Question about 1995 Dodge Ram 2500

1 Answer

1995 dodge cummins pickup will start, but not stay running. The tach does not work, nor does the alternator. Replaced alternator with a new one. No voltage going the engine speed sensor. No voltage going to fuel pump solenoid, All fuses and relays are good.

Posted by on

  • ahetlan Apr 25, 2010

    my check engine light will not come on either, nor will my wait to start light. The only gauge that works is my oil pressure gauge.

  • ahetlan Apr 27, 2010

    I spent 5 hours in the shop checking wires and I got the problem fixed.

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 244 Answers

Battery or batteries are N.F.G.

Posted on Apr 24, 2010

  • 1 more comment 
  • stepmckirgan Apr 25, 2010

    Believe that has external regulator which is inside the computer is your check engine light on.

  • stepmckirgan Apr 25, 2010

    gotta keep it simple , ensure all grounds ae clean and tight even near fuse panel inside cab check grounds there as well

  • stepmckirgan Apr 27, 2010

    Good Deal,

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1995 nissan pickup. When i start the truck none of the cab electrical works. the battery kept dying so i replaced it. it seems to be starting the engine ok but could the alternator be going out?


Put a voltmeter on the battery with the engine running. It should read at least 13.5 volts to know the alternator is working good. If it reads below 13 volts, it is not working good, may not be working at all.
What cab electrical circuits are not working? Or are they working now?

Dec 10, 2013 | 1995 Nissan Pickup

1 Answer

I have a 1995 dodge ram 2500 cummins the abs and brake lights are on and the cruise control is not working? I have replaced the master cylinder and the speed sensor in the rear axle


The warning lights mean there should be a trouble code stored in the body computer. I would start there.
When the ABS system is inop it may prevent the cruise from working too. Sometimes a hydraulic brake system failure will turn the ABS light on too. After repairs you would need to scan the system to turn the light off with most vehicles.
Are the brake lights in the rear of the truck staying on ?

Jul 03, 2012 | 1995 Dodge Ram 2500

1 Answer

2005 Dodge Cummins 2500 Will not start unless either is applied - Runs good after it does start


check grid heater selenoid make sure power goes true with key on
(power at grid heater) if no power replaced selenoide (special selenoide)
do not use any other then specified will not work for long 1 or 2 days and will fail shortly
if power reach gride heater disconect wire at grid heater check gride heater with
owm meter for ressistance if that fails replaced grid heater

Apr 02, 2011 | 2005 Dodge Ram Srt 10 Pickup

1 Answer

My 1995 Jetta GL 2.0L has Intermittent tach problems. Sometimes tach will work normally and then it falls to zero and stays there.Then it might bounce back and forth. Also, how is the tach hooked up?


The most likely problem is that you need a new voltage regulator put in the alternator,the tach runs off of it and when the tach quits i think you will find that the car also stops charging,the brushes for the alternator are in the regulator and a new one usually fixes the problem.

Apr 07, 2010 | 1995 Volkswagen Jetta

2 Answers

I need the procedure for changing the head gasket on a cummins b engine in a 1995 dodge pickup


Sorry you are having trouble.
This is a major under job. You did not specify the engine size.
A manual will be a great help to you but I will tell you the basics
Remove the exhaust from the head (difficult)
Remove the intake manifold(difficult)
Remove everything else connected to the head(difficult)
Remove head(easy)
Install new gasket (easy)
Put it all back together
I hope this helps

Apr 04, 2010 | 1995 Dodge Ram 3500

1 Answer

The engine in my Dodge pickup,diesel cummins, won't start,it has fuel, the manifold heater isn't working and the lift pump isn't working anymore, both were working when we started working on it. I...


The fuel heater is connected with the fuel pump, if it does not work, the fuel pump won't pump. Manifold heater has separate relays, fuse, and selenoids which are under the driver battery. If you have been working on it a lot make sure the battery is charged up.

Jan 11, 2010 | 2001 Dodge Ram 2500 Truck

3 Answers

Charging problem on 1996 Dodge Ram 3500 Cummins Turbo Diesel


I had the same problem on a 94 dodge with the cummins. It seems the crank sensor that reads from a notch on the harmonic balancer was the problem Without this sensor reading that the engine is running the alternator wont charge. Possibly the same problem with yours

Mar 25, 2009 | 1996 Dodge Ram 3500 Club Cab

Not finding what you are looking for?
Cars & Trucks Logo

301 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8516 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...