Question about 2000 Nissan Maxima

1 Answer

I replace a clutch on a 96nissan and now with the lutch cable all the way adjusted stillhave slop in the pedal

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Nissan Master
  • 6,918 Answers

Check the pivot shaft bushing on the clutch pedal,

Posted on Apr 24, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ford everest 2011 3 litre4x4 dual clutch slipping in top gears clutch has only done 40000 long distance kilometers. Help


if hydraulics clutch system , replace the master cylinder ( blockage in compensating port or incorrect clutch pedal adjustment under dash
if cable clutch replace the cable or again adjust the clutch pedal for free play

Jun 10, 2016 | Ford Cars & Trucks

1 Answer

Put a cluth in a 1991 toyota mr2 turbo 2.0 and its still grinding when I shift gears.. what can I do to solvve my problem


have you replaced your fly wheel and release bearing when you changed your clutch disc?

if yes, then replace your transmission fluid.
also, if you know hot to adjust your clutch release, adjust it. adjust it in a way that you need to draw back your clutch pedal a little higher for the clutch to complete engage.

here are some ways to adjust your clutch.

1. for clutch using clutch cable. open your hood, locate for the transmision, and there you can see a cable that connects the transmision and the clutch pedal. loosen in up a little.
2. for hydrovac clutch with self correcting features. just pull your clutch pedal away from the floor for a few seconds and its done.
3. for hyrovac without self correction. manually adjust the push rod (metal rod that connects the clutch pedal to the clutch master)

Aug 08, 2011 | Toyota MR2 Cars & Trucks

1 Answer

Can you adjust a clutch on suzuki vitara 2.7


I think you will find the actuating system is hydraulic, hence not adjustable. There may however be some small adjustment on the rod which connects the clutch pedal to the clutch master cylinder to take the slop out of it. You would feel that kind of slop when you push the pedal down. Clutch is good for about 10 years of normal driving, so you are at 12 and it is time for a new clutch.

Mar 08, 2011 | 1999 Suzuki Vitara

1 Answer

How to adjust the hydraulic clutch slave cylinder locknut that is under the dashboard


the slave cylinder is bolted to the bell housing, its motion moves the throw out bearing. the master cylinder is connected to the clutch pedal. the adjustment will only take any slack out of the rod which is moved by the clutch pedal up against the piston of the master cylinder. it only needs adjustment if the clutch pedal has any slop in it.

Nov 09, 2010 | Mazda 323 Cars & Trucks

1 Answer

The clutch pedal on Suzuki vitara two litre V6 1998 goes to about inch of floor before activation. Clutch does not slip just too much pedal travel. Is it possible to adjust it? ...


prev.gif next.gif Clutch ADJUSTMENTS 1997-98 Models CLUTCH PEDAL HEIGHT The clutch pedal height should not be a periodic adjustment but may be checked after components of the mechanical clutch system have been replaced. The proper clutch pedal height should be 0.2 in. (5mm) above the brake pedal height If adjustment is necessary, loosen the locknut and turn the adjusting bolt until the appropriate height is reached. Once set, keep the bolt from turning and tighten the locknut to secure the adjustment. CLUTCH PEDAL FREE-PLAY The clutch pedal free-play should be checked from time-to-time in order to assure proper clutch operation. The proper clutch free-play should be 0.6-1.1 in. (15-25mm). Fig. 1: Pedal free-play is adjusted at the joint nut (2), while keeping the outer cable nuts (3) tightened around the center cable thread portion 7924hg30.gif
  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2. If the free-play must be adjusted, turn the joint nut (2) located at the transmission end of the clutch cable in or out, as necessary to achieve the proper play.
  3. Once the correct pedal free-play is obtained, check the free-play on the release arm (c), it should be 0.02-0.06 in. (0.5-1.5mm).
1999-01 Models These vehicles are equipped with a hydraulic clutch system. No adjustment is necessary.

Nov 05, 2010 | 1999 Suzuki Vitara

1 Answer

Put a new clutch cable on my escort but no good as i can not adjust the pedal


LIFT THE CLUTCH PEDAL TO DISENGAGE THE ADJUSTING MECHANISM.THIS MUST BE DONE DURING CABLE INSTALLATION AS FAILURE TO DO SO WILL RESULT IN DAMAGE TO THE SELF ADJUSTER MECHANISM.INSERT THE CLUTCH CABLE THROUGH THE DASH PANEL AND THE DASH PANEL GROMMET.( WARNING ) BESURE THE CLUTCH CABLE IS ROUTED UNDER THE BRAKE LINES AND NOT TRAPPED AT THE SPRING TOWER BY THE BRAKE LINES IF EQUIPPED WITH POWER STEERING ROUTE THE CABLE INBOARD OF THE POWER STEERING HOSE.PUSH THE CLUTCH CABLE THROUGH THE INSULATOR ON THE STOP BRACKET AND THROUGH THE RECESS BETWEEN THE PEDAL AND THE GEAR QUADRANT.LIFT THE CLUTCH PEDAL TO RELEASE THE PAWL ROTATE THE GEAR QUADRANT FORWARD AND HOOK THE CABLE INTO THE GEAR QUADRANT.INSTALL THE CLUTCH SHIELD ON THE BRAKE PEDAL SUPPORT BRACKET.ON THE TEMPO OR TOPAZ INSTALL THE PANEL ABOVE THE CLUTCH PEDAL.USING A PIECE OF WIRE CORD OR TAPE SECURE THE PEDAL IN THE UPMOST POSITION.INSERT THE CLUTCH CABLE THROUGH THE INSULATOR AND CONNECT THE CABLE TO THE CLUTCH RELEASE LEVER IN THE ENGINE COMPARTMENT.REMOVE THE DEVICE USED TO TEMPORARILY SECURE THE PEDAL AGAINST ITS STOP.ADJUST THE CLUTCH BY DEPRESSING THE CLUTCH PEDAL SEVERAL TIMES.INSTALL THE AIR CLEANER.

May 31, 2010 | 1995 Ford Escort

1 Answer

Is the clutch adjusted by a cable? If so, how?


Nope, there is an automatic adjustment device at the clutch pedal. If the clutch only operate when the pedal is near the floor and you have about 150000 km you might need a new clutch.check the device at the pedal first for broken teeth, otherwise replace the clutch including the clutch bearing

Jan 30, 2010 | 1993 Ford Escort 4 Door

1 Answer

Clutch Linkage


I am sorry to inform you that there is no adjustment for the clutch on a 93 Mazda MX-3 in the 1.8 or 1.6 model. They are both hydraulic, which means that it keeps all the play out of it, on its own. The fluid fills up any slop at the slave cylinder. When the clutch starts to slip it is time to replace it. There is an adjustment in the pedal for free play and height, that's all.

Oct 29, 2008 | 1993 Mazda MX-3

2 Answers

Clutch slipping


first i would try adjusting the clutch cable because commonly people with think that they're clutch is going out when really just the cable has gotten stretched....try adjusting that first and if that works then you should be fine for another couple thousand miles but if you want to not have to worry bout it for awhile i would just replace teh clutch assembly....usually ranges from $200 to $450 depending on the clutch set and the mechanic that does the work for you. Let me know what happens. :)

Oct 01, 2008 | 1990 Peugeot 405

Not finding what you are looking for?
2000 Nissan Maxima Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...