Answer

1998 2.3 mazda millenia firing order which order it goes in


For the 1998 Mazda Millenia "S" 2.3L DOHC V6:

Firing Order:
1-2-3-4-5-6

Cylinders:
......(back)........
|...1....3....5...|
.......................
|...2....4....6...|
.......(front)

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

Jun 16, 2010 | 1998 Mazda Millenia

1 Answer

Need to find the proper routing for the belts on a 1996 mazda millenia its a 2 belt system with a supercharger.


CLICK on the following LINK. It has all the Diagrams for your Belt that you will need.
If you would: Before Clicking let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Thanks!

http://www.2carpros.com/car_repair_information/year/1996/make/mazda/model/millenia/1996_mazda_millenia_drive_belt_routing_diagram.htm

Feb 27, 2010 | 1996 Mazda Millenia

1 Answer

I am getting the smell of oil in the interior of my 2002 Mazda Millenia. The front valve cover appears to be leaking oil.Is this a tough repair job?


It shouldn't be bad. Most valve covers are just a matter of taking it off, scraping off the old gasket material, apply a little gasket sealant gunk, put on a new gasket and tighten it back down.

Dec 05, 2009 | 2002 Mazda Millenia

2 Answers

2000 mazda millenia pulled oil through the air intake and started smoking, why?


could be excessive "blow by". oil may be getting past the rings on the pistons.

Aug 08, 2009 | 2000 Mazda Millenia

2 Answers

Valve cover gasket and grammets


nonono on silicone if silicone is a must use an ultra black not a rtv silicone

May 08, 2009 | 2000 Ford Focus

Not finding what you are looking for?
2000 Mazda Millenia Logo

801 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...