Question about 1996 Mercury Sable

3 Answers

Alternator replacement what do I need to do? mercury sable 1996 Duratec moto (s) 3.o

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hope you have it replaced by now but if not you need to go in from the bottom you have to disconect yhe lower ball joint swing it out of the way you will have to undo bolts and move it around to disconect wires Just be sure to conect wires 1st when putting it back in there is no way to conect once you bolt it into position hope this helps

Posted on Jun 15, 2010

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Remove and replace... that was alot of help. you forgot to say open the hood. people need to know what to move out of the way, should you go from the top or the bottom of the car... things like that

Posted on May 17, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,317 Answers

Disconnect the positive battery cable from the battery. Unplug the plug to the alternator. Remove the nut holding the other wire to the alternator. Remove the belt, make sure to record the belt routing. Remove the alternator mounting bolts.

Posted on Apr 25, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I've got a 99 mercury sable 3.0, replaced all head gaskets and water is still getting in the oil! What could it be and what could I do???


eplacing head gasket, need advice - Taurus Car Club of America ...

www.taurusclub.com > ... > Maintenance and Repair
Apr 3, 2013 - Vehicle is a 1998 Taurus 3.0L, Gen3 Vulcan, used as a daily driver, ...target="_blank">Replacing Head Gaskets On A Ford Taurus 3.0L V6 ... With all that coolant going through the exhaust your O2 sensors are toast. .... Drives: 96 Mercury Sable LS Wagon 3.0 DOHC Duratec .... 1999 Taurus need help.

Nov 23, 2015 | Mercury Cars & Trucks

1 Answer

2003 Sable engine change


check the location of the cam position sensor. if they are in the same place ,then use all the sensors from the old motor

Jan 09, 2013 | 2003 Mercury Sable

1 Answer

Will a 3.0L DOHC Duratec 30 V6 from a 2000 Sable fit in a 2003 Sable?


how do i change my DPFE sensor on my mercury sable 2000 .

Jan 09, 2013 | 2003 Mercury Sable

1 Answer

2001 sable 24 valve duratec water pump belt routing


The water pump on the Duratec 30 on the 2001 Mercury Sable is driven by a separate belt on the driver's side of the engine. You can see the belt easily form the top of the engine compartment. The pump is driven by a belt from one of the overhead camshafts in the front bank of cylinders. The diagraom that is provided does not go to the water pump on the 24-valve 3.0 liter in the 2001 Sable.

Feb 19, 2012 | 2002 Mercury Sable

1 Answer

Does a 1996 mercury sable and 2001 ford taurus have the same engine


Its possible. In this time span Ford used two different motors, the overhead valve (OHV) Vulcan V6, and the Duratec 24V V6, which will bear the 24v DOHC badge on the front fender.

Aug 31, 2011 | 1995 Mercury Mystique

1 Answer

1998 mercury sable wagon with the V6 Duratec engine getting a P1131 reading what is it


its running lean on bank 1, eitehr a vacuum leak, or an o2 sensor.

http://www.denlorstools.com/autoblog/2009/07/ford-p1131-p1151-fault-codes-30-dohc-o-2-diagnostics/

Sep 03, 2010 | 1998 Mercury Sable

1 Answer

1997 Mercury Sable with duratec engine with 178,000 miles on it . What is best oil to use in engine?


Several oil brands have "high milage" oil for vehicles with high miles. I would go with a 10W/30 oil.

May 03, 2010 | 1997 Mercury Sable

2 Answers

Mercury sable 2001 duratec engine DOHC I get check engine light and diagnostic code PO401". Any suggestions?


Barring any vacuum leaks, P0401 is indicative of a bad EGR valve. Hope this answers your question. Best of luck.
Greg

May 30, 2009 | 2001 Mercury Sable

Not finding what you are looking for?
1996 Mercury Sable Logo

174 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

fordexpert

Level 3 Expert

5495 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...