Question about 1999 Honda Accord

1 Answer

Trying to locate new drivers side power window regulator for 1999 Honda Accord 2 dr 2.3ltr the original regulator has no cables, uses mechanical scissor motion, has large half moon gear. All replacements so far look like they all have cables.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 7,353 Answers

Contact you local dealer, with your VIN number.... I m sure they have them.

Posted on Apr 25, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Service manual


If you can take off the inner door panel-not that hard to do-then you could see what caused it to be off track, and probably fix it. If the window regulator mechanism has to come out of door to fix it, a little more difficult but within the scope of experienced owners who do their own work. It will save you big repair bills.

Jul 27, 2013 | 2004 Honda Accord

1 Answer

My 1995 Honda Accord power windows just stopped working. Drivers side is fine. It is the rear 2 windows and the front passenger side will not go up. Checked fuses they were all fine. any suggestions?...


It could be the motor of the power windows.

  • Troubleshoot
    • 1

      Check the fuses and switches. Your owner's manual and fuse-box cover have fuse and switch diagrams. Look for the power window relay and power window motor labels. Tug out the fuse and check it for damage. Check the switches for deterioration or abnormalities. You can get a new fuse or switch at an auto parts store or super center and easily replace it.

    • 2

      Get out your tool box if you've eliminated fuses and switches as the cause of the problem. Now you have to remove the door panel to get a better look at your window's power source. For the driver's side and passenger-side doors, remove the door pad and inner moisture barrier. Use an upholstery-removal tool to help pry the panel off. The rear windows require that you remove the two center channel screws at the top of the door frame and two lower bolts in the bottom of the door. Check under the weather stripping if those bolts aren't evident.

    • 3

      Lower the window until the glass bolts are visible. Use the 10mm socket wrench to remove the bolts in the large and smaller access holes. Standing at an angle inside the door, tip the glass gently toward the outside of the door. Pull it out and set it in a secure place.

    Inspect the Motor and Regulator
    • 1

      Access the regulator by removing the front channel and regulator mounting bolts. Older models have additional roller bolts.

    • 2

      Use a digital voltage meter to test regulator power before completely removing it. A reading of less than 12 means you have a wiring or switch problem. Recheck the fuses and switches. A reading of 12 means your wiring and switches are getting power to the motor, so the motor is inoperative for another reason.

    • 3

      Remove the motor and regulator. Wear protective gloves and keep your hands clear of the regulator gear spring. You can expect it to snap abruptly on removal.

    Install New Power Window Motor and Regulator
    • 1

      Use oil to grease the roller guides and sliding surfaces of the regulator after removing all the parts. Confirm that the breather pipe is in position to keep water out of your new motor.

    • 2

      Advance the new regulator gear with your gloved hand. Use the collar and mounting bolt to secure the new motor in place. Replace the front door run channel.

    • 3

      Slide the window glass back into the door. Advance the regulator with the power window control in the door until the glass mounting bolt holes line up with the access holes. Replace the window mounting bolts.

    • 4

      Test for smooth operation of the window. The window should move up and down easily and form a tight seal when closed. Tighten or loosen window mounting bolts as needed.

    • 5

      Replace the liner and door panel. Dispose of the dead motor.

  • you can read more: How to Fix Power Windows in a Honda Accord ' eHow.com http://www.ehow.com/how_4520901_fix-power-windows-honda-accord.html#ixzz1Jj3YBoi0

    Apr 14, 2011 | 1995 Honda Accord

    1 Answer

    How to change window regulator in a 1997 honda accord on front drivers side


    you take off door panel and plastic wrap and this give you access then it should be on the motor or around the motor and should only be 2 or 3 bolts take around 2 hours novice mechanic

    Sep 13, 2010 | Honda Accord Cars & Trucks

    2 Answers

    My driver's side window has fallen into the door. I have a 2000 Honda Accord. The motor on the auto window is still running.


    the regulator assembly is broken. Some vehicles use a cable guide while others use the old scissor style regulator/lifts.

    Oct 05, 2009 | 2000 Honda Accord

    1 Answer

    Power window on a 97 honda accord wont go up


    possibly your power window regulator is out. basically check the fuses first to make sure you have not blown that, if it is good, then you can order a new window regulator from the dealer or online @ autopartswarehouse.com. to replace the window regulator you will need to will need to remove the door panel, start with the screws on the handle and the arm rest, covered with a plastic cap. the door panel which can be pryed from the bottom with a flat blade screw driver or flat pry bar, it will make a snapping sound. three bolts on the regulator 4 bolts on the window tracks and 2 bolts securing the window, re assemble as you have taken apart, Good Luck!!

    Sep 10, 2009 | 1997 Honda Accord

    2 Answers

    2002 Honda Accord Power Window


    the regulator has stuck /the cable may be pinched in the arm /other than taking the door apart that is the only way/ Please rate my response thank you very much

    Jan 31, 2009 | 2002 Honda Accord

    1 Answer

    199 honda accord mechanical issues


    Check ebay for the regulator if you do not have a wholesale place to get it.

    Nov 19, 2008 | 1999 Honda Accord

    1 Answer

    2 dr honda accord power window problem


    I wouls suspect you have either a inoperative window regulator (the frame work for the power glass) or a bad power window motor. More often then not the are sold as a single assembly and are not very hard to replace on this vehice.

    Jun 27, 2008 | 1999 Honda Accord

    Not finding what you are looking for?
    1999 Honda Accord Logo

    Related Topics:

    81 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Honda Experts

    yadayada
    yadayada

    Level 3 Expert

    75797 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22114 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    8140 Answers

    Are you a Honda Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...