Question about 1999 Daewoo Lanos

1 Answer

Have a 99 lanos-clutch

Have a 99 lanos-the car is manual transmission-possible clutch went out but then we got in after setting for a couple weeks and it went through all the gears and was fine until stopped and went to take off again then it would not go into any of the gears- any ideas??

Posted by on

  • uncj10 Apr 25, 2010

    so can you tell how to check to see if i clutch hydraulic problem

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 7,353 Answers

As long as it does not slip (eng speeds up, but car doesnt) you MAY have a clutch hydraulic problem. Ck that first. If the clutch hydraulics are OK then the only thing that could do that it a pilot bearing bad (seizing) but I dont think that is your problem.

Posted on Apr 25, 2010

  • Ted Schore Apr 28, 2010

    Does the pedal feel normal? If the fluid is low, there is a external leak and you will need to replace both the clutch master and slave cylinder. If the Fluid is ok, and if you hold the clutch pedal to the floor with the eng running, in gear and after a while (10 seconds- 1 minute) it trys to pull away in gear, there is an internal leak, and you will need to replace the master and the slave. I fthere is a pilot bearing problem then it will be like your not even pushing the clutch pedal down, the pedal feels normal, and the pedal and clutch components are operating OK.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Manual transmission won't go into gear


Sounds like the clutch disc is toast.
Its possible the throw-out bearing has failed, but either way the transmission has to come out to fix either part.

Dec 24, 2012 | 2008 Subaru Forester

1 Answer

2003 ford transit turbo manual gearbox, stuck in 2nd gear, cant start


does the clutch push normally or is the linkage broken not disengaging clutch, and then does shifter move around or locked and wont move, loose linkage in shifter or gears are jammed inside transmission and something went, if shifter wont move at all then trans is jammed inside and needs repair.

Jun 09, 2012 | Ford Transit Cars & Trucks

2 Answers

I have a 99 gmc sonoma that won't go into gear and there is no presure on the clutch pedal it goes straight to the floor but the fluid level is still on full and the fluid has some black looking gunk...


It is confirmed that the clutch hydraulics has faulted. Since there is no clutch the gear links are not engaged. Possible that the master cylinder has failed, possible a leak in the system.
You will need to overhaul this section and the pedal will respond.
Also check on the transmission fluid and the gear settings.

Sep 30, 2011 | 1999 GMC Sonoma

4 Answers

The clutch pedal is rock hard won't go in too gear checked the clutch master cylinder and thats ok, so do you know what the problem is.


Possible solution! Daewoo Lanos 98-99
Had the same problem suddenly the clutch pedal went rock hard!
The clutch was around 3 months old.
Mechanic checked - Master, Slave, Clutch Components, and inside the box, all looked okay.
Turned out the top arm of the clutch pivot rod had twisted, replaced pivot rod around AU$100.
Fixed Problem!

68f141a6-6e26-4193-91d9-bdf12856e824.jpg 8ee95b47-7be0-4e27-81a1-a4ccf7bbc122.jpg

Apr 16, 2010 | 2004 Land Rover Discovery

1 Answer

99 jeep wrangler 4.0 won't start


yes the crank sensor is probebly your problem.

Jul 18, 2009 | 1999 Jeep Wrangler

1 Answer

Car manual


Here is probably the best bet for you.  http://www.alldatadiy.com/buy/index.html  It is an online repair manual you can purchase the rights to for 1 or 5 years.  Stinks you can't have it forever but most people don't keep cars for more than 5 years anyway, right?  I've had to use this for my Isuzu Trooper because I went through the same thing you are right now when I tried to find a manual for it.

May 17, 2009 | 1999 Daewoo Lanos

2 Answers

Daewoo racer gti


Hi Gracieland,
I found a manual on CD for my Daughters 99 Daewoo Lanos on ebay motors cars/trucks... type in 99 daewoo lanos manual and it should bring up some.
Hope this helps.
Sallycna@msn.com

Jan 29, 2009 | 1999 Daewoo Lanos

1 Answer

Clicking/knocking sound and feel when shifting & smell


first check the clutch hydrolic fluid. If it's low or leaking, it may not disengage the clutch completely causing the disk to drag (and smell) The knocking sounds like you're loosing the thowout bearing and/or possibly the disk (there are cushion springs that may have come out of place). Take it to a transmission shop that does free diagnosis. anything other than fluid-related is going to be pricey.

dont forget to rate ... and dont shoot the messenger

Jan 03, 2009 | 1999 Volkswagen Beetle

Not finding what you are looking for?
1999 Daewoo Lanos Logo

Related Topics:

288 people viewed this question

Ask a Question

Usually answered in minutes!

Top Daewoo Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

yadayada
yadayada

Level 3 Expert

75797 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Are you a Daewoo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...