Question about Dodge Pickup

1 Answer

How often should someone repack the front wheel bearings on a 3500 dodge ram 2wd diesel

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Dodge Master
  • 2,030 Answers

It doesn't hurt to do it whenever the brakes are done....if done properly, then it shouldn't need done more often than that.

Posted on Apr 24, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Torque specs for 2005 dodge ram front wheel bearing hub - 3 bolts


I need more info. Is this a 1500--2500--3500, 4wd or 2wd?

Feb 24, 2018 | Dodge Cars & Trucks

1 Answer

Location of heater fan resistor on 2004 dodge ram 3500 diesel 2wd


Please visit this YouTube link for a detailed explanation on the location and how to replace the resistor. http://www.youtube.com/watch?v=5Q2rM1pGw5k

Thanks,
Will

Dec 01, 2013 | 1998 Dodge Ram 3500 2WD

1 Answer

I have a 1999 dodge ram 3500 Diesel 4x4 and I go threw front pads and rotors. It sings when I'm driving down the road that the brakes are on could it be the master cylinder


YES IT COULD BE, BEST TO JACK VEHICLE UP AND SPIN WHEELS TO SEE IF THEY ARE BINDING.
IF SO CHECK CALIPERS WHERE PADS FIT SEE IF SEIZED ON SLIDERS.
ALSO CHECK FLUID LEVEL IF TO HIGH THE FLUID CAN NOT RETURN WHEN NOT PRESSED + SEE IF ITS BLACK FLUID NOT CLEAR, SIGNS OF CYLINDER FAILIURE

May 16, 2012 | 1998 Dodge Ram 3500 2WD

1 Answer

On my 2001 Dodge Ram 1500 5.2 2WD, I just found


This is a very simple job to do. Raise the front of truck off the ground,block the rear tires. Using pliers and a hammer,remove the grease cap from hub. Remove the cotter key and nut from axle,pull out slowly and remove outer bearing. then remove hub from axle. To remove inner bearing ,prop hub on a board and use a large punch to drive out bearing and seal. Clean out inside the hub and install new bearing and seal. Replace all parts in the reverse as you took them off. Hope this will help you.

May 14, 2010 | 2001 Dodge Ram 1500 Truck 2WD

1 Answer

2005 dodge 2wd 3500 front hub assembley.. how do i


there are three mounting bolts behind the wheel studs
remove the bolts
remove abs sensor
slide the hub out of steering knuckle

Mar 05, 2010 | 2005 Dodge Ram 3500

1 Answer

2007 dodge ram 3500 5.9 liter cummins diesel 2WD tie rod end repa


try moving the ends of the tie rod. there should be a metal sticking out of the rubber ball like part at the end. A worn out tie rod would be easily moved with bear hands while a new one will take some muscle.

Jun 30, 2009 | 2007 Dodge Ram 3500 Quad Cab Laramie

1 Answer

Noise right front wheel sounds like wheel bearing, 1998 Dodge 3500 Van


try steering the the car to the right and the left while driving down the road. listen for the noise to get louder or quieter as you steer the car. which ever direction you steer and it gets louder it will be the bearing on the other side. for example if you turn right and it gets louder its the left bearing because you have just shifted the vechical weight to the left side by turning right. and also in that same situation the bearing would get quieter because you have just unloaded the left bearing and put the weight to the right side.

Mar 16, 2009 | 1998 Dodge Ram 3500 2WD

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

133 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

78267 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...