Question about 1992 Toyota Cressida

1 Answer

Head bolt tourqe settings on a toyota cressida

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,796 Answers

Cylinder head bolt removal sequence


Removal sequence: Front 3 7 11 13 10 6 2 1 5 9 14 12 8 4

***CAUTION*** The above sequence must be followed during removal as to avoid warpage of the cylinder head unit

Reverse sequence to install, Step 1: Torque to 10 Ft/Lbs Step 2: Torque to 18 Ft/Lbs Step 3: Torque to 25 Ft/Lbs Step 4: Turn an additional 90 degrees Step 5: Turn an additional 90 degrees Step 6: Torque the 2 recessed 8mm bolts to 13 Ft/Lbs *** CAUTION *** engine uses Torque To Yield head bolts (TTY) that permanently stretch during the initial installation. New head bolts must be used when cylinder head is replaced or re-installed to obtain proper Torque

Don't forget to rate this answer, Good Luck

Posted on Apr 24, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Toyota 2kd engine cylinder head tighten tourqe in n-m


Valve clearance is .20mm for the intake and .30mm for the exhaust.
The minimum diameter specs are: 11.6 mm for head bolts, and 12.6 mm for main bearing bolts.

Jul 10, 2013 | Cars & Trucks

1 Answer

Toyota hilux 2kd cylinder head tourqe


The 2kd engine has same torque settings whether it goes on a hilux, or srx or other. The minimum diameter specs are: 11.6 mm for head bolts, and 12.6 mm for main bearing bolts.
http://www.auto-searchphilippines.com/files/Toyota_innova_E_Specifications.pdf

Jul 10, 2013 | Cars & Trucks

1 Answer

Toyota cressida mx 83 cylinder head bolt tightening torque


petrtol engine alloy head then around 65 if this oldie is cast iron head then 75 is ok but a higher setting can be used to make sure its down and you dont have to do it again after a set time of say 85/90

Apr 13, 2013 | 1992 Toyota Cressida

1 Answer

Need head bolts tourqe sequence for a 89 tercel


1989 L4 headbolt sequence:
Cylinder Head Bolt Torque Sequence809142031993 L4 headbolt sequence:
Cylinder Head Bolt Torque Sequence80914199they appear to be the same,other than the torque angle. good luck!

Oct 20, 2011 | 1993 Toyota Tercel

1 Answer

Head tourqe specs for 403 olds and bolt tightening


Fig. : Cylinder head torque sequence, 260, 307, 350 403 Oldsmobile built engines

5c04c01.jpg


On the V8, tighten the bolts, in the sequence illustrated, to 100 ft. lbs. When all bolts have been tightened to this figure, begin the tightening sequence again, and torque all bolts to 130 ft. lbs.

On V6's, tighten all head bolts in sequence to the following torques:
* All except bolts 5, 6, 11, 12, 13 and 14 - 100 ft. lbs.(19-135.5 Nm)
* Bolts 5, 6, 11, 12, 13, and 14 - 41 ft. lbs. (19-55.5 Nm)
* All bolts except 5, 6, 11, 12, 13, and 14 - 142 ft. lbs. (19-192.5 Nm)
* Bolts 5, 6, 11, 12, 13, and 14 - 59 ft. lbs. (19-80 Nm)

9fb545e.jpg

Hope this help (remember comment and rated this).

Mar 29, 2010 | 1984 Oldsmobile Cutlass

1 Answer

Bad Alternator


to remove from alternator from the engine disconnect battery ,
loose the belt on the top of the alternator you can see adjustable loose the bolt remove belt also remove the wires behand the alternator it is 8mm spaner or 10mm.
boton of the alternator there is long bolt remove thet bolt then careful your fingers.
that is all job done.

Oct 15, 2008 | 1986 Toyota Cressida

1 Answer

Bad Alternator


disconnect battery,loose the adjusting bolt remove the belt remove wires behind the back of the alternator after remove botton bolts.

job done

Oct 15, 2008 | 1985 Toyota Cressida

1 Answer

Toyota Vitz Engen Manual


If your head is leaking water you will need to replace the gasket and have the head checked out. Tightening the bolts will not do any good. Has the engine been hot. How do you know your water leak is in the head...

Oct 07, 2008 | 2007 Toyota Yaris

2 Answers

'90 Toyota Cressida Radiator Problems


Antifreeze from the radiator does go into your engine to cool the engine down thats normal but if antifreeze is found in the engine oil then you have a problem, like bad head gasket or cracked engine head or engine block. Hope I answered your question. If I did leave me a FIX YA

Aug 14, 2008 | 1990 Toyota Cressida

2 Answers

86 toyota cressida. how to remove the upper starter bolt since there is NO clearance for any sockets or your hands?


Holy hell these engines are tight. I had the same prob with my 88. Finally figured it out with about a good foot and a half of ratchet extensions. It'll help if they have wobbles on the end. You'll have to guide the socket by feel (cause you can't see the bolt, but once you're on it the extentions should get your ratchet in a spot where you can give it a good 1/4 turn

best of luck!

Jul 23, 2008 | 1988 Toyota Cressida

Not finding what you are looking for?
1992 Toyota Cressida Logo

905 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8518 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...