Question about 1998 Jeep Wrangler

1 Answer

Wont turn over

1998 jeep wrangler 4 cyl...battery is good just replaced alternator couple months ago..This past week try to start and nothing first couple times then starts. Made clicking noise now wont start at all. Totally dead...tried jumping still wont start...

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Jeep Master
  • 6,918 Answers

The starter is most likely the problem,tap on the starter lightly with a hammer while trying to start the engine,dont get run over doing this it will take two people,if the engine starts,the starter needs replacing.

Posted on Apr 25, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1995 Jeep Grand Cherokee with a 4 month old battery.A couple of the power door locks quit working a while back and my husband went out a couple of days ago and sprayed them with WD 40 but they...


check the voltage on the battery with a volt meter, it should be around 12.6 to 13 volts, if not charge battery with a charger, after charge try to start vehicle, if the vehicle starts use your volt meter at the battery again, the voltage should be around 14 to 14.5 any lower and the battery isn't being charged and the alternator should be checked and or replaced to solve the problem..

Feb 28, 2011 | 1995 Jeep Grand Cherokee

1 Answer

JUST PAID OVER $600 A MONTH AGO - NEW STARTER, BATTERY, IGNITION SWITCH, AND TUNE-UP - LEFT HOME, STOPPED AT MOM'S, GOT BACK IN 1998 JEEP WRANGLER - NOTHING! NO ATTEMPT AT STARTER, NO CLICKS, NO NOISE -...


Sounds like a faulty / intermittent Earth connection. Check all the battery and earth leads where they connect to the Battery, Engine, Starter Motor and Body. If possible disconnect, clean thoroughly by removing any corrosion or paint that could cause a poor connection, and reconnect making sure all are tight.

Sep 28, 2010 | 1998 Jeep Wrangler

1 Answer

1998 wrangler 4 cyl 110,000 miles. The engine


quite possibly it may be taking a little while to build fuel pressure. next time try cycling the key on and off 3 or 4 times with out cranking the vehicle to allow the pump to build pressure the try to star it up if it starts right up then your problem is it's just taking time to build pressure

Oct 19, 2009 | 1999 Jeep Wrangler

1 Answer

My 1990 jeep wrangler won't turn over at all


First, check battery voltage. It should be 12V Or, if really cold, high 11's (11.8, 11.9) but absolutely no lower. If you can't read voltage, charge it up. (with a battery charger, not another car) Check interior light to make sure you didn't leave it on and also the glove box (most often overlooked item... if not closed all the way, light stays on). Once charged, you can check other items in order to verify everything is OK. Good luck

Feb 15, 2009 | 1990 Jeep Wrangler

1 Answer

1991 jeep wrangler sahara shifting promblems


Your clutch is not disengaging. If it a hydrolic clutch chk. the fluid in resavor, Or slave cyl. for the clutch is bad, Or it has got air in it and needs to be bleed. This is a clutch problem, nothing wrong with trans. If its a manual clutch linkage its an ajustment thing. My best guess if its hydrolic slave cyl. went bad, or resavor is out of fluid.

Feb 10, 2009 | 1991 Jeep Wrangler

1 Answer

92 jeep wont turn over


do you have connection at the battery? have you checked fuses and the alternator? hope that helps sometimes fresh ideas work

Dec 09, 2008 | 1998 Jeep Wrangler

1 Answer

Starting/Alternator Gauge problems


It maybe as simple as corroded battery terminals. Somtimes they corrode between the post and the terminal itself.When you run light loads there is enough current passing through.When you crank the engine however,the large current flow will not pass. When you jump the car the clamps are biting on the outside of the terminal and current flows easy. Simply clean or replace the terminals and clean the posts as well to a silver shine and the trouble may go away

Nov 28, 2008 | 1997 Jeep Wrangler

Not finding what you are looking for?
1998 Jeep Wrangler Logo

380 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...