Question about 1999 Ford F350 Regular Cab

Open Question

How do you remove side mirror lights 2008 F450

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

satanchild30
  • 8 Answers

SOURCE: no brake lights or turn signals on 2008 F450

try checking all of your fuses and see which ones are blown. you have two sets of fuses and they are under the hood of the vehicle and under the dash on the driverside or in the glove box. if the don't work after changing the fuses then your wiring for the turn signals and brake lights need to be cheked from the fuse boxes to the swith for the trurn signal and to your brake lights

Posted on Mar 24, 2009

  • 6 Answers

SOURCE: How do you remove 2008 F350 side mirror?

you will have to remove the door panel there should be another bolt under there and you need it off to unplug the conector for the mirror

Posted on Apr 14, 2009

shadtremonky
  • 353 Answers

SOURCE: take apart passenger side mirror chevrolet 2008 tahoe

get some eye protection
then pry the pieces out
also try pooring hot water on it to soften the glue

Posted on Jun 20, 2009

  • 1986 Answers

SOURCE: Replacing side mirror on 2008 Dodge Grand Caravan

On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door

Posted on Sep 29, 2009

  • 1986 Answers

SOURCE: How to replace a side mirror

On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door

Posted on Sep 29, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I install a manual side mirror


Has to be on there with screws or bolts

Have to remove door panel IF you see no screws to remove

Jul 17, 2014 | 2008 Hyundai Accent

1 Answer

On my 2008 ford F350 the driver side mirror marker lights are not working. I need to know how to repair them. Thanks


If it's just that the bulbs that have burnt out you'll need to position the exterior mirror glass inward toward the vehicle.(Note: Use caution to not trap the side lamp assembly wiring during installation, or damage to the wiring may occur.) Using a flat blade screwdriver or something similar, push the mirror side lamp assembly forward while releasing the retaining clip. Separate the bulb holders from the mirror side lamp assembly and remove the side lamp. Replace the bulbs and reassemble. I hope this helps you out.

Mar 08, 2011 | Ford F-350 Cars & Trucks

1 Answer

How to replace the driver side mirror on a grand cherokee 2008?


REMOVAL
292392.jpg 1. Partially remove the door trim panel as necessary to gain access to the mirror.


292318.jpg 2. Disconnect the wire harness connectors (2) from the mirror. 3. Remove the three nuts (1) that secure the mirror to the door and carefully remove the mirror.

Feb 05, 2011 | Jeep Grand Cherokee Cars & Trucks

1 Answer

Were is the fuse for running lights on a 2011 ford f450 no running lights


There are two site for the fuse box. Either under the hood, look for a black plastic box. Or it must be under the dash on the driver's side.

Sep 11, 2010 | 2008 Ford F 450 Super Duty

1 Answer

How to change mirror turn signal light, 2009 f250


- Adjust the mirror so the mirror glass is in as far as it will go (meaning if you were looking in the mirror you would see the side of the truck)

- Look inside the mirror housing
- Locate silver clip
- Using a flat screw driver, push the clip in
- Lenses will pop out on the outside
- Remove bulb
- Replace bulb
- Snap back together when new bulb in place.

Mar 27, 2010 | 2008 Ford F 250 Super Duty 4WD

1 Answer

How to replace cabin filter on 1999 Ford F450


remove wiper arms and cowl grille. on passenger side under the grille is the cabin filter

Jun 26, 2009 | 2008 Ford F 450 Super Duty

1 Answer

2008 Ford Fusion Wing Mirror Replacement


I checked Ford Focus mirror replacement and it seems to be the same. This is for the manual, unheated mirror.

Remove the mirror cover inside the door - slide a screwdriver behind the cover and pry loose carefully.

Remove the single 10mm bolt and the mirror comes free.
NB. Do not drop the bolt into the door.

Apr 02, 2009 | 2008 Ford Fusion

1 Answer

No brake lights or turn signals on 2008 F450


try checking all of your fuses and see which ones are blown. you have two sets of fuses and they are under the hood of the vehicle and under the dash on the driverside or in the glove box. if the don't work after changing the fuses then your wiring for the turn signals and brake lights need to be cheked from the fuse boxes to the swith for the trurn signal and to your brake lights

Mar 24, 2009 | 1999 Ford Super Duty F 450

3 Answers

Cab off engine repair 2008 ford f450


there is no reason to remove the cab even if you need to remove the engine it can be done with the cab in place

Dec 22, 2008 | 2008 Ford F 450 Super Duty

1 Answer

Replace passenger side power mirror clearance lamp (bulb only).


If you are facing the passenger side mirror adjust the top (large) mirror so that it is turning in towards the truck as far as it will go. Then look behind the mirror in the bottom righthand corner (outside bottom corner) and you will see a silver metal clip. Take a straight head screw driver and push on that clip and the lens will pop out. Then you simply unscrew the bulb holder from the lens and replace your bulb. Good luck!

Oct 16, 2008 | 2008 Ford F-350

Not finding what you are looking for?
1999 Ford F350 Regular Cab Logo

Related Topics:

135 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...