Question about 1995 Ford Windstar

2 Answers

I have a 95 ford winstar with a no 4 cyclnder missfire I replaced the plugs wires and injecter but still has missfire

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 4,369 Answers

It could be a bad coil. Your coil pack contains 3 coils. Each one fires 2 cylinders at the same time, but only one is on comprssion stroke with fuel being injected. I assume ou changed hte plug already, but you did not say you did.

Posted on Apr 24, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 775 Answers

Replace the coil

Posted on Apr 24, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

98 f150 4.6 missfire cylindars 4 and 5


Exchange cylinder 4 and 5 parts with 2 other cylinders and see if the problem goes to the other cylinders.Start with this first.

Jun 12, 2017 | Ford F-150 Cars & Trucks

1 Answer

02 ford escape #4 and #6 missfire


does 4 & 6 run off same coil? if so i would look at that coil or wireing to that coil

Jun 16, 2012 | 2002 Ford Escape

1 Answer

Im looking for someone to tell me im changeing a 302 motor from a 95 f150 2wd and putting it into a 89 ford f250 4x4 both fuel injected but wireing harness plugs are different is there any easy way i can...


you are going to need to hook up the 95 as if its the 89...so take all harnesses and components and swap them. you have to swap injectors, manifolds ect. the basic engines are the same, but everything else may be differet, you have them both, so you should be able to tell what you can tell what needs to be changed and not. I know the injectors are different, and may not even plug in. .

Dec 04, 2010 | Ford F-250 Cars & Trucks

3 Answers

My S-10 keeps giving a P0300 dtc. Can't figure out what is setting this code. Usually misfires at idle. Any suggestions?


if u change plug wires ,coils ,plugs and still having problems check the injecter with a pulse light the one that dont pulse the pcm is bad are broke wire if all of them are pulseing then change the injecter.had the same problem on a 2000 s10 2.2

Apr 27, 2010 | 2000 Chevrolet S-10

1 Answer

Ford focus 1.8 peterol zetec shuderring/missfire


Check your fuell filter. You may have low pressure from a clogged filter. Also do a full tune up, plugs, wires and cap and rotor if it has it. Some fuel injector cleaner may help as well. As a precaution have the pressure regulator on the fuel injection rail checked before you do all the other things. They can go bad without warning. Good luck.

Apr 20, 2010 | 2000 Ford Focus

1 Answer

Missfiring on one cylinder


Sounds like you have covered all the basics except the plug wire which might be bad.....the plug wire goes "deep" into the head & u cannot see the end of it r somewhere close 2 the end that the wire is shooting fire out of the side grounding itself to the head before the spark plug...look for a very small burn mark on the side of the wire after running the car or while running,lay the wire on the head lookfor a spark out the side of it.Good Luck!!!!!! P S BEEN THERE 7 DONE THAT!!!!!!

Jan 31, 2010 | Daewoo Lanos Cars & Trucks

1 Answer

Missfiring on one cylinder


do you know the firing order? if not check it and re configure the plug wires to that order

Jan 31, 2010 | 1999 Daewoo Lanos

1 Answer

Put on analyzer number 4 cycliner is missfiring


Replace the spark plugs and wire set and add fuel injector cleaner in the gas tank for the next three fill up's. If money is tight try swapping the spark plug wire with another wire and see if the missfire moves, but before you do that inspect the spark plug's condition. Remove the spark plug to see if it's fouled with carbon which is a run rich condition and if there was detonation the plugs will have a worn or damaged electrode. Keep me posted, be glad to help.

Jun 30, 2009 | 2000 Ford Contour

1 Answer

Winstar 2001 missfire no 6 cyl under load intermitent


Get spark plugs and leads checked or replaced

Jul 19, 2008 | 2000 Ford Focus

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

99 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...