Question about 2004 Volkswagen Touareg
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Once you turn the octagon screw to release the light and push it forward or out of the front of the vehicle, take a light and look to the left side if your working on the driver side or the right side if your working on the passenger side and you will see a metal tab release. Take a long flat head screw driver and press down toward the ground gently. The headlight will be released and the whole assembly comes out as it has a plug/electrical connection on the back of the assembly. I just replaced my headlights, I have a 2004 Touareg with 44,000 miles and have already gone through 2 sets of headlights. The VW dealer will want $300.00 to replace 1 side! They have lost their minds. How long have you had yours and what engine do you have? Just curious if you have had any problems? My Touareg has just needed tires, brakes, headlights. I have done the brakes as well. They want around $900.00 + for front plus about 8 for the rear. If you need anything just hollar and if you have any questions just let me know if I canhelp.
Posted on Sep 26, 2008
On your steering wheel there is a button bottom right it should look like two squares. That is the menu button. Scroll through the menu settings until Time appears. Push in on the thumb wheel above the menu button to select. After that roll the wheel up or down to adjust the time and press in when finished.
Posted on Jan 10, 2009
I have a relative who has a touareg, very nice piece of equipment though very sophisticated, you need to get it on a diagnostic machine it may be a fault with the temp sensor or the rad control unit, too many solutinons without a machine, good luck
Posted on Mar 23, 2009
Same as any other vehicle.
1. Raise and support vehicle
2. Remove tire/wheel
3. Loosen/remove the two caliper bolts
4. Slide caliper off the rotor.
5. Use a C-Clamp to depress the caliper piston
6. Remove old pads from caliper
7. Install new pads on caliper
8. Install caliper/tighten caliper bolts
9. Install tire/wheel
11 Move to next wheel/repeat
Some people take a turkey baster and remove some of the brake fluid from the master cylinder prior to depressing the caliper piston because it can over flow. If you choose to do that just add the fluid back when finished so it is at its proper level.
Posted on Sep 12, 2009
Tips for a great answer:
Jun 09, 2015 | 2004 Volkswagen Touareg
Nov 04, 2009 | 2004 Volkswagen Jetta
Aug 15, 2009 | 2004 Volkswagen Touareg
Apr 22, 2009 | 2005 Volkswagen Touareg
Mar 23, 2009 | 2004 Volkswagen Touareg
Feb 02, 2009 | 2006 Volkswagen Touareg
Jul 30, 2008 | Volkswagen Touareg Cars & Trucks
88 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: