Question about Ford Expedition

2 Answers

WHERE IS THE TORQUE CONVERTER CLUTCH LOCATED?

Posted by on

  • united_as_1 Apr 25, 2010

    I WAS TOLD THAT THERE IS AN EXTERNAL SWITCH OR SILONOIDE THAT I CAN CHANGE MY SELF.

  • united_as_1 Apr 25, 2010

    WHERE IS THE TCC SILONOIDE LOCATED AND CAN I CHANGE IT MY SELF?

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 722 Answers

The torque coverter and clutch are inside between the transmission and the engine block. The torque coverter bolts to the flex plate which is sits on the outside of the torque coverter. Pull the transmission and they will both come out with it.

It is also best to drain the tranny fluid first, as you will want new fluid if you are putting in a new converter. The clutch will be in the same place but on the outside of the flexplate. This may or may not come out with the tranny.

Let me know if you need any further assistance.

carsandcomps,

Guru, Premium Expert @Fixya.com

Posted on Apr 25, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,489 Answers

The torque converter is located between the engine and transmission. This is what is responsible for taking mechanical force(engine RPMs) and converting it to hydraulic pressure to aide in engaging the appropriate clutches to then turn it back into mechanical force to turn the wheels. To gain axcess to it, the transmission must be removed. What kind of problems are you having?

Posted on Apr 25, 2010

  • Kori Policy
    Kori Policy Apr 25, 2010

    I appologize. I failed to see "clutch". What year, make and model is the vehicle and I will try to locate service instructions for you.

  • Kori Policy
    Kori Policy Apr 25, 2010

    I understand what you are asking me. The TCC is located in the transmission either in the valve body or in a solenoid pack attatched to the valve body. The pan must be dropped to gain access.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the torque converter clutch relay (code P-0750) located?


Torque converter is inside of the bell housing on the transmission

Aug 25, 2014 | 2005 Toyota Corolla LE

1 Answer

Location of torque converter clutch soleniod


The torque converter clutch solenoid is located on the valve body inside the transmission.

Aug 14, 2013 | Cars & Trucks

1 Answer

Codes po740, po743 ? po753 all at once. Where should i begin for repairs?


You must do the diagnostics for each code.
Here are the possibilitesP0740 DODGE - Torque Converter Clutch Circuitxicon.jpghttp://engine-codes.com/p0740_dodge.htmlForum CodePossible causes- Low transmission fluid level
- Dirty transmission fluid
- Faulty torque converter clutch solenoid valve
- Torque converter clutch solenoid valve harness or connectors
- Torque converter clutch solenoid valve circuit is open or shorted
P0743 DODGE - Torque Converter Clutch Solenoid Circuitxicon.jpghttp://engine-codes.com/p0743_dodge.htmlForum CodePossible causes- Faulty torque converter clutch solenoid valve
- Torque converter clutch solenoid valve harness or connectors
- Torque converter clutch solenoid valve circuit is open or shorted
- Low transmission fluid level
- Dirty transmission fluid

P0753 DODGEP0753 DODGE - 3-4 Shift Solenoid Relayxicon.jpghttp://engine-codes.com/p0753_dodge.htmlForum CodePossible causes- Faulty shift solenoid valve
- Shift solenoid valve harness or connectors
- Shift solenoid valve circuit is open or shorted
- Low transmission fluid level
- Dirty transmission fluid

Jul 03, 2012 | 1997 Dodge Ram 1500 Club Cab

2 Answers

P0741 code


P0741 MITSUBISHI - Torque Converter Clutch System Malfunctionxicon.jpghttp://engine-codes.com/p0741_mitsubishi.htmlForum CodePossible causes- Low transmission fluid level
- Dirty transmission fluid
- Faulty torque converter clutch solenoid valve
- Torque converter clutch solenoid valve harness or connectors
- Torque converter clutch solenoid valve circuit is open or shorted
- Transmission internal mechanical problem

Jun 25, 2012 | 2002 Mitsubishi Montero Sport

1 Answer

What's your problem?Torque Converter Clutch electrical circuit kia optima 2009


This is a common GM Problem. The automatic torque converter clutch circuit is located inside the ****** and helps with smoother shifting. If it is faulty unplug the harness until the clutch circuit is repaired

Jun 04, 2012 | 1998 Ford Windstar

1 Answer

Where is my torque converter clutch located on my 98 oldsmobile aurora


The torque converter is in the front of the transmission.In the front of the trans.You need to remove the trans.to get to it.Depending on the problem your having.There are a few parts involved in the torque converter.You can try googling torque converter and you will get an idea of what is involved. Hope this helps.Good luck.

Feb 17, 2012 | 1998 Oldsmobile Aurora

2 Answers

Dashboard message - service engine soon ?? my local service station said it said - torque converter


That is located in the transmission and can be very expensive to repair/replace - Do NOT take to Amco! Did he also tell you the exact electronic code? Uusally, the code will say more than just torque converter.

Have you noticed any hesitation when you are starting to move; in reverse on on a hill - any noticeable slipping?

Jun 03, 2011 | 2004 Cadillac Deville

3 Answers

My Ford Focus 2006 4 cyc has an engine code PO741 on my OB2. What does that mean?


P0741 Torque convertor clutch circuit failure,it is located in the transmission valvle body, it is attatch to the valve body you can remove it seperately as long as your going to own the Ford focus you might as well get use to replacing these all the time,very common transmission issue with todays car. By the way it is sensitive to worn transmission fluid,when you dont service often these are suspectable to failure.

Apr 22, 2011 | Ford Focus Cars & Trucks

1 Answer

Got this code p0740, tcc circuit malfunction, I would like to replace a TCC Solenoid how do i go about it?


P0740 - Torque Converter Clutch Circuit Open

Possible Causes:
- Low transmission fluid level
- Dirty transmission fluid
- Faulty torque converter clutch solenoid valve
- Torque converter clutch solenoid valve harness or connectors
- Torque converter clutch solenoid valve circuit is open or shorted

Check your fluids 1st if they are low add fluid, and if they are dirty do a flush and a new filter. This usually will take care of it and save you money. TCCSV is a bit pricey try the cheaper route first. But it is located inside the transmission or on the side of the transmission. I dont recall exactly. Its something I would let a shop do though unless you have high mechanical skills.

Jan 13, 2011 | 2000 BMW 3 Series

2 Answers

Where is the Torque Converter clutch solenoid located on a 2005 Chevy Cavalier Auto Transmission?


Actually, the Torque Converter Clutch Solenoid is located within the transmission housing that is easily accessible through the transmission oil pan. The TCC solenoid may vary in location dependent upon manufacture but generally it is located as aforementioned. It can cause your vehicle to stall if stuck open or close because it controls loads to the engine via your torque converter which is located between the vehicle's engine and transmission. Also, make certain that you attempt to change the transmission fluid and filter before changing the TCC solenoid because that may be your underlying issue. If not, simply reuse your fresh oil and change the TCC soleniod.

Apr 27, 2010 | 2005 Chevrolet Cavalier

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...