Question about 2002 Dodge Caravan

1 Answer

Rear brake light out. How do I get to the lamps?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 117 Answers

Should be easy on that one open rear hatch there should be 2 screws take them out then the outside part should pop out becareful not to brake it then on the back side you should be able to unplug it and turn the round plastic pieace and pull out then take light bulb out

Posted on Apr 24, 2010

Testimonial: "Your solution right on. Actually the 2 fasteners are "snap ins" instead of screws. Thanks"

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

08 Buick lucerne cxl. Third brake light works as well as front signal lights. No rear brake lights or turn signals. Tail lights and headlights and third brake lights works. Bulbs good. Help


Stop Lamps
The brake pedal position sensor is used to sense the action of the driver application of the brake pedal. The body control module (BCM) provides a 5-volt reference voltage and low reference to the brake pedal position sensor. The position sensor provides an analog voltage signal back to the BCM that will increase as the brake pedal is applied. When the brake is applied, the BCM will then apply battery voltage to the left and right stop/turn signal lamp supply voltage circuits and the center high mounted stop lamp (CHMSL) supply voltage circuit illuminating the stop lamps. At the same time the BCM applies battery voltage through the signal circuit to the transmission control module (TCM) and the engine control module (ECM) indicating that the brakes are applied.
Ground for the stop lamps is supplied as follows:
• G402 provides ground for the left rear stop/tail/turn signal lamps
• G403 provides ground for the right rear stop/tail/turn signal lamps
• G301 provides ground for the CHMSL
The stop lamps on this vehicle will not illuminate unless the ignition is in the accessory, run, or crank positions. When the ignition is in the OFF position the stop lamps will not illuminate when the brake pedal is applied.
Battery voltage from the LT TRN/SIG and RT TRN/SIG fuses located in the rear fuse block is also used by the body control module (BCM) for stop lamp operation.

Turn Signal Lamps
Battery voltage supplied to the body control module (BCM) from the fuses listed below is used for turn signal and hazard lamp operation.
• LT TRN/SIG fuse for the left turn signals
• CTSY/RF TRN fuse for the right front turn signal
• RR TRN/SIG fuse for the right rear turn signal
When the turn signal switch is place in either the LEFT or RIGHT position, ground from G300 is applied through the turn signal switch signal circuit to the BCM indicating the turn signal request. In response to this signal, the BCM applies a pulsating voltage to the front and rear turn signal lamps supply voltage circuits cycling the lamps ON and OFF. At the same time the BCM sends a GMLAN serial data message to the instrument panel cluster (IPC) to cycle the appropriate turn signal indicator ON and OFF.
Ground for the turn signal lamps is supplied as follows:
• G104 provides ground for the left and right front turn signal lamps
• G402 provides ground for the left rear stop/tail/turn signal lamps
• G403 provides ground for the right rear stop/tail/turn signal lamps

Do you have a factory scan tool (tech2) ? Your best bet , take it to the dealer .

Sep 08, 2017 | Buick Cars & Trucks

2 Answers

Brake lights 2001 Oldsmobile aurora


switch may have failed under dash at brake pedal arm or got unplugged but BIG FEET

Sep 10, 2015 | 2001 Oldsmobile Aurora

3 Answers

Hi there. my problem is every time i step on the brake an orange light on the dash appears. the symbol that keeps illuminating is a car with what looks like the rear lights on at the rear. can anybody...


Yes. The reason it looks like the lights on the rear of the car and the reason it comes on every time you are hitting your brakes, is because your lamp-out module is trying to tell you that you have a brake lamp that is not working. This is normal function if you ave a burned out bulb or a broken wire in your brake lamps. It does not set any codes, so there is nothing to "reset". Just fix the brake lamp and the warning lamp will go away.

Aug 16, 2011 | 1994 Toyota Celica

1 Answer

Rear brake light out


First of all check the brake light fuse on the fuse box marked brake/rear lights.
Please use the voltmeter range in your multimeter to check for the voltage on your rear light assembly while the brake pedal is kicked. If there is supply then the lamp is faulty , the ground to the lamp assembly is faulty. remove the assembly and check holder of lamp .
If there is no voltage then the brake fluid pressure switch is faulty or there is break on the wire to the switch or to the rear assembly.

Jan 22, 2011 | 2008 Mazda Mazda3 Hatchback

2 Answers

Have no rear parking lamps or dash lights when


In that car the fuse for the rear lights is also the same fuse for the dash lights. They did that so you would know when your tail light were out. Replace the fuse.

Apr 03, 2010 | 1995 Pontiac Bonneville

1 Answer

My brake light and a light that looks like a car with //\ at the bottom are on. brake fluid is fine and all rear lights are working


Your brake light is on because your brake fluid is probably low in the brake master cylinder. As the brakes wear, the fluid level drops proportionally. A switch in the brake master cyluinder measures the fluid level.

The //\\ light indicates you have a burnt out tail or brake lamp. All of the rear lamps are checked by a sensor, including the one in the rear window.

Oct 20, 2009 | 1996 Toyota Avalon

1 Answer

Rear window break light


You either have a 'single filament' bulb installed in a 'dual filament' brake lamp socket ... OR .. you have a 'dual filament' bulb short circuited internally. Check your rear brake lamp bulbs (supposed to be 'dual filament' - two contacts on their bottoms). When you step on the brake pedal, do your dash lights LIGHT UP? A 'cross circuit' exists between brake lamp circuit and parking lamps circuit.

Apr 15, 2009 | 2001 Hyundai Elantra

1 Answer

How to reset rear light out indicator lamp


There is no "reset" for the rear lamp failure system. The light goes out automatically wehen all of the rear lamps (brake and tail) are working. Did you check the brake light in the lower part of the back window? Also note that the lamp sensor is very sensitive; it needs to see all the bulbs to be the same wattage. The wattages can vary from nfgr to mfgr. Let me know waht you find on the 3rd brake lamp in the back window.

Jan 11, 2009 | 2000 Toyota Camry

Not finding what you are looking for?
2002 Dodge Caravan Logo

Related Topics:

53 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

79123 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...