2009 Chevrolet Cobalt Logo

Related Topics:

Posted on Apr 25, 2010

I want to remove my front bumper on cobalt ss

I'm not really great with cars,but i want to remove my front bumper on cobalt ss turbo and put a new one on...and i really want to try to do it myself . does anybody can tell me how to do that?or give me any link with instructions

5 Related Answers

bumpincobalt

  • 2 Answers
  • Posted on Jun 10, 2008

SOURCE: stereo removal 06 cobalt

you must remove all the plastic face plates around the radio then remove the radio itself.be cautious as you could damage the clips that hold the plates in place.

Ad

Anonymous

  • 1010 Answers
  • Posted on Jun 26, 2008

SOURCE: 1986 chevrolet el camino ss front bumper

I think the beat soultion is to go to a mechanic and take advice from him.

Anonymous

  • 23 Answers
  • Posted on Jan 17, 2009

SOURCE: I drive a 2005 Chevy CObalt SS-S and it won't start.

starter could be bad or battery could be bad, live in cold weather conditions or warm humid conditions?

Anonymous

  • 10 Answers
  • Posted on May 25, 2009

SOURCE: I need to remove the front headrest of a 2008 chevy cobalt lt

Push the button and pull up on it at the same time

Anonymous

  • 11 Answers
  • Posted on Jun 16, 2009

SOURCE: Chevrolet Cavalier Bumper

if it is a body kit then yes it would fit most body kits go all the way to 2003 i have a body kit on my cavalier and said it would work for 96-2002

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer
0helpful
1answer

Torque specs for a 2006 Chevy Cobalt please?

Really need to know what? That search his normally the torque that the engine produces on the road.


2006 Chevy cobalt 2.2 L engine torque specs for - Fixya

https://www.fixya.com > Forum > Cars & Trucks
Jan 9, 2018 - Tighten to 40-50 Nm (30-37 lb-ft). Rotate an additional 175-185 degrees. Go to next bolt in sequence. Short Bolts: Tighten to 20-30 Nm ...
Torque specs head bolts 2006 chevy cobalt 2.2 ecotec - Fixya
May 12, 2013
need head bolt torque specs for 2005 chevy cobalt 2.2l ecotec
Sept 1, 2019
I need bolt torque specs for a 2006 chevy cobalt - Fixya
Nov 17, 2009
Torque specs for a 2006 Chevy cobalt - Cars & Trucks - Fixya
Feb 10, 2022
More results from www.fixya.com

Torque Specs!! - Cobalt SS Network

https://www.cobaltss.net > ... > General > General Cobalt
Apr 13, 2017 - General Cobalt - Torque Specs!! - Well.. I just received some things and was wondering on some torque specs. ... CobaltSS422 , 09-01-2006 11:37 PM.
Wheel lug nut torque spec? - Cobalt SS Network
Aug 8, 2010
2007 cobalt 2.2l. ls. Cylinder head bolts torque?? - CobaltSS.net
Aug 28, 2014
Lugnut torque specs - Cobalt SS Network
Sept 29, 2015
Exhaust manifold bolt torque specs - Cobalt SS Network
Apr 15, 2017
More results from www.cobaltss.net

Torque Specs, Fluid Capacities ' Chevy Cobalt Forum

https://www.yourcobalt.com > ... > Problems and Service
May 15, 2010 - straight from gm global connect! Approximate Fluid Capacities The following approximate capacities are given in English and metric ...
How To: Replace Your Wheel/hub Bearing - Chevy Cobalt ...
May 5, 2010
Wheel Studs ' Chevy Cobalt Forum
Mar 20, 2012
How-to Replace Lower Control Arms ' Chevy Cobalt Forum
Mar 5, 2013
Transmission/Motor Mount Torque ' Chevy Cobalt Forum
Jun 15, 2018
More results from www.yourcobalt.com

Chevrolet Lug Nut Torque Specs Table - Sparky Express

https://www.sparkyexpress.ca > blogs > autoverse > che...
Model Trim Year Range Torque ASTRO ALL / MINIVAN 1985 ? 2002 100 ft?lbs ASTRO MINIVAN / BASE/LS/LT 2003 ? 2005 140 ft?lbs AVALANCHE 17"BASE / LS 2002 ? 2013 140 ft?lbs
0helpful
1answer

2009 cobalt 2.2l cam shaft position actuator bank 1

Here's a link James,stroll down and you will see a picture of it at the engine and how to remove. Code P0010 P011 Easy Fix Chevy Cobalt Forum Cobalt Reviews Cobalt SS...
1helpful
1answer

How to install a front bumper for a 1996 Honda accord sedan

Installation of a front bumper can be complicated. These helpful instructions may help a person with this task. If you choose to install a bumper yourself, please be cautioned that professional installation is always recommended. Please confirm before you start that your safety equipment has been applied to you, your car and your new bumper. These 10 easy steps can make a difficult install relatively easy.
The following steps are detailed instructions that you can follow. It is very important that you make sure to read each step carefully and completely:
1. Look closely at the new bumper and your car for screws, bolts and clips. Remove these pieces from your existing front bumper and place them in a safe area. Follow this by the full removal of the cars current front bumper.
2. Next, test the fit of the new front bumper. Make sure that nothing hinders with the placement and fit on the car.
3. If the fitment is correct the installation process may move forward.
4. If the fitment is incorrect then the removal or repositioning of certain components, such as reinforcement bars may be required. This is because every car is different. If this is the case remove the element and test fit the front bumper again. This should be done with caution and is done at the installers own risk.
5. Most of the time the new aftermarket bumper is placed the exact way the factory piece was. The most important key to great fitment in installation is the drilling procedure. The holes should be drilled in the places that will give the piece a great fit. Usually, these holes will be drilled in the same place as the factory bumper. At this point only mocking is required.
6. When the bumper is in place, shaving or filing maybe required. Many parts will require this because certain areas are made with more material to lower the risk of damage. Also, if a car has been in an accident or previously modified, this may cause additional sanding, cutting or filing.
7. Now that the front fits well, be very precise and drill the holes.
8. Prepping for paint is what needs to be done after the holes have been drilled. Depending on what material the front bumper is made of will determine the steps for prepping.
9. After the piece has been painted, clear coating may be appropriate.
10. Make sure there are not any leftover parts and that everything is secure. After this is done, your front bumper installation process is complete.
1helpful
2answers

Chevy cobalt 07 charging fuse/ alternator has been tested good

i have a 05 cobalt SS Superchaged and i bought it new and had to warrenty two batteries and i put another battery n about 7 months ago
0helpful
1answer

2007 chevy cobalt ss need help

Sounds like you are not getting the full throw of the slave cylinder. If you do not disengage the clutch completely it will shift hard, and sometimes you have to double clutch like you would an old truck. Have whoever put in your clutch bleed the clutch system again.

Hope this helps.
3helpful
2answers

How to change air filter 2006 colbalt ss

Its a pain but under your car are about 6 8mm bolts that you have to take off to get the filter out also you will have to take your driver front tire off to get the last few bolts to gain access to the air box there are 3 screws on the box that comes off and you can pull out the filter and put new one in and do the reverse.
1helpful
1answer

I drive a 2005 Chevy CObalt SS-S and it won't start.

starter could be bad or battery could be bad, live in cold weather conditions or warm humid conditions?
0helpful
1answer

1986 chevrolet el camino ss front bumper

I think the beat soultion is to go to a mechanic and take advice from him.
Not finding what you are looking for?

823 views

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...