Question about 1998 Ford F150 Regular Cab

2 Answers

Code scanner shows exhaust gas recirculation flow what could be t

Code scanner shows exhaust gas recirculation flow excessive

Posted by on

  • Anonymous Mar 26, 2014

    Where is the exhaust gas recirculation position sensor

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 972 Answers

You didnt say if it idles bad but it could be the valve is leaking or stuck open

Posted on Apr 24, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,740 Answers

It is telling you the EGR valve is stuck open. (at least electrically) EGR valves are cheap and available at any major automotive parts supply source. You may be able to remove yours and clean out the carbon that is preventing the needle of the valve from closing securely.

Usually you also have hard starting problems or surging at a constant speed when the EGR valve is stuck open.

Yours may just have an electrical problem that is giving you the code but otherwise working normally.

Thanks for using Fixya and if you need more assistance respond here and someone will get back to you.

Kelly

Posted on Apr 24, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

TROUBLE CODE PO402 FOR 2007 SILVERADO 2500HD CLASSIC 6.6 DIESEL


DTC P0402: Exhaust Gas Recirculation (EGR) Flow Excessive

The engine control module (ECM) tests the exhaust gas recirculation (EGR) flow when the EGR is in operation. EGR desired flow is compared to EGR actual flow. If EGR flow is higher than expected DTC P0402 will set.

Do you know what EGR is ?

Nov 14, 2017 | Cars & Trucks

1 Answer

Had a smog test done got a P0402 code.And had a very bad tune-up changed spark plugs wires filter oil change, plugs stuck, oil was black, could that be the cause of the P0402 code, exhaustive gas flow


www.yourmechanic.com/article/p0402-obd-ii-trouble-code-exhaust-gas-recirculation-flow-excessive-detected- Please go here for a detailed account of the cause. God-Bless!

Oct 12, 2016 | 1996 Ford Explorer

2 Answers

99 maxima ran till it was parked now it turns over will not start gave code p0400 any ideas


The fault is somewhere around the EGR valve - probably the EGR valve or the throttle position sensor.

Before replacing any sensors try removing and cleaning the EGR.

Here's a Youtube link that may be of help to you:

1999 maxima egr Google Search

This link explains about the EGR:
P0400 Exhaust Gas Recirculation Flow Malfunction

CEL code P0400 EGR Flow Malfunction

Mar 27, 2016 | Cars & Trucks

4 Answers

Grand carvan gives p402 code


This is not a cut and dry fault code. This means that more than one thing wrong can set the code in the computers memory. Here is the low down on the P0402 fault code. This is from the OBD2 fault code diagnostic book.

P0402 - Exhaust Gas Recirculation Flow Excessive Detected
Symptoms - Engine Light ON (or Service Engine Soon Warning Light)
- Possible engine hesitation
Possible causes - EGR solenoid valve harness is open or shorted
- EGR solenoid valve circuit poor electrical connection
- EGR volume control valve stuck closed
- Dead (Weak) battery
- Faulty EGR temperature sensor and circuit
- Faulty EGR Valve
- EGR passage clogged
- Exhaust gas leaks

Jan 18, 2012 | Cars & Trucks

2 Answers

I have a code P0401. What is this and how can I fix it?


P0401 - Exhaust Gas Recirculation Flow Insufficient Detected

Possible causes - Harness or connectors (EGR volume control valve circuit is open or shorted.)
- EGR volume control valve stuck closed
- EGR volume control solenoid valve
- Dead (Weak) battery
- EGR passage clogged
- Exhaust gas leaks Possible solution - Clean EGR Valve
- Repair EGR harness or connector
- Replaced EGR volume control solenoid valve
- Replaced EGR volume control valve

Mar 20, 2011 | 1998 Ford Taurus

2 Answers

PO402 trouble code....how is this repaired


Exhaust gas recirculation flow excessive. First things to check is your vacuum hoses to egr position sensor (Dpfe sensor) Egr solenoid & egr valve. If they are off, melted or sucked in they need to be replaced. Usually a specific code will be set for that but not always. Of the three the dpfe sensor also known as egr position sensor is the most common & easiest to replace. Next in order is the egr solenoid. Lastly if it comes to changing egr valve make sure to clean all carbon build up in cavity that egr mounts to. They commonly plug up.

Sep 24, 2010 | 2002 Ford Explorer Sport

1 Answer

Check engine light on and the code is p0402 and how to repair that


CODE PO402 EXHAUST GAS RECIRCULATION SYSTEM EXCESSIVE FLOW DETECTED.POSSIBLE CAUSE EGR PIPE IS CLOGGED RESTRICTED.OR EGR SOLENOID VALVE CLOGGED OR FAILED.

Sep 12, 2010 | Pontiac G6 Cars & Trucks

1 Answer

I have 4 codes: 1- p0401 2- p0401 Pd 3- p0403 4- p0405 what do I have to do to get rid of these codes. what are these and where are they located on a 2004 grand am Thx


p0401
Exhaust gas recirculation-insufficient flow detected
p0403
Exhaust gas recirculation-circuit malfunction
p0405
Exhaust gas recirculation vave position sensor A- circuit low

hope this helps. not sure where they are located

Aug 27, 2010 | 2004 Pontiac Grand Am

1 Answer

1995 mercury villager check engine code p1200 injector open


P0400 = EGR Flow
P0325 = knock sensor (Do not ever change a knock sensor, they don't affect anything and cost $600 to replace for absolutely no gain)
P1200 = I can't find this one. I think it's injector flow
report back on what you find.
Egr flow may be plugged egr passages or a bad solenoid.
--------------
1996 PCED OBDII-Villager SECTION 1B: Description and Operation
Exhaust Gas Recirculation System
Exhaust Gas Recirculation (EGR) System Operation The exhaust gas recirculation (EGR) system (Figure 1 below) recirculates a portion of the exhaust gases into the intake manifold under average vehicle driving conditions to reduce combustion temperatures and exhaust gas NOx content. The amount of exhaust gas recirculated varies according to operating conditions and will be cut completely under:
  • Engine starting condition
  • Low engine coolant temperature condition
  • Excessively high engine coolant temperature condition
  • Engine idling condition
  • High engine speed condition
  • Mass air flow sensor failure
The exhaust gas recirculation (EGR) system on the Villager uses the exhaust gas recirculation/evaporative emission (EGR/EVAP) control solenoid valve to provide vacuum to both the EGR valve and the EVAP canister when commanded by the PCM. If the exhaust backpressure is sufficient to close the EGR backpressure transducer valve, vacuum is sent to the EGR valve and allows EGR gas to flow into the intake manifold. If the exhaust backpressure is not sufficient, the EGR backpressure transducer will remain open and allow vacuum from the EGR/EVAP control solenoid to vent to the atmosphere.
The EGR system monitor, for OBD II regulations, uses an EGR temperature sensor to monitor the EGR system. The EGR temperature sensor is a thermister located in the EGR passageway. When hot exhaust gas is recirculated into the engine, the temperature at the EGR passageway increases. This increase is sensed by the EGR temperature sensor and a signal is sent to the PCM to indicate EGR flow. If the EGR temperature sensor does not detect EGR flow when commanded by the PCM after two consecutive drive cycles, the malfunction indicator lamp (MIL) will be illuminated and a diagnostic trouble code (DTC) will be stored. The MIL will be turned off after three consecutive drive cycles are completed with no malfunctions detected. The DTC will remain stored in the PCM memory until 80 drive cycles have been completed without the same malfunction detected in the system.
Figure 1: Exhaust Gas Recirculation (EGR) System Diagram Item Number Description 1 — EGR/EVAP Control Solenoid 2 — Air Cleaner Housing 3 — Throttle Valve 4 — EGR Temperature Sensor 5 — EGR Valve 6 — EGR Backpressure Transducer 7 — EVAP Canister
Exhaust Gas Recirculation (EGR) Backpressure Transducer Valve The exhaust gas recirculation (EGR) backpressure transducer valve is used to control EGR. The EGR valve is operated by ported vacuum, but the ported vacuum will normally be vented off at the EGR backpressure transducer valve. As rpm increases, exhaust pressure increases and pushes on the diaphragm in the EGR backpressure transducer valve and closes the vacuum vent.
Figure 2: EGR Backpressure Transducer Value
Item Number Description 1 — Throttle Valve 2 — Vacuum Port 3 9D475 EGR Valve 4 9F452 EGR Backpressure Transducer Valve 5 — EVAP Canister 6 — EGR/EVAP Control Solenoid 7 — Vent
EGR/EVAP Control Solenoid The exhaust gas recirculation/evaporative emission (EGR/EVAP) control solenoid (Figure 3) is controlled by the powertrain control module (PCM). The EGR/EVAP control solenoid controls vacuum to both the exhaust gas recirculation (EGR) valve and to the evaporative (EVAP) emission canister. When the EGR/EVAP control solenoid is off (12 V signal from the PCM) vacuum is supplied to both the EGR valve and to the EVAP canister. When the EGR/EVAP control solenoid is on (ground supplied by PCM) vacuum is vented to the atmosphere keeping the EGR valve closed and no vacuum to the EVAP canister. The PCM will command the EGR/EVAP control solenoid on at:
  • Engine starting condition
  • Low engine coolant temperature condition
  • Excessively high engine coolant temperature condition
  • Engine idling condition
  • High engine speed condition
  • Mass air flow sensor failure
Figure 3: Exhaust Gas Recirculation/Evaporative Emission (EGR/EVAP) Control Solenoid
Exhaust Gas Recirculation (EGR) Temperature Sensor
The exhaust gas recirculation (EGR) temperature sensor (Figure 4) is a thermister type sensor that monitors the temperature of the exhaust in the EGR passageway. As the EGR flow increases, the temperature increases. This process creates a change in the resistance of the sensor, which decreases as the temperature increases. The signal is sent to the powertrain control module (PCM) to indicate that the EGR system is working properly. If the EGR temperature sensor does not change resistance as the PCM expects on two consecutive drives, the malfunction indicator lamp (MIL) will be illuminated and a diagnostic trouble code (DTC) will be stored.
Figure 4: EGR Temperature Sensor Exhaust Gas Recirculation (EGR) Valve
The exhaust gas recirculation (EGR) valve (Figure 5) recirculates portions of the exhaust gas back into the intake manifold to reduce the amount of the NOx released during combustion and to reduce combustion temperature. The amount of exhaust gases that are released into the engine is proportional to the load on the engine.
Figure 5: EGR Valve

Mar 20, 2009 | 1995 Mercury Villager

Not finding what you are looking for?
1998 Ford F150 Regular Cab Logo

94 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

78257 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

fordexpert

Level 3 Expert

5653 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...