Question about 1997 GMC Jimmy

1 Answer

I need the torque specs and torque sequence for my 1997 GMC Jimmy

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 75 Answers

If you donot have a shop manual go to library reference section and copy info from the professional motor manual under engine specs.

Posted on Apr 25, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I own a 1994 GMC Jimmy with a 4.3L Vortex and I need the torque specs and the torque sequence for the rocker arms if you would be so kind. Thank you


42 inch pounds. Start in the middle and work your way out. One side at a time. Snug them all down first.

May 27, 2015 | 1994 GMC Jimmy

1 Answer

1997 gmc jimmy sls 4.3l water pumo pulley torque specs


Its like 30 to 35 FT lbs 44 N-m on the 4.3

Apr 04, 2015 | 1997 GMC Jimmy

1 Answer

Head bolt torque specs on a 97 gmc jimmy 4.3


6c6b8b2.jpg
First, tighten the bolts to 25 ft. lbs. (34 Nm).
Next, tighten the bolts to 45 ft. lbs. (61 Nm).
Finally, tighten the bolts to 65 ft. lbs. (90 Nm).

Sep 22, 2010 | 1997 GMC Jimmy

1 Answer

WHAT ARE THE TORQUE SPECS FOR A CRUSH SLEEVE ON A 2000 GMC JIMMY


There is no spec for that. the sleeve must be compressed until you have the correct pinion bearing preload. The pinion must take 3-5 inch pounds of torque to spin it.

May 12, 2010 | 2000 GMC Jimmy

1 Answer

What is the torque spec for the crank pulley bolt on a 95 gmc jimmy? never torqued down to specs, could that be the reason it falls off after a month or two of driving?


The torque is 70 lb. ft.

Before reinstalling the balancer check the key way for wear both on the balancer and the crankshaft. Also when reinstalling the balancer on the crankshaft it should be a press fit. A crankshaft balancer installer kit is needed to get the balancer bottomed out in other words.

Use some sealer on the key way to prevent an oil leak.

Nov 06, 2009 | 1995 GMC Jimmy

3 Answers

Need torque specs


Torque sequence:
Step 1: Torque 29 to 34 Ft/Lbs
Step 2: Torque an additional 90 to 120 degrees

Oct 14, 2008 | 1997 Ford F150 Regular Cab

1 Answer

Heads


here is the sequence pay close attention to the numbers in the brackets

(8) (5) (9)
(12) (4) (1) (13)
(11) (7) (3) (2) (6) (10)

Note : 12 and 11 are at the vey front of the vehicle:
the torque sequence is as follows
step 1) torque all bolts to 22 foot pounds
step 2) turn bolts as follows
short bolts an additional 55 degrees
medium bolts an aditionl 65 degrees
long bolts an additional 75 degrees

Oct 06, 2008 | 1996 GMC Jimmy

Not finding what you are looking for?
1997 GMC Jimmy Logo

Related Topics:

126 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...