Question about Pontiac Firebird

1 Answer

Car continuously revs when depressing the clutch and then dies and won't start back up just cranks

Posted by on

  • clntnjhnsn34 Apr 25, 2010

    No noises other than normalits a 1995 v6 manual transmission

  • clntnjhnsn34 Apr 25, 2010

    It's a 1995 v6 manual transmission and there are no noises other than the sound of the engine

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,297 Answers

Might not be good news.... any engine noises before/during or after the concern?

might be simple like no clutch switch input to the PM

What year is your Firebird, what engine and what trans?

Posted on Apr 25, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I tried to start my Sonoma, but no crank. Lights, battery seem fine, but depressing the clutch yield no crank


Make sure you push down hard on the clutch just for grins then, does the engine just click, click, click? If it does the battery is not dead but it is down enough so that it wont start your car. If all the above is true/right whatever all you need to do is charge the battery. If the above is NOT true/right I need more information. Text me back and I\'ll try to help.......................Bob

Aug 31, 2014 | 2001 GMC Sonoma Extended Cab

1 Answer

Engine revs but no acceleration


Clutch plate and pressure plate seem to be too weak to pull the car. Or one of the CV joints is detached from the gear box. To test the clutch plate, park the car on flat surface. Pull the hand brake up, start the car, depress the foot brake pedal, depress the clutch pedal, put the car in 1st gear, press the gas pedal and leave the clutch pedal at once, while keeping the brake pedal depressed.
Follow one of the two following statements:
1. Engine does not shut down and remain start. (Clutch plate, pressure plate and clutch bearing defective - Replace all as a set)
2. Engine shuts down. (Clutch system is OK and does not require any repair).

May 22, 2013 | Honda Civic Cars & Trucks

1 Answer

Won't start


So it's a no crank condition? Do dash lights, gauges, and everything else work when the car won't crank over? If so, buy a cheap $5.00 testlight, and when the car won't crank, pull the small black wire off the starter solenoid. While someone holds the key in start (cranking) position and clutch pedal depressed, see if the black wire has power as it should. (Ground the testlight and just touch the wire's end terminal. If powered, the testlight will light up.) If power there, then the starter solenoid is failing. Toyota starters are very good units, but the solenoid's internal contacts get old and pitted.
If no power at the black wire, then the start circuit from ignition switch to clutch safety switch (on the clutch pedal) to starter relay to starter solenoid will have to be diagnosed. To double-check: take a single battery jumper cable and put it on the positive battery post connection. Put the other end of the jumper cable on the solenoid terminal where black wire was removed. Key can be off. Make sure car is in neutral, brake set. If starter now operates, solenoid is O.K., and it is a problem in the start circuit, -ignition switch, neutral start switch, or in the wiring.
Now find a grounding place for testlight under the dash. When car won't crank, check for power coming out of ignition switch on the black wire with white stripe. This is the start wire for the starter solenoid. Key must be in crank position. Wire shoud be powered-ignition switch is working. If no power, switch is failing. You can do the same for the clutch start switch-it's a simple switch, that when clutch is depressed switch is closed and passes power on from ignition switch to the starter relay (thus allowing power to the starter solenoid). Black wire, red stripe-this is wire from clutch switch to starter relay. When key is in crank, clutch depressed, this wire should be hot.
With me so far? Still haven't found a problem, or any loose connections? Next and last is the starter relay. It is located under dash, close to gas pedal, but under the center console, just forward and left of gear shifter. It can be tested and the wiring diagnosed there, but relays are cheap, so just swap in another and see if that helps.
If you have tried everything, and still no help, you could try a new wire from the relay to the starter solenoid. This is that black wire we started with. Older toyotas sometimes have a problem with degraded wiring not passing enough current to operate the starter

May 04, 2012 | 1992 Toyota Tercel

2 Answers

Manuel transmission wont go into gear.


First, is your clutch working? Check this by turning the engine off then put the car in first gear. Firmly apply the parking brake and fully depress the clutch pedal and hold it depressed as you crank the engine. If the engine starts and the car and revs normally then check the oil level in the trans. If the car tries to jump forward then adjust the clutch.

Jan 08, 2012 | 1997 Mazda Protege

1 Answer

4 cyl car will "rev"


It sounds like either the clutch plate or pressure plate. Can you move the car in gear without too much trouble? Some resistance, but can be done! Then you will need to replace the clutch and pressure plates.

It is most likely suspects.

Aug 14, 2011 | 1994 Mazda MX-3

1 Answer

Depress clutch turn key dash lights up. No click no nothing


you may have a bad clutch switch which will only allow the car to start with the clutch pedal depressed.it allows power through the switch only with it depressed to start the car so you won`t start the car with it in gear causing an accident.there will be a switch that the clutch pedal pushes against that allows power to flow through it to start the car.there should be power on one side with the key turned on and power on the other side with the clutch depressed.

May 25, 2011 | 1993 Geo Tracker

1 Answer

Chrysler 3.5 won`t rev past 2500 rpm?


remove the aircleaner intake hose and, check the intake air control flap for free movement

Apr 22, 2009 | 2002 Chrysler 300M

1 Answer

2001, manual transmission, car wont crank


Please give me a rating Thks Loringh

Nov 08, 2008 | 2001 Chrysler PT Cruiser

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...