Question about 1998 Toyota Corolla

1 Answer

I have a 98 Toyota Corolla VE. We changed the

I have a 98 Toyota Corolla VE. We changed the gasket valve cover and the gromitts. The car starts up but when I put it in gear to drive forward or backwards it doesn't move. It is a standard shift model.

Posted by on

  • sherridandra Apr 25, 2010

    Would you happen to know where the Clutch Master Cynlinder is located?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 14,036 Answers

CHECK CLUTCH MASTER CYLINDER.SEE IF YOU HAVE FLUID IN IT.YOU COULD HAVE KNOCK THE FLUID LINE TO CLUTCH MASTER CYLINDER A LOOSE.WHILE WORKING ON VALVE COVER.

Posted on Apr 24, 2010

  • Jonah Oneal Apr 25, 2010

    CLUTCH MASTER CYLINDER IT PART OF BRAKE MASTER CYLINDER WHICH GOES TO CLUTCH SLAVE CYLINDER..

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Changing valve cover gasket


i don\'t know offhand but to be official around 14lbs. These are only little bolts, so a 3/8th rachet and two fingers about halfway down the handle will be the right torque .

Jun 30, 2013 | Cars & Trucks

1 Answer

Where is the 2002 corolla fuel pressure test port


LOOK ON THE FUEL INJECTORS RAIL YOU SHOULD SEE A BLACK CAP THAT LOOK LIKE A TIRE AIR PRESSURE STEM REMOVE THE CAP AND FUEL PRESSURE REGULATOR IS THERE

Sep 25, 2012 | 2002 Toyota Corolla

1 Answer

Chevy Prizm or Toyota Corolla 2000 valve cover gasket problem? Right after oil change, engine check light came on & car started smoking & losing oil. I took out all 4 spark plugs: they were in very...


The valve cover gasket isn't hard to change. Oil on the plugs indicates a more serious problem. Smoke from the exhaust would be from rings, rich mixture, worn valve guides. It may be that the engine is overfull (that would show on the stick). Oil loss from a leaking gasket would smoke under the hood and leave oil on the engine and the ground.

Mar 25, 2011 | 2000 Chevrolet Prizm

1 Answer

Replace cam and crank gaskets


Simple. Changing your valve cover gasket will include the cam gasket and for the crank gasket, just remove your transmission and crankshaft pulley and you will have access to the change the two crank gasket.

Jan 18, 2011 | 1996 Toyota Corolla

1 Answer

1996 Toyota Corolla Valve Cover leaking oil


i have a 1996 1.3 toyota corolla and i changes my roccer cover off a glanza turbo and my car leaked oil we changed the gasket but still seemed 2 b leakin a small bit we also put on gasket sealer now the car is not leakin oil but the oil light is commin on only when the car is under 1000 rpm does any1 no wat is worng with it?

Apr 07, 2009 | 1996 Toyota Corolla

3 Answers

Toyota Corolla 1999 code p0301


I HAVE A COROLLA 1999 MODEL. IT IS MISFIRING. I CHANGED THE PLUGS AND CHECK ATHE INJECTORS. NOW I DONT KNOW WHAT TO DO BECAUSE THE ENGINE STILL VIBRATES AND THE CHECK LIGHT IS ON

Dec 12, 2008 | 1999 Toyota Corolla

3 Answers

1994 Toyota Corolla - Valve COver Gasket Replacement


You need an aftermarket serviice manual from Haynes or Chilton. They will have that kind of info.
I know of no car (I don't know them all) where that is needed and depending on the cover material (sheet steel or cast), could lead to warping and new leaks. I always use a thin film of silicone whether it is specified or not and there are torque specs for ALL valve covers I have ever seen.  

Sep 13, 2008 | 1994 Toyota Corolla

Not finding what you are looking for?
1998 Toyota Corolla Logo

270 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...