Question about 1987 Volkswagen Golf

Open Question

HOW TO FIT SEAT BELTS IN A VW MK2 GOLF - 1987 Volkswagen Golf

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 6 Answers

SOURCE: how do i fit a performence air filter on my mk2

you want to look for the original airbox (where the air filter is) first and find the clamp that connects the pipe to the box, loosen the clamp and remove the box and then see if the air filter fits, if not then take the pipe off so you can see the intake or carb entrance put the air filter on there and that should do it

Posted on Sep 16, 2009

Ad
leroyal
  • 2120 Answers

SOURCE: mk 4 vw golf drivers seat large spring fallen out from under seat

You do not need the spring. It was only for keeping the seat back from rattling.

Posted on Nov 16, 2008

CHA55Y
  • 13 Answers

SOURCE: How do I fit coil over rear springs on VW Golf mk4

first you can loosen the top strut nuts, they are accesses from the boot and the bolt tops may have an allen key top you can use to stop the piston spinning, then you will need to jack up back of car, one side at a time, unbolt bottom of existing shocks, place new ones inplace but bolt tops in first, if they dont fit as too long to get into the bottom bolt holes, try jacking the car as high as possible and get a friend to slowly but firmly push down on the rear wheel, (btw you do this with the wheels on, just as easy as off) and with that extra clearance you should get em in.. or there are spring compressors but I doubt they will be needed, or even possible on "in car mounted" springs.. goodluck, there are also several articles on vwwatercooled.org.au, checkit!! :) Chas

Posted on Jun 08, 2009

  • 1348 Answers

SOURCE: when do i have to change in my vw golf 5 (2001)

timing belt is every 96000 km.check with volkswagen for exact and when the last time it was done,and also the water pump at the same time.

Posted on Jun 12, 2009

bobbysmema2
  • 90 Answers

SOURCE: my 16v mk2 golf has a ticking noise coming from

Your speedometer cable and or your speedometer is going bad.

Posted on Sep 25, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Which other vw engine can fit in my jetta v5 agz


you can fit anything with a cutting torch and welding gear,,, if you are in europe you can only fit a new engine of the original type that conforms to the norms on the certificate of homoglonation ,if its for road use . just noticed jetta ,this is the american version as jettas in europe are well old now so yes you could put in a engine from any of the VW range which is similar too yours ,say a golf or a seat /skoda

Jan 06, 2016 | Cars & Trucks

2 Answers

How to fit a seat arosa automatic inhibitor????


Yes i have worked on these cars but never seen a auto version as yet ?if you get a new one then you will see where it has to fit as some are inside the gearbox and some on the linkage but wherever it is it will be the same as a VW polo and one i done on a old golf was under the mechanism in the cab for the gearchange and wasnt too difficult to change

Mar 03, 2012 | Seat Arosa Cars & Trucks

1 Answer

I have a 1989 VW Golf 4 door with the 1.8 L engine. The starter has gone out. A local junk yard in Germany does not have one for the 1.8 L. Is the starter that fits the 1.3 L or the 1.6 L engine able to...


If your engine code is RP then it will not fit.You can try searching for a VW Transporter scirocco seat cordova 1.8 corrado Passat III 1,8 or Jetta 1.8 .Here are the original part numbers of the starters that will fit the 1.8 golf.

020911023
020911023
020911023
055911023D
055911023D
055911023D
055911023DX
055911023DX
055911023DX
055911023F
055911023F
055911023F
055911023G
055911023G
055911023G
055911023J
055911023J
055911023J
055911023JX
055911023JX
055911023JX
055911023M
055911023M
055911023M
055911023MX
055911023MX
055911023MX
176911023A
176911023A
176911023A

May 05, 2011 | 1989 Volkswagen Golf

1 Answer

Will a 1.0L engine from a 97 vw polo fit into a 98 vw polo?


its the same engine .ok you might have to change a few bits but its all the same engine ,got a diesel engine from a seat terra van in the yard if thats better take it away

Nov 25, 2010 | 1998 Volkswagen Golf

1 Answer

Excessive fuel consumption volkswagen golf 1.8


Hi, Lee,
you have lose earth connection somewhere.It is difficult to find.Can be anywhere.

Jun 21, 2010 | 1991 Volkswagen Golf

1 Answer

Cambelt or chain


Your 2005 VW Golf has a timing belt and not a chain.
Most importantly, your VW has what's called an interference engine.
If th eblt breaks, it will allow the valve to collide with the pistons and you will have major damage.

Be very careful to replace the belt on or before the manufacturer's recommended replacement interval.

VW originally recommended 60k miles or 5 years but that in 2004 or 2005 they changed that to 40k miles or 3 years after seeing belts (and therefore pistons and valves) go pop after about 45k.

Feb 07, 2010 | 2001 Volkswagen Golf

1 Answer

2002 VW Golf Headreast Removal


Same proceedure as front headrests but tilt the back of the seats forward about halfway. Push the little clip in on top of the seat, by the chrome rail, pull the headrest up and slide out of the hole. Push the back of the seat back, lift up the bottom seat and tilt forward. Lay the back seats down. Done.

Jan 26, 2010 | 2002 Volkswagen Golf

2 Answers

I need the torque setting for refitting a cylinder head on a mk2 golf 8v gti


1990 VW Golf 1.8L 8 or 16 valves.
step # 1 29 ft/lbs
step # 2 44 ft/lbs
step # 3 turn bolts 180deg. further in one continuous movement, two separate 90deg. turns may be used.

Dec 26, 2009 | 1990 Volkswagen Golf

1 Answer

2000 VW Golf Cabrio Rear Seat Problem


Dean, you mean the trunk lid ? Is that not normal with a key and push button on the lid ?Get a owners manual for sure.

Aug 16, 2009 | 2000 Volkswagen Golf

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

162 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...