Question about 2003 Oldsmobile Silhouette

1 Answer

2003 Olds. Silhouette Van the check engine comes on, also ABS and allso the AWD disabled lights come on. Scan codes are 0128 and 1189. Need to know their meaning

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,297 Answers

Well assuming these are P codes
P0128 = engine coolant temp
P1189 = engine oil pressure

who pulled your codes?
you will get the P0128 if the vehicle is not warmed up prior to scanning and the P1189 if the key is on but the engine is off

obviously, no brake or awd relationship to your concern


can you get the vehicle scanned again by someone else who has the ability to retrieve all codes including B codes and C codes



Posted on Apr 24, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Just bought 2003 Aztec and the AWD is disabled how do i know if something is wrong . We could not find AWD button ? ??


AWD Disable indicator
The AWD Disable indicator is located in the instrument panel cluster. This lamp is used to inform the driver that the AWD system has been disabled and no torque will be applied to the rear wheels during a slip condition. The AWD Disable indicator is controlled by the powertrain control module via a class 2 message.
Powertrain Control Module
The powertrain control module monitors the data from the ABS controller and Rear Drive Module (RDM) for proper operating conditions. If inappropriate conditions are present the PCM commands the differential clutch pump actuator check valve closed, disabling the AWD system. The PCM also commands the AWD Disable indicator on.
Is the All-Wheel Drive Disabled Indicator Always On ?

Is

Oct 25, 2016 | Cars & Trucks

1 Answer

Why does the all-wheel drive keep disengaging when you need it?


Is the All-Wheel Drive Disabled Indicator on ?
An ABS DTC may cause the AWD Disabled light to illuminate. Check for ABS DTCs if no AWD fault is present.


?€¢
The AWD data list can be used to assist in determining which type of fault is causing the AWD Disabled Lamp to illuminate. with a scan tool, verify the above data displays are within specification.
?‡'
AWD temperature disables can be caused by an open circuit.

Using a scan tool, select the Body - Instrument Panel Cluster - Special Functions - Lamp Test mode. In the Lamp Test mode you can turn on or off the instrument panel indicators. All indicators will turn ON when commanded on and OFF when commanded off. The AWD DISABLE indicator should turn on or off as commanded.
?‡'
If the AWD DISABLE indicator is always ON or always OFF, replace the instrument cluster. Refer to Instrument Cluster Replacement in Instrument Panel, Gages and Console.


The AWD disable lamp illuminates when one of the following conditions exists for 5 seconds:
?€¢
The PCM commands the solenoid ON and the voltage feedback remains high, B+.


?€¢
The PCM commands the solenoid OFF and the voltage feedback remains low, 0 volts. This condition is present for 3 key cycles.


?€¢
The PCM detects fluid temp is too high.


You need to have this hooked-up to a professional grade scan tool.

Mar 02, 2015 | 2003 Pontiac Aztek

1 Answer

Oldsmobile silhouette


Hi, the screeching noise could be a wheel bearing,if there is enough play in the bearing this could give a bigger air gap between the abs sensor and reluctor which would bring the abs/tcs lights on.

Jan 20, 2014 | Cars & Trucks

2 Answers

Why is my awd disabled light and abs light comming on?


Most common repair to solve the AWD Disable light problem is replace flow valve on the rear differential and also replace 4 pints of VersaTrak at the same time. (I'm a retired GM engineer.)

Jul 04, 2012 | 2005 Buick Rendezvous

2 Answers

1999 Olds Silhouette -- Problem - ABS & Brake Traction light "coming on" on the instrament panel. Brake fluid level "full". Brake pads & shoes "new". No brake fluid is getting to the REAR brakes....


The ABS light is on because there is a fault in the abs system, The traction control uses the abs system so it will also not work if the abs is not working. You'll need to scan the ABS module to see what code is stored in its memory. Once you have the code you'll have a better idea of what needs to be repaired.

Sep 27, 2010 | Oldsmobile Silhouette Cars & Trucks

1 Answer

Warning light came on for ABS on OLDS Silhouette van. It went off and came on again three days later.


There is a problem with the ABS. Your normal brakes will still work, but you may or may not have a functioning ABS. The system needs to be looked at by a professional. It can be a number of things causing the problem.

Mar 12, 2010 | 2006 Oldsmobile Silhouette

1 Answer

The ABS and TCS warning lights come on simultaneously on a 1999 Olds Sihouette. At first infrequently, then frequently, now always. What is the instrument panel trying to say?


check abs sensors for broken-damaged or disconnected connections if looks good have vehicle scanned for the trouble code sum auto stores such as auto zone /advanced auto will scan and vehicle for free the trouble code will advise if and what sensor or unit is causing problem it gives start point

Oct 21, 2009 | 2000 Oldsmobile Silhouette

1 Answer

Just replaced both front bearings on my 2000 olds silhouette, the traction control light / ABS light is still on. What do i do?


You have to go to a shop and get them to put it on an ABS scanner to see if you broke a wire or the codes just need to be reset. only a scan can tell you what is wrong and it should not cost very much if any thing to do this

Sep 04, 2009 | 2000 Oldsmobile Silhouette

1 Answer

Auto traction and cruise control problems


Just replaced both front bearings on my 2000 olds silhouette, the traction control light / ABS light is still on. What do i do?

Jul 01, 2008 | 2003 Oldsmobile Silhouette

Not finding what you are looking for?
2003 Oldsmobile Silhouette Logo

Related Topics:

241 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8560 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...