Question about 2004 Chevrolet Impala

1 Answer

Cannot find the fuse for the turn signals.. they both quit working and sh has the flasher ... I am guessing there is a fuse, don't know... the manual has nothing in it to correct the problem.. HELP!!!!!

Posted by on

  • stepmckirgan May 11, 2010

    So you are saying with the turn signal switch you have no signals but the hazard button makes the signals work. the fuse panel is located ( usually) to the lower left of the driver's steering column.

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 4 Answers

Sounds like flasher unit has relay built in. Change flasher unit should solve problem.

Posted on Apr 25, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My turnsignals dont work on my 1987 honda accord flashers do work


flashers and turn signals have separate flasher and separate fuse.

Mar 14, 2016 | Honda Cars & Trucks

1 Answer

My turn signals quit working on my 98 explorer after working on the gas tank. Is there anything by the gas tank that would affect the turn signals?


there is a hazard flasher and a turn signal flasher. if the hazards work turn them on and find the flasher making the noise this will show what it looks like as the turn signal looks the same. the signal should be around the same area somewhere as the manufacture does not put them in a set location. if the hazards do work then the wiring is good and working on the gas tank had no affect with your problem. if they don`t work then you may have damaged the wiring in that area and will have to take a look.

Sep 24, 2014 | Cars & Trucks

1 Answer

Where is the location and # of the turn signal fuse on a 2000 saturn L100?


Since it is both signals out a flasher may also be at fault. The flasher is located with the fuse box, located usually on left side of dash either on the end covered by the door panel(when closed) or near the feet kick panel or next to steering column. While I don't own your particular car this is what i can think of right now.

Nov 03, 2012 | 2000 Saturn Ls 4dr Sedan

3 Answers

I have a 2001 Oldmobile Intrique and as of late the turn signals don't work properly. Sometimes they will function but now they simply don't come on or work only during the first turn and then...


I would guess that the turn signal switch is worn out

You said they work some times,so the flasher is good

You need a repair shop i assume

You didn't meantion your expertise in
troublshooting electrical issues

Jul 14, 2011 | 2001 Oldsmobile Intrigue

1 Answer

My turning signal don't work but the flashers do work. I have changed all fuses and they still don't work.


since you know where the fuses are, you also know where the flashers are. the flashers are the same part so unplug the one for the emergency flasher and put it into the socket for the turn signals and vice versa. if the signals now work but not the emergency flasher you know to get a new flasher unit at any parts store. the flasher units are cubes about an inch on each side plugged into the fuse panel.

Jun 27, 2011 | 1995 Chevrolet Caprice Classic

1 Answer

How to fix turn signal on 86 Chevy Astro Van


you don`t say but do the lights work either on the front/back on both sides.if not then it may be a fuse that needs replacing or need a bulb replacement.if the lights work but don`t flash then it sounds like a signal flasher problem.the flasher is located in the fuse panel under the dash on the drivers side.if the hazard flashers work then turn them on to find the hazard flasher by the fuse panel then you will know what the signal flasher looks like and change the signal flasher.make sure you change the one for the signals and not the hazard one.if the hazards work then i would say the signal switch is good as the hazards work through the same switch.

Apr 21, 2011 | Chevrolet Astro Cars & Trucks

1 Answer

Cruise control and left turn signal does not work


this sounds like a bad signal flasher.it is located on the fuse panel under the dash on the drivers side.if you turn on the hazard flasher and look for it you will know what the signal flasher looks like as it is a separate flasher for the signals.check all the fuses as the cruise may just need a fuse.other than that you should have it checked out as the parts are expensive to guess what will fix the problem.

Apr 01, 2011 | 2003 Ford Crown Victoria

1 Answer

My signals and flasher quit working 2002, Jeep Grand Cherokee


in your vehicles owner manual, look up fuses, and flasher units or flasher relay. Fuses are normally located under the dash, but when both turn signals quit working it is usually the relay. The relay is located under the hood yours owners manual should show you the location.

Oct 27, 2009 | 2002 Jeep Grand Cherokee

2 Answers

2006 Saturn Vue turn signals and flashers have quit working.


the switch is most likely faulty. You can also check any wiring with a voltmeter

Oct 02, 2009 | 2006 Saturn Vue

1 Answer

MY TURN SIGNAL QUIT WORKING IS THERE A FLASHER


My service manual states that the '02 T+C has a combination turn signal/hazard flasher/daytime running lights module which is located on the junction block, adjacent to and left of the steering column. To access it, you must remove the steering column lower cover and knee pad panel. There is also a fuse for turn signal/hazard flasher. If none of them work, check the fuse 1st.

Jul 18, 2009 | 2003 Chrysler Town & Country

Not finding what you are looking for?
2004 Chevrolet Impala Logo

70 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6918 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...