Question about 2001 Dodge Dakota

2 Answers

Whinning out passengers side window sounds like coming rear

Change axle bearings on both axles as garage said that was problem after repairing both sides new bearings problem still exsists please suggest other as paid 500. and problem still there.

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 7,353 Answers

So did the garage suggest and replace the bearings to repair the noise? You need to find another garage that knows what they are doing. maybe its the tires?

Posted on Apr 25, 2010

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 170 Answers

Axle and bearing issues can be hard to pinpoint. I assume you mean they replaced the outer bearings. There are still inner bearings called carrier bearings as well as an inner and outer pinion bearing.

I would take it back and tell them they have not fixed it right yet.

Posted on Apr 25, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have whinning noise when turning right or slowing down sounds like a power steering noise in rear end


A whinning noise while turning is an indication of a worn bearing. The extra pressure put against the bearing/race during the turn and the closing of a gap creates this noise.I would chech the axle bearings on the side of the truck on the outside the curve when you hear it. What I'm saying is if you hear it when you turn left....check the right side bearing

Sep 17, 2014 | 2004 Dodge Ram 1500

1 Answer

Rear end makes rowing sound above 30 miles per hour also tjere is a leak of rear end grease on the left rear wheel.


THE LEAK is an axle seal leaking the noise is bearings in rear end could be axle bearing of carrier/pinion bearings while driving shift weight of truck side to side see if noise changes if so it is axle bearing if not then most likely differential bearings

May 11, 2011 | 1995 Chevrolet Blazer

1 Answer

How do i pull rear wheel bearings


Replacing outer wheel bearings on a solid axle rear end is a moderately involved operation.

The rear axle cover has to come off so that you can remove the C clips to allow the actual axle to come out. Once out, a bearing puller is needed to remove the old bearing, and a bearing installed may be needed to drive in the new one.

If this sounds out of your comfort zone, a shop should charge $200-$300 to make the repair.

Jun 30, 2010 | 1999 Dodge Durango

2 Answers

Drivers side rear axle is leaking, not brake fluid, has disc brakes, what do i need to do to replace seal?


i will tell you right off this is a job for a qualified mechanic,the axle has to be pulled off first you jack up that wheel dismantle the brakes and rotor and behind the axle hub are four bolts that hold on the axle remove them and axle will come off the rear end cover does not have to come off and the axle fluid also does not have to come out,but now that axle is out you will notice that a wheel bearing is holding the seal in place this is pressed in you can buy these as a set at the dealer but must be removed by a pro. as not to harm axle and it has to be pressed back in

Feb 06, 2010 | 1995 Jeep Grand Cherokee

3 Answers

How to change my front differential seal and bearing ? passenger side. I bought a new wheel bearing because of a humming sound on passenger side and doing so saw leaking seal and maybe the humming was...


That will be a Huge job. The whole front diff must come out of the car and the case will need to be taken apart to even gain acess to the carrier side bearings.
The hub bearing is where the wheel bolts up is that maybe what you are talking about?
Also the axle seal isn't that bad to do you need to remove the cv shaft then it's just a simple remove the seal and install the new one.
But all of these jobs will be big ones.

Oct 13, 2009 | 1999 GMC Jimmy

2 Answers

Whinning noise in rear end on 99 dodge ram truck. Where can I find information to possibly replace rear bearings??


Not terrible of a job to do. You will have to jack up the rear end and support it on stands and be sure to chock the front wheel so it does not roll forward while jacking it up. Remove the rear wheels and the drum assembly or rotor if disc brakes. Remove the rear differential cover be sure to have a drain pan to catch the fluid that comes out of it. Find the center carrier you will see a pin about 3/4 of inch in diameter going throught the center carrier with a bolt on one end remove the bolt turn chunk until pin comes out. Push the axle in enough to let the c-clip to be removed then pull out the axle. You will then have access to the axle seal and axle bearing. You will probably need a bearing puller with slide hammer to get bearing out. Then put back together.

Sep 24, 2009 | 1999 Dodge Ram

1 Answer

Rear seal and bearing leaking on passenger side.


Basic to get tire and hub off, remove rear diff cover remove bolt, remove clip, pull axle out, then heavy puller to pull bearing and seal. Ck axle for wear

Sep 16, 2009 | 2001 Ford F150 Styleside SuperCrew

1 Answer

Rear axle bearing lock washer and nut coming loose


You may have incorrect axle end play. The left axle is fitted with a 1mm shim and an o-ring between the bearing housing and diff flange. The right bearing housing should be shimmed to suit specs. If the right axle has too much end play, it may try to walk.

Aug 16, 2009 | 1988 Mitsubishi Pickup

1 Answer

Need to know how to change rear wheel bearing in a 95 suburban


jack & support vehicle. remove rear axle cover drain fluid, removeleft rear tire drum/rotor brakes, remove bolt in axle housing that holds the 3/4 inch pin in place pull pin , push left axle shaft inwards and remove c clip from inside axle case,slide out axle shaft,remove seal,remove bearing and install in revers

Jan 16, 2009 | 2003 GMC Sierra

Not finding what you are looking for?
2001 Dodge Dakota Logo

95 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...