Question about 2008 Mazda B Series Pickup

1 Answer

Half the dash lights are out on my mazda b2500

I have tried to remove the dashboard on my 1998 mazda b2500 pickup. The lights on the right side of my instrument panel are out. I checked all the fuses and they are fine. I can't get to the instrument panel to change the bulbs. Does anyone know how to do this?

Posted by on

  • Anonymous Mar 30, 2014

    1995 pickup

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

There are several small screws to remove. It doesn't take long once you've done it and know where they are located. First you must remove the center console--there are two screws (i think 7mm or 8mm) underneath the middle part kind of hidden from view on the center console. Then remove the lower plastic panel under the steering wheel. Then a metal panel must be at least loosened enough to reach the lower screws on the dash panel you're trying to get at. Then there are three more screws along the top ledge that must be removed. Then you can get to the bulbs. I think there are 5 in there, and two in the center console. It sounds difficult and time consuming, but it only took me like 15 minutes start to finish

Posted on Sep 07, 2010

  • lanechaffin6 Sep 07, 2010

    i might add this is for a 1999 b2500, so i'm not entirely sure it'll be the same

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where are the bolts for thermostat housing


Follow the lower hose on your radator to the engine block, remove the hose and it should be right there, look at the way it is put in so you do not put it back in upside down and cause real problems.

Oct 29, 2012 | 1998 Mazda Pickup

1 Answer

Where is the flasher module in a 98 b2500 mazda pick up


It is the same as the a Ford ranger. The location is Under the dash to the left of the steering column.

Jul 24, 2012 | 1998 Mazda Pickup

1 Answer

Need location of turn signal flasher, so I can replace.It is a 1998 mazda B2500


It is located under the kick panel near the emergency brake IN the fusebox,

Jan 20, 2011 | 1998 Mazda Pickup

2 Answers

Were i can find blower fuse or relay in 1999 mazda b2500


I had the same problem , turned out to be a solder joint failed on the resister , quick easy fix , resister is held in with 2 screws under the heater body , easy to get to and check , 2 plugs go in to it , B2500 2002 4X4

Aug 19, 2010 | 1999 Mazda Pickup

1 Answer

98 mazda b2500-my turning signal/hazard lights no longer work


You need to replace the flasher module, this is the module that controls the "Blinking" function of the lights, its a mostly a common part that you can get at any auto parts store for less than 10 bucks and is located in the Fuse panel under the dash, its round in shape in one corner of the panel. mostly they are green in color.

Oct 02, 2009 | 1998 Mazda Pickup

1 Answer

Scaner won't power up when pluged into dlc


Fuse #5 10A Data Link Connector (DLC)
located in.

Passenger compartment fuse panel
The fuse panel is located on the left
hand side of the instrument panel
facing the driver’s side door. Pull the
panel cover outward to access the
fuses

Jun 02, 2009 | 1999 Mazda Pickup

1 Answer

Looking for the fuel pump shut-off switch for 1998 Mazda Pickup


The fuel pump shut-off switch is
located in the passenger’s foot well,
behind the kick panel. There is an access hole.

Mar 27, 2009 | 1998 Mazda Pickup

1 Answer

How do I find the on/off safty switch for fuel line in a 1998 Mazda Pickup truck.


the inertia fuel shut off switch is located behind right side of instrument panel , below glove box . not knowing which model truck , i checked b3000 and b2500 and b4000 , all are in the same place .

J5

Jan 20, 2009 | 1998 Mazda Pickup

1 Answer

Dashboard Lights will not go on Mazda Pickup B2500 1999


As long as all fuses are good, you need to check the light switch its self. Remove the light switch assembly from the dash. With a 12 volt circuit tester, check the wiring coming out of the switch. The dash lights will be powered along with the side marker lights.

Probe each wire that joins the switch, turning the switch on and off. If you don't have any loss of power here, it can be at the printed circuit board at the dash.
Bill

Nov 19, 2008 | 1999 Mazda Pickup

Not finding what you are looking for?
Cars & Trucks Logo

1,085 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...