Question about 1993 Honda Prelude

1 Answer

I need a fuse panel diagram for a 95 honda prelude

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 154 Answers

I hope this helps, well i tried to upload a pic for you but the file is to big so i will give u an address to just copy and paste.

http://spoon.org/civic/pics/Interior-Fuse-Panel.jpg



Posted on Apr 25, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need a diagram of strut rod bushings for a 95 honda accord


sorry dont have a diagram here is a how to

  1. Disconnect the negative battery cable. If equipped with an air bag, properly disable the Supplemental Restraint System (SRS), as detailed in Chassis Electrical .
  2. Elevate and safely support the front of the car.
  3. Remove the wheel.
  4. Loosen the nut at the rear of the radius rod. Remove the nut, washers, bushing, etc. Keep them in the correct order for reinstallation.
  5. Remove the bolts securing the rod to the control arm. Remove the rod.

To install:

  1. Inspect the bushings carefully for wear or deformation. Replace them if any damage is found.
  2. Fit the rod into place and install the bolts at the control arm. Tighten the bolts to 40 ft. lbs. (55 Nm) on Accords through 1989 and Preludes through 1991. On 1990-95 Accords and 1992-95 Preludes, tighten the bolts to 76 ft. lbs. (105 Nm).
  3. Install the bushings, washers and spacers on the rod. Install a new locking nut. On all except 1992-95 Preludes, tighten the end nut to 33 ft. lbs. (44 Nm). On 1992-95 Preludes, tighten the nut to 40 ft. lbs. (55 Nm).
  4. Install the wheels and lower the vehicle.
  5. Properly enable the SRS system, if equipped, and connect the negative battery cable.

Jun 17, 2011 | Honda Accord Cars & Trucks

1 Answer

Fuse box diagram i need the fuse of the head lamps from the driver side


jose6782,

Look at the back of the fuse panel cover. Usually there is a diagram there that shows what fuses are what. If not, you can google it.

Google: your make and model + fuse panel diagram. Please let me know if you need any further assistance with this.

carsandcomps,

Guru, Premium Expert @Fixya.com

Apr 26, 2010 | 1997 Honda Prelude

1 Answer

Need under steering column fuse diagram for 1988


it should be listed on the reverse or inside cover of the fuse panel box or listed in the owners Manuel book ..........check your local library for free or for or purchase at any most parts store

Sep 13, 2009 | 1988 Honda Prelude

1 Answer

Dont know which fuse is for what because there is no diagram


There is a fuse box diagram (or should be anyway) in your car manual (the one that is usually found in the glove box). If it's not there, I suggest doing a google image search. Good luck!

Jun 03, 2009 | 1992 Honda Prelude

1 Answer

1989 Honda Civic hard starting and dies for no reason. Cooling fans not working. Trouble codes are #6 coolant, #10 air intake temp, #16 fuel injector. Can anyone lead me to a solution for these problems?


6
Accord Civic CRV CRX Del Sol Odyssey Prelude
85-98 86-98 97-98 85-91 93-97 95-98 85-98 ECT Sensor (Engine Coolant Temperature)
defective circuit or unplugged / defective sensor
10
Accord Civic CRV CRX Del Sol Odyssey Prelude
85-98 86-98 97-98 85-91 93-97 95-98 85-98 IAT Sensor (Intake Air Temperature)
defective circuit or unplugged / defective sensor
16
Accord Civic CRV CRX Del Sol Odyssey Prelude
90-95 88-95 n/a 88-91 93-95 95 88-95 Fuel Injector System
defective circuit or unplugged / defective fuel injector

check your wiring for dirty connections or broken wires, you may have wires that are rubbed through or connectors that are not making full contact. you will need an ohm meter and check wires for continuity. a wiring diagram will be needed.

May 15, 2009 | 1989 Honda Civic

1 Answer

Need to know which is the main fuse? do you have a diagram for 1988 honda prelude?


the main fuse is atached to the side of the fuse box under the coin box you need to pull the fuse box out

Apr 22, 2009 | 1990 Honda Prelude

2 Answers

Taillights fuse is where?


This should sort you out - http://www.honda-prelude.com/downloads/literature

Nov 21, 2008 | 1992 Honda Prelude

Not finding what you are looking for?

Open Questions:

See all 1993 Honda Prelude Questions

1993 Honda Prelude Logo

321 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...