Question about 1995 Mercury Villager
Remove the 2 pin connector from the vehicle speed sensor on the top rear of th trans. clean terminals, see if fixed. If still bad, nylon gear on speed sensor is bad. 10 mm bolt holds it in but most are corroded in place and impossible to remove. Only twist & pry on metal base.
Posted on Apr 27, 2010
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
it needs to have the rear expansion valve to be inspected for metal, if clean repl expansion valve and recharge a/c
Posted on Jul 10, 2010
When you ran it out of gas you may have ruined the fuel pump. They are very touchy. you can check it by having someone listen under the car by the fuel tank and you turn the key to the on position, be sure not to try and start it. When you turn the key to the on position you should hear the pump prime its self. If you dont the pump is bad if you do then you might look into the fuel filter it may have gotten clogged when it ran out of gas.
Posted on Jun 06, 2009
Check the gas reset button located besides the parking brake pedal (red button), press it and try to turn it on.
Check with a mechanic if the gas pump still works (if you ran out of gas you could probably have damaged your gas pumpby overheating it)
Posted on Jan 11, 2010
Tips for a great answer:
Feb 08, 2011 | 1998 Mercury Villager
Mar 28, 2010 | 1999 Mercury Villager
May 06, 2009 | Mercury Villager Cars & Trucks
Apr 18, 2009 | 1993 Mercury Villager
Apr 07, 2009 | 1998 Mercury Villager
Mar 30, 2009 | 1993 Mercury Villager
484 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: