Question about Honda Accord

1 Answer

What size is the rear axle nut on a 99 honda accord 4 cly so i can remove the brering

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,319 Answers

It will be a 32mm socket. Here is a photo of the socket on the nut you are speaking about to be sure

http://www.honda-tech.com/showthread.php?t=2513299

Posted on Apr 24, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can i replace my starter on my 2008 honda accord 4 cly?


Hi,just undo earth on battery,then jack the car up and put it on axle stands,there is the main cable wich you take off and there maybe two wires if so unplug them,then just undo the two or free bolts and it will just come out nice easy job..
all the best

Apr 19, 2015 | 2008 Honda Accord

2 Answers

Axle nut size


measure across the flats of the nut and that will be the size of the socket. Use an adjuster spanner and measure the opening== example if it is 30 mm across the flats then it will be a 30 mm socket

Apr 19, 2014 | 1990 Honda Accord

1 Answer

Center axle nut will not come off of my 1993 accord


I've had to use a monkey wrench on a socket, with a large, three foot long piece of steel pipe as a breaker bar, to remove some of those stuck Accord axle nuts.

Mar 18, 2012 | 1993 Honda Accord

1 Answer

How do you remove the rotors from a 1991 honda accord?


Loosen both front wheel lug nuts and raise car and support on jack stands. Remove wheels and have a friend hold brake pedal down and remove axle nut. Use a chisel or screwdriver to remove stake on nut to axle edge. I use a 3/4 drive set socket and remove axle nut. Rent it from Autozone. Remove caliper assy and support with coat hanger or bungee cord to hold weight of assy off of brake hose. Remove Cotter pin and nut on lower control arm. Separate with ball joint fork and pull strut assy away to the side while pulling stub axle through and out of the way. Remove 4 bolts holding rotor and hub assy. on the inside of steering knuckle and separate. Now remove 4 bolts on hub's outer side and separate rotor and hub. You can use a bar or large screwdriver between wheel studs to loosen the 4 bolts.

Aug 04, 2010 | 1991 Honda Accord

1 Answer

How to replace a wheel hub bearing on drum brakes on a honda accord 1999 4 cly


First thing to do is jack up the rear end and put wood blocks behind the front wheels for your safety. Next thing is to remove the rear wheel, then using a flat head screwdriver, pry off the center cap on the hub. Now grab a 32mm socket and a decent breaker bar to break that center nut free. Now, remove the two philips head screws that hold the brake in place and then using a 13mm socket, remove the two bolts that hold the brake caliper on, they are located behind the splash shield. While you are at it, take a 11mm socket and remove the handbrake cable holder and the brake hose holder bolts. Now swing that caliper out of the way and slide off the brake hub and bearing and replace with the new one.

Apr 20, 2010 | Honda Accord Cars & Trucks

2 Answers

How to remove a rear hub assembly bearing on a 99 honda accord 4 cly 2.3.


acdf6cf.gif



The rear wheel bearing and hub unit are replaced as a unit.
  1. With the vehicle on the ground, loosen the spindle nut.
  2. Raise the vehicle and support it safely.
  3. Remove the rear wheels.
  4. Remove the brake disc retaining screws.
  5. Unbolt the brake hose brackets from the knuckle.
  6. Remove the caliper bracket mounting bolts and hang the caliper out of the way with a piece of wire.
  7. Remove the brake disc. If the disc is frozen on the hub, screw two 8 x 1.25mm bolts evenly into the disc to push it away from the hub.
  8. Remove the spindle nut and pull the hub unit off of the spindle.

Clean the backing plate and the mating surfaces of the brake disc and hub with brake cleaner. Clean the spindle, washer, and hub with solvent.
To install:
  1. Inspect the hub unit for signs of damage or wear. If the bearings are worn, the entire unit must be replaced.
  2. Install the hub unit and spindle washer onto the spindle. Install the spindle nut but do not tighten it.
  3. Install the brake disc and tighten the retaining screws to 7 ft. lbs. (10 Nm).
  4. Install the brake caliper and tighten the mounting bolts to 28 ft. lbs. (39 Nm). Install the brake hose brackets onto the knuckle and tighten the bolts to 16 ft. lbs. (22 Nm).
  5. Install the rear wheels and lower the vehicle.
  6. With the vehicle on the ground, tighten the new spindle nut to 181 ft. lbs. (245 Nm), then stake the nut with a punch.
  7. Tighten the wheel nuts to 80 ft. lbs. (108 Nm).
  8. Test the operation of the brakes.

ADJUSTMENT

The wheel bearings are not adjustable or repairable and should be replaced if found defective.

Thanks for using FixYa!!

Apr 20, 2010 | Honda Accord Cars & Trucks

1 Answer

Changing cvc joints 1997 accord


replace the entire CV axles. Support vehicle with jackstands by frame. Remove front wheels. Remove axle nuts. Remove lower balljoint nut. Separate balljoint from nuckle by banging hard with ball peen hammer on knuckle on spindle assy. Remove outer tie-rod nut. Separate tie-rod from steering nuckle by bangin on nuckle with ball-peen hammer. Use long pry bar to hold lower control arm down while simultaneously pulling hub/spindle assembly away from vehicle and pushing axle through hub toward transaxle. Go under vehicle and pry inner cv joint away from transaxle while holding axle assembly.
Install new CV axle in reverse of the disassembly.

Feb 21, 2010 | 1997 Honda Accord

1 Answer

99 accord rear shock removal


in the trunk remove the cloth panels on the sides and there are your strut towers

Dec 23, 2009 | 1991 Honda Accord

1 Answer

Cv joint replacement giude on my 97 honda accord


to replace the cv shaft on a honda is real easy, remove the tire,remove the lower ball joint cotter pin and nut, remove the bolt that holds the strut to the lower control arm, remove the axle nut in the center of the hub. seperate the lower ball joint from the hub. pull out on the hud a little bit and tap the axle through the hub. tie the hub out of your way so you can work. place a pry bar between the axle and the trany and give it a good snap out, remove the old axle, when installing place the new axle in the transmission and hit the end of it with a dead blow hammer to make sure it seats, then put the axle through strut fork and into the hub reinstall all bolts and tighten. hope this helps good luck. this should only take about 45 min

Nov 26, 2009 | 1997 Honda Accord

1 Answer

Ihave a 1996 honda accord sedan how do you get the


I'm guessing that the hub is turn while you are trying to remove the nut.
(I can't tell from your question) To prevent the hub from turning while you remove the axle nut, put a prybar between two of the wheel studs and against the ground, then loosen the nut.
I hope this helps you.

Nov 14, 2009 | 1996 Honda Accord

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...