Question about 2000 Ford Taurus

1 Answer

Need to take my oil pan off and change the gasket, im having trouble getting it off. what is the procedure

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 14,036 Answers

REMOVE ENGINE REAR PLATE AND THE DUAL CONVERTER Y PIPE.

Posted on Apr 25, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I remove oil pan on a 2001 gmc Sonoma pick up truck to replace gasket


1993 GMC SONOMA 2.6 CYL V6 NOT 4x4 OIL PAN ...

? 2:31
https://www.youtube.com/watch?v=1KsRTlnW7Cg
Sep 27, 2011 - Uploaded by JohnSmiths8379858
trying to reomove the oil pan to this truck has been sitting for about 6 ... 1993 GMC SONOMA 2.6 CYL V6 NOT 4x4 OIL PAN REMOVAL "HELP!

Oil Pan Gasket: How to Change Oil Pan Gasket for 2001 ...

www.2carpros.com/questions/2001-gmc-sonoma-oil-pan-gasket
Mar 18, 2011 - How to change oil pan gasket for 2001 sonoma, can i get away with just raising the engine two inches to ... 2001 GMC Sonoma • 4 cylinder 2WD Automatic • 150,000 miles ... You need to remove the engine to get the sump off.

Nov 28, 2015 | GMC Cars & Trucks

1 Answer

How can I change my 3.0 Liter oil pan gasket


Hi, Im AL the owner of Big As Auto Repair.

I actually own a 1995 Dodge Spirit 3.0 and its not to difficult. The hardest part is removing the bracket on the transmission so you can remove the dust cover for the flywheel. (1) Drain the oil. (2) Remove the transmission bracket and the dust cover. (3) Remover all the pan bolts except one, just loosen this one so you can pry the pan off, because the pan will be stuck on. (4) Clean the engine block and the oil pan very clean. (5) Install the gasket OR sealer which ever it calls for and install the pan and fill with new oil and filter. Hope this helps and please visit my Auto-Repair-Website: http://www.bigasautorepair.com/

Apr 25, 2014 | 1994 Dodge Spirit

3 Answers

Need to replace oil pan gasket for 1996 Ford F-150 2wd, I-6


Yes you can do it yourself.
Its not very easy,but with basic Auto repair tools the task can be easily completed.

=========
There are few help links with solutions to complete these task.
I suggest you to refer these links and view its procedure.

-------
Click the link below:----
------------
How to Replace an Oil Pan Gasket?
http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-oil-pan-gasket.html
-----------

KIA Sportage leaking oil from oil pan?

Go to Newly Launched

FREE Car repair gu
obyme.blogspot.com/2011/11/kia-sportage-leaking-oil-from-oil-pan.html" http://howtobyme.blogspot.com/2011/11/kia-sportage-leaking-oil-from-oil-pan.html
----------------
Oil pan Gasket on 1998
Toyota Tercel?
http://howtobyme.blogspot.com/2011/11/oil-pan-gasket-on-1998-toyota-tercel.html

-------------
VALVE COVER GASKET REMOVAL GUIDE http://technoanswers.blogspot.in/2012/06/valve-cover-gasket-removal-guide.html
--------- Car oil leaks from valve cover gasket? http://schematicsdiagram.blogspot.com/2011/12/car-oil-leaks-from-valve-cover-gasket.html

------------
How to replace Oil Pan on 2008 Honda Odyssey?

http://schematicsdiagram.blogspot.com/2011/12/how-to-replace-oil-pan-on-2008-honda.html

-----------
How to replace Oil Pressure Sensor on 2008 Honda Odyssey?

http://schematicsdiagram.blogspot.com/2011/12/how-to-replace-oil-pressure-sensor-on.html

------------
2004 Chevrolet Express Van: Oil pressure sending unit replacing? http://whoisbyme.blogspot.in/2012/06/2004-chevrolet-express-van-oil-pressure.html
-------------
HOW TO REPLACE AN OIL PUMP
http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-oil-pump.html
-------------
HOW TO CHANGE ENGINE OIL AND FILTER
http://schematicsdiagram.blogspot.com/2011/07/how-to-change-engine-oil-and-filter.html
--------------
HOW TO REPLACE AN OIL PRESSURE SWITCH (SENSOR)
http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-oil-pressure-switch.html


-------------

How to Check Differential Oil Leaks and Replace Oil
http://schematicsdiagram.blogspot.com/2011/07/how-to-check-differential-oil-leaks-and.html
-----------
HOW TO PERFORM A BASIC ENGINE TUNE UP-OIL CHANGE
http://schematicsdiagram.blogspot.com/2011/08/how-to-perform-basic-engine-tune-up-oil.html

----------
HOW TO RESET OIL CHANGE INDICATOR? http://whoisbyme.blogspot.in/2012/07/how-to-reset-oil-change-indicator.html

------------
These details will help.
Thanks.

Nov 25, 2012 | Cars & Trucks

1 Answer

How to get the tranmission pan unscrewed to change Gasket 1984 chevy c10


If you are going to change the gasket, you should also change the filter at the same time, especially if it hasn't been done recently. You will need a large drain pan to catch oil in because there is no drain plug. Remove the bolts down both sides of the trans pan, 1/2" I believe, and loosen the back ones 3 or 4 turns. Loosen and slowly remove the bolts on the front of the pan because oil will start to drain from there. Once the oil has drained remove the back bolts and drop the pan. clean it out good and check for "stuff". It's normal to see silver filings in the oil but an excessive amount or actual pieces indicate a problem. Two screws should remove the filter. Replace it and put the new gasket on and set the pan in place. Bolt it on. Torque specs for these bolts are 12-13 ft.-lbs for the Turbo 350 and 400. The 700R4 is torqued to 18 ft.-lbs.

If you have trouble getting at the rear bolts on the trans pan, you may need to unbolt the trans mount and lift the tailshaft a little with a jack to get enough room to get it there. Be gentle doing it.Hope this helps.

Sep 25, 2011 | Chevrolet Silverado Cars & Trucks

1 Answer

Change oil pan gasket


YOUR OIL PAN GASKET IS ATTACH TO TOP OF OIL PAN.WHICH SEAL TO ENGINE BLOCK.YOU NEED A HAYNES REPAIR BECAUSE YOU HAVE TO REMOVE RIGHT MANY THINGS TO GET OIL PAN OFF TO GET TO GASKET.

Feb 23, 2010 | 1999 Oldsmobile Alero

1 Answer

Is it difficult to replace all the oil gaskets? I have a leak and it seems to be getting worse.


Im assuming you mean the oil pan gasket? Oil pan gaskets are very time consuming to change on most vehicles, expecially front wheel drive because of the space. First crawl under and locate the oil pan (don't confuse with the bottom of the transmission lol). On my front wheel drive vehicle, I had to disconnect the AC lines to get to it (what a headache that was). Getting access to the oil pan is the hardest part but once you have access, the process is realitively easy. Drain the oil first or you will be taking a bath. remove the screws, clean the area the gasket is going to be touching, replace gasket and re torque the bolts to mfg. specs in sequential order as to not bind or pinch the gasket. Also, is it leaking from the valve cover? Valve cover gaskets are much easier to replace than oil pan gaskets.

Oct 07, 2009 | 2000 Chrysler Town & Country

1 Answer

How do I change the tranny fluid in my 1998 cadillac catera


Fluid - A/T: Service and Repair
Transmission Fluid and Oil Filter Changing
REMOVAL PROCEDURE
1. Raise and suitably support the vehicle. Refer to Vehicle Lift Points.
2. Place drain pan under pan
3. Remove oil pan bolts from front and sides only.
4. Loosen the rear oil pan bolts approximately four turns.
5. Lightly tap the oil pan with a rubber mallet or pry to drain the fluid from main case.
6. Remove the oil pan bolts from rear oil pan and gasket.
7. Remove front oil pan bolts leaving one corner bolt in loosely.
8. Lightly tap oil pan with rubber mallet or pry to drain fluid.
9. Remove the following remaining components:
^ The front oil pan bolts
^ The oil pan
^ The gasket
10. Remove the oil filter bolts and filter.
11. Clean the following components:
^ The transmission case
^ The front adapter case
^ The oil pan gasket surfaces with solvent
^ Air dry
^ All traces of gasket material must be removed
INSTALLATION PROCEDURE
1. Install the gasket.
2. Install the oil filter.
3. Install the bolts.
^ Tighten the transmission oil filter bolts to 20 Nm (15 ft. lbs.).
NOTICE: Refer to Fastener Notice in Service Precautions.
4. Install the front oil pan.
5. Install the front oil pan gasket
6. Install the front oil pan bolts
^ Tighten the front oil pan bolts to 11 Nm (96 inch lbs.).
7. Install the following components:
^ Install the pan
^ Install the gasket
^ Install the bolts
^ Tighten the oil pan bolts to 11 Nm (96 inch lbs.).
8. Refill the transmission with DEXRON III through oil pan fill plug on the side of the (main case) oil pan. Fill the transmission to lower edge of oil
pan fill. Fill plug opening using and oil suction gun.
^ Tighten the oil pan fill plug to 45 Nm (33 ft. lbs.).
9. Lower the vehicle.
10. Check the transmission fluid level. Refer to Transmission Fluid Checking Procedure.

Sep 13, 2009 | 1998 Cadillac Catera

2 Answers

2001 Silverado oil pan gasket is it hard to change?


it can be you must remove oil filterand housing along with oil cooler lines lower trans lines you really need a repair manual for this kind of repair for torque specs and procedures

Jul 10, 2009 | 2001 Chevrolet Silverado 2500HD

1 Answer

Oil pan gasket


TOOLS FOR THE JOB:
jack
jack stands
sockets and socket wrench
safety glasses

PROCEDURE:
1. raise your car at all four points, with jack stands
2. drain your oil
3. there will be multiple bolts surrounding your oil pan (about 10 give or take) make sure you are wearing safety glasses, remove these bolts
4. your oil pan should drop, if not provide a little bit of force
5. take your oil pan and remove old gasket
6. clean off area where gasket was removed
7. then do steps 1-3 in reverse

Jan 28, 2009 | 1993 Pontiac Grand Am

3 Answers

Oil Pan Gasket Replacement - How to - GMC Yukon 2000


No big job Really. Just locate your Drain Plug for the Oil. Thepan is right there, Remove the Bolts around the Pan and Remove. You will lose all of your oil so, Have something there to catch it all. Clean it all around the Edges of the Block where the Pan mounts with Degreaser and Make sure that you Scrape the Old Gasket off of Both the Block and the Pan. Run a Thin Bead of Blue ATV Silicone around the Pan Edge, Lay the Gasket on top of this Silicone. Put another Thin line on top of the Gasket and Reinstall. This Silicone is High Temp Silicone and will Seal Very Well. Make sure to put oil Back in the Motor! Please Rate my Response, I need all the Help That I can Get! Thanks!

Jan 27, 2009 | 2000 GMC Yukon

Not finding what you are looking for?
2000 Ford Taurus Logo

156 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...