Question about 2007 Toyota Tundra

1 Answer

I just bought an 07 tundra double cab trd it has a 3'' daystar body lift I want to know how and what would be the best way to remove it

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 4,669 Answers

First you need to get a set of stock body bolts. Then remove the body bolts from the truck. Jack up the body slightly and remove the 3 inch spacers one at a time from between the body and the frame. Then let the body back down on the the stock rubber mount and put a stock length bolt back in.

Posted on Apr 24, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to install seat covers on 2013 Toyota tundra rear seat


Here's a video on installing seat covers for your Tundra, 07 13 Toyota Tundra factory seat covers installed I had a 2004 Tundra,bought seat covers from Dealer and installed,real easy.I had leather seats.Here's a video of my Tundra I sold,you will see the seat covers,cause I show them. 04 TOYOTA TUNDRA SR5 TRD THE DESERT SAND WALK THRU

Feb 14, 2016 | Toyota Cars & Trucks

1 Answer

Trailer marker light fuse 2006 tundra Double cab


have you checked the tow tail light fuse or the tow tail light relay?

Aug 15, 2015 | 2006 Toyota Tundra

1 Answer

How to get seat back off or to fold down in back seat of Tundra double cab truck


If its the current body style that the rear seats do not fold down. The seat can be removed by removing the nix bolts that hold it to the vehicle. The. Pull up on the seat back to disengage the back retainers.

Apr 07, 2013 | Toyota Cars & Trucks

1 Answer

TOYOTA TUNDRA /TRD SUPERCHARGER DOES NOT MATCH


talk with speed shops if you are in doubt of the dealer info. The unit may be too big for your application and could do serious damage if not fitted correctly.

Apr 01, 2013 | Cars & Trucks

1 Answer

How to change cab mount bushings


Remove Cab bolts and lift body with lift. If lift is not accessible then remove mount bolts on one side and jack with block of wood to reduce body damage possiblity (Use body line). Jack body just high enough to remove bushing. Use caution watch hands and avoid pinch points whenever possible.

Jan 10, 2013 | Ford F-250 Cars & Trucks

1 Answer

How do I start a Toyota Tundra TRD without the key?


You dont. contact dealer. Key has transponder that communicates with computer. Body control module and engine control modules. no communication no go unless you can find a "gone in 60 seconds": thats it

Dec 10, 2012 | Cars & Trucks

1 Answer

How do i reset the tire warning light on my 07 tundra crew cab


If the problem is fixed you won;t have to reset it provided you haven't driven too many miles. Once you have driven too many miles you will have to return to the Toyota dealer to have it reset.

Jun 27, 2010 | 2007 Toyota Tundra

1 Answer

I changed the bulb for my check engine signal, but still won't light up. Any ideas? 2004 Toyota Tundra, double cab v8


Check all your fuses. Some models have a fuse for this, and if that checks out then you either have a computer problem or instrument cluster problem which you should get diagnosed professionally before proceeding.

May 06, 2010 | 2004 Toyota Tundra

2 Answers

Need to replace cargo & third break light how do i


if its the same as an 06 Tundra, you should be able to remove the lense cover from the back of your truck cab with a screwdriver and pull the light bulbs out...Do not remove the screws below the lense cover that removes the fixture, they have a screw insert that will fall into your truck's body and get lost.....hehehehe I learned that from my own experience...good luck!

Mar 04, 2009 | 2008 Toyota Tundra

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

155 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...