Question about 1996 Chevrolet Caprice
Were is it located and how to replace camshaft sensor for chevorolet caprice
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
At the right rear of the engine under the intake manifold and to the left of the oil filter. You will probably need to go under the car to spot it, it's the sensor with a three-wire connector arranged vertically. But you can take it out from above. It's held in with a single bolt with an eight MM head located just above the sensor. Un-clip and remove the electrical connector. Unscrew the bolt with a socket wrench & extension bar. Wiggle and pull the sensor out.
here is a picture.
Posted on Apr 10, 2009
If your car is a 4.0L there are no camshaft sensor. Only crankshaft sensor and timing sensor. Dont know your problem but if your car is not running it is very common that the crankshaft sensor is faulty. It is fairly easy replaced and located just above the crankshaft wheel atthe front of the engine. It is mounted with one 8mm boult.
Posted on May 05, 2009
this is a very very simple procedure. you do not need pics. there is a sensor located at the end of the engine on the far side from the belts. at the top. it has a plug with two wires in it. just remove the two 10mm bolts un hook the plug and reverse the process to reinstall. if you have a factory intake you may have to remove it to access this sensor. just the intake tube.
Posted on Aug 08, 2009
when you are looking at the engine pull off the plastic cover on top then the front cover that covers you timing belt there is a wire harness tha goes right to it in the left upper coner two ten mil bolts and it comes off careful not to drop bolts down in belt that could be bad. it is that easy
Posted on Sep 01, 2009
Tips for a great answer:
Sep 02, 2016 | 2008 Chevrolet Malibu
Oct 10, 2014 | Cars & Trucks
Mar 01, 2010 | 2004 Chrysler PT Cruiser
Aug 07, 2009 | 1994 Chevrolet Caprice
May 02, 2009 | Dodge Stratus Cars & Trucks
Apr 30, 2009 | 1995 Jaguar XJ6
Dec 12, 2008 | 1996 Honda Accord
Aug 10, 2008 | 1995 Chevrolet Caprice
27 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: