Question about 1986 Ford Bronco

1 Answer

I have a 95 bronco 351 w auto trans my truck will drive fine lots of power but after driving a lil while it will just die or studder usually it will start right back up but some times you have to wait like 15 minuts it cranks great i just replaced the fuel filter dist rotor cap spark plugs and wires do you have any ideas?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 2,359 Answers

A stick open (or defective) EGR valve is the most likely cause of this problem.

EGR valve let partly of the exhaust return to the intake system.

This valve is pull open by vacuum.

A vacuum leak or aged EGR valve will level the opening between exhaust to intake at an incorrect level.


Posted on Apr 24, 2010

Testimonial: "thanks i will have to smoke out my vacuum system to see if i have a leek "

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Will a f350 with a 460 ci transmission fit in a 95 f150 with a 351ci


I guess the short answer is I doubt it.
The 460 engine should be a big block and the 351 is probably a large 302. I would expect the bolt pattern for the bell housing to be different along with the mounting and the tail shaft.
The 460 should have a bigger drive shaft than the 351.
If you can get the model of the 460 trans a salvage yard should be able to tell you if they will interchange.

Jan 04, 2013 | Ford Cars & Trucks

1 Answer

1988 chevy suburban 1/2 ton auto trans; 4 wd; dies after putting into drive


Could be a dirty throttle body or faulty idle air control valve.
Is the check engine light on ?

Jul 09, 2012 | Chevrolet Suburban Cars & Trucks

1 Answer

I need the fireing order for my ford bronco its got a 351 its a 95 i need a the gap for the spark plugs *** well


The firing order on the 351 that came in the 1995 Bronco is: 1-3-7-2-6-5-4-8
The spark plug gap should be on the emissions sticker under your hood, usually on the radiator support. It may also be on the underside of the hood.
If you cannot find the sticker, try a .044 gap, if that doesn't work go a little higher to a .052.

Jul 30, 2011 | 1995 Ford Bronco

1 Answer

Can I tow a 1985 ford bronco II 4x4 with hubs and a 5 speed manual trans. without disconnecting the drive line


yes if you make sure the front hubs are disengaged(turn little hub releases in middle of the wheel,man trans is ok auto not ok you do need to remove the drive shaft of an auto not man

Oct 26, 2009 | 1985 Ford Bronco II

1 Answer

Bronco idles to fast and now will not shift to drive


well the fast idle is most likely caused by a leaking upper intake runner base gasket, this high idle may be related to the trans no engaging, fix the idle problem by remove the upper intake runners and installing a new base gasket and keep your fingers crossed

Sep 18, 2009 | 1989 Ford F 150

1 Answer

Trans


if they are same size engine, it should be fine

Feb 20, 2009 | 1989 Ford Bronco

1 Answer

1995 Ford Bronco dies when coming to a stop.


The idle air control solenoid could be bad. give the engine a vacuum leak and see if that helps any

Oct 15, 2008 | 1995 Ford Bronco

1 Answer

Runs fine for a few


it might be the fuel pressure regulator, i have a similar problem with my 95 302. but mine just dies but starts right back up. i was told fuel may be evaporating out of the fuel lines, when it doesnt start the first try i pump the gas pedal 2-3 times and it starts right up.

Jul 17, 2008 | 1995 Ford Bronco

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

137 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...